x470 Taichi, XFR/PBO and CPU voltage offset

Thank you for the forum link, I was going to look for it later today.
Vielen Dank für den Forum-Link, ich würde ihn später heute suchen.

Is this BIOS tested well? Are there any issues I'm likely to encounter if I flash it on my motherboard? Where does it come from?
Ist das BIOS gut getestet? Gibt es Probleme, auf die ich möglicherweise sto?e, wenn ich sie auf meinem Motherboard speichere? Woher kommt das?

Thank you for giving us the heads up, I'll keep an eye out for when it becomes an official update.

I have the same problem. I get wicked performance with -0.075 offset and PBO enabled, my 2700x boosts up to 4.15 GHz on all cores under full load stable. The max core voltage under that full load is 1.444v which is excellent. It still ramps down to .800v when idle, best of both worlds really.

After I restart or boot the computer cold after shutting down the offset setting has gone back to -0.100v which prevents Windows from booting.

I have to go into setup every time I start or restart the computer and set the offset back to -0.075v again and then save and exit to get the computer to boot. It just doesn't hold the setting.

Very frustrating because this is such a good setup if it would just hold the setting.

I imagine a BIOS update will fix it in the future but who knows when that might be...