H110 Pro BTC not showing display

I have two MOBO's with the same issue... No video. Any updates?

puntar wrote: Hi, i registred jut fot this reply. Had the same problem.. found out, that the problem was with the power cable; CPU needs to have 8 pin cable connected from PSU to ATX12V1 connector (CPU is actually printed on the cable). Plugged it in, restarted and now everythig works ok. Hope this helps. B.

OK I use a 4 pin connector and the motherboard doesn't display. So I just have to change the power supply in order to have an atx 8pin connector?

Figured it out. so i moved the risers on the motherboard, the riser with the long black port on the motherboard where you plug in the gpu is a graphic card section was the issue. Remove the riser that is plugged into the long port where the gpu input from the riser and plug it into the any remaining 12 sections. If you plug it into the long port at the gpu slots it wont allow video display cause it is meant for a video card. I turned everything off, i unplugged and relocated into another slot and bang video works..hope this helps. If your using all 13 slot then you would need to reconfigure the slot to reconize the input of the gpu riser and program the video display mainly on the dvi only .

Just got this board from newegg. I spent 3 hours trying to narrow down why it wouldn't post. Straight from the package, no display. Fans all spun but that was it. Was a complete fresh mining build so didn't know what part wasn't working exactly. Turns out it was a dead CMOS battery. Replaced battery and started right up.