ASRock.com Homepage
Forum Home Forum Home > Technical Support > AMD Motherboards
  New Posts New Posts RSS Feed - AGESA 1.0.0.6
  FAQ FAQ  Forum Search Search  Events   Register Register  Login Login

AGESA 1.0.0.6
 Post Reply Post Reply Page  <1 1112131415 21>
Author
Message
  Topic Search Topic Search  Topic Options Topic Options
BoneCrusherXes View Drop Down
Newbie
Newbie


Joined: 07 Jun 2017
Location: Berlin
Status: Offline
Points: 43 		Post Options Post Options   Thanks (0) Thanks(0)   Quote BoneCrusherXes Quote  Post ReplyReply Direct Link To This Post Posted: 25 Jun 2017 at 10:42pm
The F4-3200C14D-16GTZ usuallly works really good with Ryzen. I have used the F4-3200C14D-32GTZ (2x16gb) on the K4 @ 3066mhz and never had any post problems with it.
I read about several people in "hardwareluxx.de" forum running the F4-3200C14D-16GTZ @ 2933 or higher, so if you cant boot at all with this kit it makes me think there is a problem with your ram kit.
ASRock X370 Taichi, AMD Ryzen 7 1700X @ 3,9 , Noctua NH-D15
2x16GB G.Skill F4-3200C14D-32GTZ @3200 14-13-13-26-42 1T GearDown Enabled
MSI Geforce GTX 1070 GAMING X 8G
Back to Top
Jakob View Drop Down
Newbie
Newbie


Joined: 25 Jun 2017
Status: Offline
Points: 26 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Jakob Quote  Post ReplyReply Direct Link To This Post Posted: 25 Jun 2017 at 10:52pm
Hey there! Yes, one would think that. But I can run both g.skill modules and correctly read their SPD and XMP info whenever I run them with another module. Just not by themselves.
I can not determine there is any flaw within them.
I don't want to go OT too much but I will try installing them with the next bios update and sell them if they don't work.
If you have any idea how I could further investigate them I would appreciate suggestions via PM

Edited by Jakob - 25 Jun 2017 at 10:53pm
Back to Top
renat View Drop Down
Newbie
Newbie


Joined: 25 Jun 2017
Status: Offline
Points: 3 		Post Options Post Options   Thanks (0) Thanks(0)   Quote renat Quote  Post ReplyReply Direct Link To This Post Posted: 27 Jun 2017 at 4:22am
Hello. Im using Ryzen 7 1800x + Asrock Killer Sli and 2x16Gb Corsair Vengeance LPX cmk32gx4m2b3000c15 3000MHz (bios 2.50). My memory only working at 2133, If I put a value higher (2993), then the system no longer boots. Do you think they can fix this with a new firmware (bios version)?

Edited by renat - 27 Jun 2017 at 4:22am
Back to Top
kingnubian View Drop Down
Newbie
Newbie


Joined: 15 May 2017
Location: Canada
Status: Offline
Points: 14 		Post Options Post Options   Thanks (0) Thanks(0)   Quote kingnubian Quote  Post ReplyReply Direct Link To This Post Posted: 29 Jun 2017 at 1:40am
Updated to 2.60 on my AB350 Pro 4 with negative results. On 2.50 I had ram , Corsair LPX 2x8GB 3200Mhz, running at 2933 (1.35v) and cpu clocked at 3.8ghz (1.35v) without much effort. 2.60 will allow the identical cpu overclock to 3.8ghz but ram at anything above 2133mhz results in boot failure.

Timings are indicated correctly for my memory though. I had to revert to 2.50. 

Anyone else with a similar setup have success with 2.60 and if so what are your settings?


Edited by kingnubian - 29 Jun 2017 at 1:41am
Back to Top
wardog View Drop Down
Moderator Group
Moderator Group


Joined: 15 Jul 2015
Status: Offline
Points: 6447 		Post Options Post Options   Thanks (0) Thanks(0)   Quote wardog Quote  Post ReplyReply Direct Link To This Post Posted: 29 Jun 2017 at 2:46am
Originally posted by renat renat wrote:

Hello. Im using Ryzen 7 1800x + Asrock Killer Sli and 2x16Gb Corsair Vengeance LPX cmk32gx4m2b3000c15 3000MHz (bios 2.50). My memory only working at 2133, If I put a value higher (2993), then the system no longer boots. Do you think they can fix this with a new firmware (bios version)?


Try them at 2667. Set XMP but lower the mem MHZ to 2667. Or, take off XMP and set what needs set manually

Google shows 2667 is possible.


This kit should be Hynix based unless Corsair has diff revisions:
Back to Top
renat View Drop Down
Newbie
Newbie


Joined: 25 Jun 2017
Status: Offline
Points: 3 		Post Options Post Options   Thanks (0) Thanks(0)   Quote renat Quote  Post ReplyReply Direct Link To This Post Posted: 29 Jun 2017 at 5:48am
Thx. Its working.




Edited by renat - 29 Jun 2017 at 5:52am
Back to Top
wardog View Drop Down
Moderator Group
Moderator Group


Joined: 15 Jul 2015
Status: Offline
Points: 6447 		Post Options Post Options   Thanks (0) Thanks(0)   Quote wardog Quote  Post ReplyReply Direct Link To This Post Posted: 29 Jun 2017 at 6:03am
Originally posted by renat renat wrote:

Thx. Its working.




Damn! Them #'s in AIDA look awesome.

Feel better there I bet. I would!
Back to Top
wardog View Drop Down
Moderator Group
Moderator Group


Joined: 15 Jul 2015
Status: Offline
Points: 6447 		Post Options Post Options   Thanks (0) Thanks(0)   Quote wardog Quote  Post ReplyReply Direct Link To This Post Posted: 29 Jun 2017 at 6:15am
I'm maybe a little late posting this.

So to those that knew of this, a reminder. To those that weren't aware of this page, it's AWESOME reading and knowledge.

Explanations of changes and additions made with AGESA 1.0.0.6.
https://community.amd.com/community/gaming/blog/2017/05/25/community-update-4-lets-talk-dram
Back to Top
Zach1928 View Drop Down
Newbie
Newbie


Joined: 30 May 2017
Status: Offline
Points: 107 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Zach1928 Quote  Post ReplyReply Direct Link To This Post Posted: 30 Jun 2017 at 2:23am
Originally posted by kingnubian kingnubian wrote:

[URL=][/URL]Updated to 2.60 on my AB350 Pro 4 with negative results. On 2.50 I had ram , Corsair LPX 2x8GB 3200Mhz, running at 2933 (1.35v) and cpu clocked at 3.8ghz (1.35v) without much effort. 2.60 will allow the identical cpu overclock to 3.8ghz but ram at anything above 2133mhz results in boot failure.

Timings are indicated correctly for my memory though. I had to revert to 2.50.?

Anyone else with a similar setup have success with 2.60 and if so what are your settings?



What voltage do you have going to the RAM? I could get 2400mhz on mine at the base 1.2v, but I had to go up to 1.35v to get 2666
Back to Top
kingnubian View Drop Down
Newbie
Newbie


Joined: 15 May 2017
Location: Canada
Status: Offline
Points: 14 		Post Options Post Options   Thanks (0) Thanks(0)   Quote kingnubian Quote  Post ReplyReply Direct Link To This Post Posted: 30 Jun 2017 at 5:41am
Originally posted by Zach1928 Zach1928 wrote:

Originally posted by kingnubian kingnubian wrote:

[URL=][/URL]Updated to 2.60 on my AB350 Pro 4 with negative results. On 2.50 I had ram , Corsair LPX 2x8GB 3200Mhz, running at 2933 (1.35v) and cpu clocked at 3.8ghz (1.35v) without much effort. 2.60 will allow the identical cpu overclock to 3.8ghz but ram at anything above 2133mhz results in boot failure.

Timings are indicated correctly for my memory though. I had to revert to 2.50.?

Anyone else with a similar setup have success with 2.60 and if so what are your settings?



What voltage do you have going to the RAM? I could get 2400mhz on mine at the base 1.2v, but I had to go up to 1.35v to get 2666

I'm using 1.35v for the memory and it runs 100% stable at 2933mhz. Bios 2.50 as 2.6 just was a mess for me.
Back to Top
 Post Reply Post Reply Page  <1 1112131415 21>
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.04
Copyright ©2001-2021 Web Wiz Ltd.

This page was generated in 0.359 seconds.