AGESA 1.0.0.6

ithrax wrote: wardog wrote: Alcide wrote: My memory is CMK16GX4M2B3000C15 Ick. Hynix. Single rank, single sided. But still Hynix Have you tried bumping SoC just a pinch to 1.1 or 1.175, DRAM Voltage up an additional +0.025 to 1.375, procODT to 53.3, and surely MEM_VTT to 0.690 or maybe even 0.700 yet? Try those. FIRST, reset to UEFI Defaults in your BIOS, Save and Exit, then go back straight into the BIOS and set XMP to 3200MHz. THEN, make those four changes I suggest above. Make sure by looking that XMP sets your 3000 top timings to 15-17-17-17-35 too Post back the aftereffects of doing so please. edit: 3000 wardog, not 3200 I just wanted to post my experience with this. I have the same motherboard and RAM kit. I managed to get my memory stable at 2933MHz by selecting the XMP profile for 2933/3000 MHz and upping the DRAM voltage to 1.375. I also set the procODT to 53.3. I ran memtest for an hour with no errors.  The timings defaulted to what you posted when I selected the XMP profile. I did not edit SoC voltage or MEM_VTT.

Awesome. Thanks for joining and posting that ithrax.

At 1.375 DRAM Voltage, IIRC MEM_VTT should have changed automatically to 0.690 right?




I've spent many days and nights tweaking this or that mem Kit on my SLI/ac. Those #'s I posted should at least get most Kits to 2666 or better.

They are a good starting point anyways to change a Users outlook concerning their mem Kit, processor and motherboard.


Again, Thanks for posting that. It's posts as your that keep me doing what I do here.

Awesome. Thanks for joining and posting that ithrax. At 1.375 DRAM Voltage, IIRC MEM_VTT should have changed automatically to 0.690 right? I've spent many days and nights tweaking this or that mem Kit on my SLI/ac. Those #'s I posted should at least get most Kits to 2666 or better. They are a good starting point anyways to change a Users outlook concerning their mem Kit, processor and motherboard. Again, Thanks for posting that. It's posts as your that keep me doing what I do here.

you need to run prime or any other burntest to confirm its stability

I'm tired of having this visual lag even with this new EVGA 1060 gtx, it take time to load the emulator CEMU 1.81.b i saw others video when people loading their games, it load instant fast, mine is like take 20-30 sec to load...

PC SPECS: 1600 ryzen 5 3.7 voltage 1.3
EVGA GTX 1060 6gb
PSU: ThermatalTake 775 bronze 80
MOBO: asrock ab350 fatality k4 gaming
And i dont know if i made a mistake buying this ram, because in the packet it says designed for intel x99, but my motherboard QVL Tested my ram on 3200.. certfied, but this is killing me, i dont know what to do

There is a visual lag :/ at 60fps or 100fps steady

I have a video in Youtube of cs 1.6 describing my problem, i dont know if this a memory bad timings, or bad voltages, or maybe there some tweaks in bios that i'm missing???



Or maybe my psu is to old... or there is an electricity problem that cause pc performance decrease? i have amd fully update, bios, too, windows 10 pro 64 legal, registry clean, no blotwares etc u.u

This is a video of cs 1.6 game


https://www.youtube.com/watch?v=QZ3atFSq90I

Power Supply I bought in 2011 (right now is the only old thing in my pc)


Power Supply AIDA64 voltages, temps etc




Memory Patriot dual kit 2x4 8gb Oc 3200 pv48g320c6k (Samsung 11D1) IS QVL by my motherboard i check their QVL list, is the same that i have. for some reason they they put in parentheses the (Samsung 11d1)



Edited by x58haze - 10 Jul 2017 at 1:13pm