X370 Gaming K4 - new BIOS with AGESA 1.0.0.6&a |
Post Reply | Page <1 2425262728 30> |
Author | |
oliwer21
Newbie Joined: 04 Sep 2017 Location: Poland Status: Offline Points: 1 |
Post Options
Thanks(0)
|
Ricky
Newbie Joined: 25 Jun 2017 Status: Offline Points: 43 |
Post Options
Thanks(0)
|
3.2 bios release
|
|
EddoWagt
Newbie Joined: 29 Jul 2017 Status: Offline Points: 14 |
Post Options
Thanks(0)
|
Ricky
Newbie Joined: 25 Jun 2017 Status: Offline Points: 43 |
Post Options
Thanks(1)
|
1.Update AGESA to 1.0.0.6b. No memory ABL(AGESA Boot Loader) or training changes.
2.Add setup options to select SMART fan temperature source. Change default to monitor external CPU temperature. PS1. Windows update is available for version P3.00 or later. |
|
Franksssss
Newbie Joined: 22 Jun 2017 Location: Spain Status: Offline Points: 14 |
Post Options
Thanks(0)
|
EddoWagt
Newbie Joined: 29 Jul 2017 Status: Offline Points: 14 |
Post Options
Thanks(0)
|
aleksei12
Newbie Joined: 09 Jun 2017 Status: Offline Points: 12 |
Post Options
Thanks(0)
|
I've updated the BIOS all the last three versions,but nothing is more stable than version 2.40 - no. maybe this is a reason a little to think that after version 2.40 something specifically started to add incorrectly in BIOS as amd and asrock
only at 2.40 my memory is running at 3200 is pretty stable on other versions then a simple test on reading/writing it is not but in version 2.40 there is no setting subtimings
Edited by aleksei12 - 09 Sep 2017 at 2:37pm |
|
Ryzen 1700 3900Mhz,ASRock Fatal1ty X370Gaming K4, (2*8) DDR4 KFA2 HOF 3600 @3200 Mhz 14-14-14-32 ,Palit GTX1070 jetstream,Be Quiet PURE POWER L8 600W
|
|
m@c
Newbie Joined: 26 Aug 2017 Status: Offline Points: 6 |
Post Options
Thanks(0)
|
Longtime Asrock user...
|
|
antonio70
Newbie Joined: 09 Sep 2017 Status: Offline Points: 5 |
Post Options
Thanks(0)
|
Hi,
Ihave this motherboard Asrock X370 Fatal1ty Gaming K4. I have some wied stuff going about overclocking CPU. In bios i set CPU frequency to 3800 and Core Voltage to 1,33V. It's quite stable. But when I load windows in hardware monitor and CPU-Z i have Vcore 1,33-1,36V. This should be also ok. But when i tried overclock through Ryzen Master Utility i can easily get 3900 MHz with just 1,3V and in both hardware monitor and CPU-Z it shows stable 1,3V some times even little lower. I bios I tried also averclocking viac P-states but I can't achieve result like in Ryzen Master. Problem with Ryzen Master is that everytime after reboot i have to apply overclock. Have someone similiar experience like me? @ to AGESA 1.0.0.6.b i can overclock my F4-3000C16D-16GTZR stable from 2400 to 2667. 2800MHz working but deffinitely not stable yet.
|
|
datonyb
Senior Member Joined: 11 Apr 2017 Location: London U.K. Status: Offline Points: 3139 |
Post Options
Thanks(0)
|
if its any help
my settings for 3.9ghz and 1.3 volts in pstates are 9c 8 28 i then go back to advanced tab and manually set cpu volts to AUTO fixed voltage LLC to level 2 in cpuz this maintains highest volts to 1.296-1.306 (upto bios version 3.1 the volts would stay at this ,now with version 3.1 its allowing it to throttle down to 0.600 ish on idle) PLEASE BEAR IN MIND 3.9 GHZ AT 1.3 VOLTS SEEMS TO BE LUCKY not a 100% success on every cpu |
|
[url=https://valid.x86.fr/jpg250][/url]
3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
|
Post Reply | Page <1 2425262728 30> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |