RGB Utility issues and workaround |
Post Reply | Page <12345 10> |
Author | |
AndyD
Newbie Joined: 18 Mar 2019 Location: FL Status: Offline Points: 8 |
Post Options
Thanks(0)
|
I was sent the workaround and it did not work. I guess I will wait for the fix update. Other than the rgb issue everything works great.
|
|
AndyD
Newbie Joined: 18 Mar 2019 Location: FL Status: Offline Points: 8 |
Post Options
Thanks(1)
|
The orginal post starts back in december of 2018. We are now 4 months down the road. Any idea when we may see a fix?
|
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Online Points: 24578 |
Post Options
Thanks(1)
|
I will check with ASRock again on the matter. From what I have gleaned from various sources it would appear that an issue was discovered in the base application (used by more than one manufacturer). I suspect that this has impeded a proper fix from being released. In situations like this the base code needs to be corrected by the 3rd party before it can then be adapted by manufacturers. In other words, I am not sure where the holdup is. The issue doesn't appear to effect everyone using the software or we would see a lot more comments in this thread.
I'll get back to you all as soon as I have word from my contacts. My X399 Phantom Gaming 6, Z270 Gaming K6 and X370 Taichi are all working fine with regards to the RGB software so I have been unable to reproduce the issues on my own systems. |
|
|
|
AndyD
Newbie Joined: 18 Mar 2019 Location: FL Status: Offline Points: 8 |
Post Options
Thanks(0)
|
I am on a fresh build. Asrock B450m/pro With AMD Ryzen 3 2200 16gb ram and a 750ti MSI GPU. I did a fresh download of the most current Windows OS. Which is apparently where the prob;em lies. It will not recognize the RGB ram or the fans. I will probably just use a separate controller. And wait for the fix for the RGB ram.
|
|
tjgodin
Newbie Joined: 11 Apr 2019 Status: Offline Points: 3 |
Post Options
Thanks(0)
|
I'm also having the issue with the ASRock Phantom Gaming ITX/ac board and the RGB Utility. The app still doesn't work within Windows 10 (latest version) and this is also after flashing the controller successfully, per the instructions.
As captured in the Windows Logs... Faulting application name: AsrPolychromeRGB.exe, version: 1.0.34.0, time stamp: 0x00000000 Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000 Exception code: 0xc0000005 Fault offset: 0xb4d4c8cc Faulting process id: 0x243c Faulting application start time: 0x01d4f45adbd22141 Faulting application path: C:\Program Files (x86)\ASRock Utility\ASRRGBLED\Bin\AsrPolychromeRGB.exe Faulting module path: unknown |
|
tjgodin
Newbie Joined: 11 Apr 2019 Status: Offline Points: 3 |
Post Options
Thanks(1)
|
ASRock Mod,
Any update on when we can anticipate an application/firmware update? It remains unusable as is, for my configuration with the Z390 Phantom Gaming ITC/ac board and the two addressable LED T-Force Delta RGB drives I have installed. What I've been able to determine on my own is that the app conflicts with any other LED management app... such as Corsair's iCUE (which doesn't compete or manage ASRock addressable RGB at all). Provided that app is closed and not active, the ASRRGBLED app seems to open without issue. If not, it errors out, as previously posted. That said, when I go to log out of windows and shutdown, the ASRRGBLED app seems to hold and not want to close. Let us know - thanks! Tony |
|
onethirtyeight
Newbie Joined: 10 Jul 2019 Location: Los Angeles, CA Status: Offline Points: 3 |
Post Options
Thanks(0)
|
I tried the steps above.
I get an error. Says FAIL in big ascii art with the error CMD_RPG_HIGH_LOW data does not match I have a Taichi x470 and I really would like to change the colors on my board. My system is lit up blue and the lights are stuck on red and white. Honestly I regret buying this board seeing how long it takes for issues to be addressed. I was told to buy Asus but instead I did my own research and found this mobo to be the best feature-set for my dollar. Didn't realize the software was such crap. Maybe I should have just bought Asus. |
|
onethirtyeight
Newbie Joined: 10 Jul 2019 Location: Los Angeles, CA Status: Offline Points: 3 |
Post Options
Thanks(0)
|
Just tried to flash with the older version... which completes successfully. I figured maybe then I could update again--- still failure.
Starting the program only gives me memory errors. I followed the instructions exactly and ran my command prompt as administrator. Restarted after uninstall. Restarted after install. Opepened the program --- got errors. Closed the program and did the command prompt firmware update--- failed. |
|
onethirtyeight
Newbie Joined: 10 Jul 2019 Location: Los Angeles, CA Status: Offline Points: 3 |
Post Options
Thanks(0)
|
I heard others had success using wICPFLASH instead of wICPFLASHADSB so I gave that a try. Same result unfortunately.
I also turned off all RGB software (iCue, Phillips Hue, etc) before each step. |
|
anjilikawalson
Newbie Joined: 20 Jul 2019 Status: Offline Points: -1 |
Post Options
Thanks(0)
|
Thank you for posting the solution of it, as I had been looking for to solve this issue. However, if you want to recover your Forgot AOL Password[URL=http://www.aolhelp247.com/aol-forgot-password/]http://www.aolhelp247.com/aol-forgot-password/[/URL] you can cordially welcome 24*7 for any sort of tech support.
|
|
Get an instant support for your AOL mail technical issues. The best possible way to contact us is through AOL Tech Support Number +1 (800) 848-5295.
|
|
Post Reply | Page <12345 10> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |