RGB Utility issues and workaround |
Post Reply | Page 123 10> |
Author | |||
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24398 |
Post Options
Thanks(5)
Posted: 05 Dec 2018 at 9:49pm |
||
The new 1809 (RS5) Windows 10 release is causing some issues with the RGB utility, on the previous 1803 (RS4) it seems to work fine.
Note, this only applies to boards with Addressable RGB, so: B450; X470; Z370 and Z390 Solution: The cause is the new Windows 10 release, and the use of the Windows powershell to execute some commands. When the utility is installed it extracts a number of files to the C: drive Her is how to solve it 1. Download the latest 1.0.26 utility: http://asrock.pc.cdn.bitgravity.com/Utility/RGB/PolychromeRGB(v1.0.26).zip 2. Uninstall the RGB Led utility and reboot 3. Install the 1.0.26 utility and reboot 4. Start the utility, it will detect the RGB hardware, (it should also install the firmware update, and that is what goes wrong in the latest Windows version, it doesn't update!) 5. Now we have to manually update the firmware via the command prompt 6. Open the Command Prompt (Windows key+r and type in cmd and click okay) 7. Type (or copy/paste);
8. Type DIR, and check for 2 files wicpflashadsb.exe and nu51_2.07 (this is the latest firmware) 9. Type; wICPFLASHADSB.exe /File=FilenameHere example:
10. Press Enter, the firmware for the LED controller will be reflashed 11. Done This is a known issue and a proper fix is in development. For now, you can either hold off on installing/updating the RGB utility and wait for a fix or you can use this workaround to get things working correctly. This info was provided by my contact at ASRock who requested I share it here for you all. Edited by Xaltar - 09 Sep 2019 at 6:05am |
|||
|
|||
Erasmus Venport
Newbie Joined: 14 Dec 2018 Location: UK Status: Offline Points: 1 |
Post Options
Thanks(0)
|
||
Recently attempted this work around on 470 Taichi Ultimate running Windows 10 Pro with mixed results.
Firstly tried the work around as stated, but only got a partial fix, after applying the work around the program loaded but was not working correctly, I had a number of access violations when trying to select options and the program ran very slowly. I re-applied the work around but ran the command prompt as administrator, used the nu51_2.07 file to update and then set PolychromeRGB to run in windows 8 compatibility mode and to run as administrator, this fixed the access violations and the slow running. However this only partially fixed my RBG problems, I still can't change the colour of the outer ring of the Wraith Spire AMD Cooler and can only set RGB colours on one DIMM not both..... Hope this helps others if they are having difficulties. |
|||
Elodin
Newbie Joined: 18 Dec 2018 Status: Offline Points: 1 |
Post Options
Thanks(0)
|
||
wICPFLASH v1.0.18 - ASRock Incorporation, all rights reserved
---------------------------------------------------------------------- Project Name = Z390 Phantom Gaming 4-IB BIOS Version = L0.01 Reading file: nu51_1.10...0...ok. Enter ICP mode. Company ID: 0x000000FF, Device ID: 0x00FF00FF Erasing: EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE Programming: PPPPPPPPPPPPPPPPPPPPPP Verifying: Verify error: address=0x00000000, value: 0x000000FF != 0x00000002 When I reflash I get this error message what does this mean? Is there any way I can figure out what the error message is referring to? |
|||
Bothos
Newbie Joined: 18 Dec 2018 Location: CH Status: Offline Points: 1 |
Post Options
Thanks(0)
|
||
Thanks a lot it helped even with version 1.0.27 and Win 1803.
|
|||
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24398 |
Post Options
Thanks(0)
|
||
Running command prompt as Administrator prevents issues, in cases where the user is not using the operating system with administrative privileges the tool will not have permission to do what it needs to.
To run as administrator: |
|||
|
|||
Jordo Powers
Newbie Joined: 19 Dec 2018 Status: Offline Points: 4 |
Post Options
Thanks(0)
|
||
Is this why I can't get Asrock Fatal1ty b250 k4 won't work with polychrome? Rgb led wont pick up my hyper x predator rgb ram. I have to use Asus aurora
|
|||
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24398 |
Post Options
Thanks(0)
|
||
Effected boards are listed in my original post. This issue doesn't apply to your intel 200 series board
Edited by Xaltar - 19 Dec 2018 at 7:07pm |
|||
|
|||
asp
Newbie Joined: 23 Jan 2019 Status: Offline Points: 28 |
Post Options
Thanks(0)
|
||
Everything was working fine then one day one of my HyperX Predator RGB strips started glitching, I was afraid it was damaged so soon!
I found this thread and tried the reflash, but that didn't change anything. Then I used the Polychrome app to turn all LED sets to OFF, and then uninstalled the Polychrome app. Now here is the best part of this story! I shutdown the PC (yes I have fastboot enabled, oh well, nobody is perfect), turned off the PSU, waited a few seconds, then powered up and this is when the magic begins! Now for some reason Windows booted with all of my LED sets turned back on the way I had them set a few days ago, except with one amazing difference that I will now reveal with great pride! The 2 HyperX Predator RGB strips are doing the factory default rainbow routine, oh but can you imagine, they are NOT in sync, at least not most of the time, after some minutes they aling again, but then one is clearly not interested in such a slow rainbow effect, so it goes right on ahead at its own speed and they go out of sync again. The effect has resulted in my amazing ASRock Fatal1ty system to be truly godly and unmatched in this world. Thanks for reading and have a great day! |
|||
asp
Newbie Joined: 23 Jan 2019 Status: Offline Points: 28 |
Post Options
Thanks(0)
|
||
...and its gone.
My original glitching and failing of one of my DDR sticks was cured by simply reflashing the motherboard BIOS. |
|||
charlesp4
Newbie Joined: 12 Mar 2019 Status: Offline Points: 1 |
Post Options
Thanks(0)
|
||
I tried this work around, launched the app and still cannot change colors. Everything in the app looks like it changes, however when I click apply nothing happens.
|
|||
Post Reply | Page 123 10> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |