AM4 BIOS info

Was bios 4.70 for x470 Taichi pulled? I just checked the site today (5/9) and it's not there anymore. I have it on my board with a 5800x no issues at all. https://www.asrock.com/MB/AMD/X470%20Taichi/index.asp#BIOS

jda wrote: PelaAsrock wrote: Board model: B550 PG itx/ax BIOS version: P 2.10 CPU: 3900x RAM: Corsair Vengeance LPX CMK32GX4M2D3600C18 32Gb Notes: Any BIOS above 1.10 (that I know are more focused on the 5000 series) gives me primarly problems when I start my PC from a Cold Boot or when re starting it. It will crash when trying to initiate windows, if I enter in SAFE MODE I can restart and everything seems fine. No issues while using it. I will try what happens if I disable XMP on my RAM with the newer BIOS like the latest I have now installed. It's annoying because I really want to use some of the newer features that new BIOS brings to the table like SAM for instance and I can only manage stability while starting my PC with 1.10 Bios or prior ones. I have the same MB but my RAM kit is CMK64GX4M2E3200C16 2x32GB which is not the on QVL. With the latest BIOS, my PC resets (like power off then on) in the first 5 minutes when I start it up from off or when I restart it from windows. It happens like in 4 out of 5 startups. If it does not reset in the first 5 minutes, it will continue to run stable for a few days until I shut it down or restart it from Windows. Is your problem the same?

Yeap is more or less the same. The thing is that I've tested my RAM and they have no issues and right now I'm in BIOS P.1.10 and everything works fine, not a single re start out of nothing, nor any problem with cold boots.

I'm starting to think that might be more CPU related, like if some new features doesn't play well with my 3900x.

This forum is incredibly dead, not a single Official rep that might help. Did you tried any other way to contact Asrock about it?

BTW like you, my restarts or problems with booting do not leave any BSOD data, bar the windows Event Viewer one, but Bluescreenview, or similar software do not grab any detail.

I dunno beecause even without XMP I had some issues. Bizarre stuff, so far I really liked the board but these issues with new BIOSes are annoying. Maybe at some point I'll try a new kit of RAM, but I think I'll stick to the old BIOS, not precisly my best time in terms of finances so I do not have many choices. Good luck with the new Asus mobo man! and thanks for the help.

pokuly wrote: Board: B550 Steel Legend BIOS version: 2.00 CPU: 5900x RAM: 2x16GB G.Skill B-Die@3733 My generic Fujitsu Siemens USB keyboard already was 2 times not detected on bootup since the 2.00 release. I have to shutdown and start again. A reboot is not enough. Ryzen Master still shows the wrong value for VDDCR if set in UEFI -> OC Tweaker\External Voltage Settings

I quote myself here because i have to add my USB MX-518 mouse hung itself 2 times since the 2.00 update. It stutters and shortly after losses the key associations done in the gaming software.
It is 2021 and USB simply being broken in a mainstream product is a bad joke.
I regret switching to this AMD crap. I have no idea how i will be able to sell this board with this build in errors.

Board model: B450M-HDV R4.0
BIOS version: 4.6
CPU: Picasso APU
RAM: 16

Notes:

4.6 has much improved over vendor-delivered 3.7 version, e.g. 1 mouse failed on me.

Users should be aware that a power cycle can take 40 seconds during which they might think that the mainboard has "frozen". Just be patient and wait until power-cycle does finish eventually!

UEFI explicitly states that - while in superfast boot mode - the user has to "clear CMOS" to force entry into UEFI menu in case of operating system not allowing to go to UEFI menu. Or in case of OS crash / BSOD (Blue Screen Of Death in MS OS).

Under Linux, I found this to be wrong. The DELete key even now will summon the UEFI menu, contrary to what UEFI itself states.