ASRock Fm2A58M-VGA3+ R2.0 Wont Turn on.

So when you press the power button nothing at all happens? Are the LED lights on the LAN port lit? If they are not then there is no power getting to the board. Be sure to check if the clear CMOS jumper is set to "1 and 2" not "2 and 3" if the jumper is set in the "clear" (2 and 3) position the board will not power on. Also make sure that the 24pin power connector is firmly seated and its clip is in place, I have often seen these connections be very tight to the point where it looks like they are in but in fact are not making contact.

If you can't get it to power up at all you should start by checking to make sure all the necessary power connections are properly connected and that the switch on the back of the power supply is on. You can also check to make sure you have connected the power switch to the correct pins on the motherboard, this is one of the more common issues with new builds not powering up. 

Joker wild wrote: This is my first computer build. My Motherboard is ASRock Micro ATX DDR3 2400 FM2 Motherboard FM2A58M-VG3+ R2.0 My cpu is an AMD A6-5400K APU 3.6Ghz Dual-Core Processor AD540KOKHJBOX My power suppluy is a Logisys 480W ATX Power Supply My Ram is Team Elite 4GB (1 x 4GB) DDR3-1333 Memory my video card is a Zotac GeForce GT 730 4GB Video Card. And for the life of me i cannot get the damn thing to turn on! Its frustrating but i cant figure out what i am missing. any help would be greatly appreciated.

Are you getting any post warning beeps?
Is it posting at all?
Do the fans power up?
You push the button and????????????