AMD Ryzen 3600x with Fatal1ty X470 Gaming-ITX/ac

Tyesov wrote: Hi Guys, same problem here. Recently I have purchased asrock b450-i miniITX board and ryzen 3600. My set up is: Asrock B450 miniITX board Ryzen 3600 M2 SSD + HDD installed 1060 3gb 700w Zalman Corsair Vengeance 3600 Mhz All parts installed properly (not the first time assembling). When I try to start the system it starts, fans are working, 20 seconds approximately and then it reboots for another cycle. Monitor is connected but no signal. My first idea was that is because memory or something else until I found this topic. So, myain question is anybody solve this issue? I assume that the BIOS has to be updated with ryzen 1 or 2 installed. Comments are highly appreciated!

From what I've discovered going through essentially the same config is that the board must be version 3.30 or higher in order to post with the 3600X. I had to buy a 200GE as a boot processor to be able to update to 1.70 first, then I went to the beta 3.33 BIOS I got from support. After that, I swapped in my 3600X, it took maybe 30 seconds but then came up fine. It is able to see my 3200Mhz RAM (auto-clocks to 2400 but is fine after I set manually to 3200), also sees my m.2 NVME drive. I installed windows and all drivers and seems perfectly stable, and I think, performance is as expected. Did some 4k gaming last night for a couple hours.

If you want to skip going through support for the BIOS you can DM me and I can send you the link, I've just heard some reports of instability and don't want to compromise anyone without them being aware of some risk.

I have found 3.30 Bios, which supports new ryzen. I wonder it is better to update on this or ob beta 3.33? Could you be so kind to suggest which one install ?

Ray62 wrote: Bios 3.30 has the AGESA Combo-AM4 1.0.0.1 BetaBIOS 3.33 has the AGESA Combo-AM4 1.0.0.3.AB https://shop.jzelectronic.de A shop with Asrock products and support. Here you can find the bios files for the Asrock boards, also the beta 3.33 BIOS for B450 miniITX.

These beta BIOS are stable or still with problems?

I got B450 gaming k4 BSOD all the time with 3.30. beta BIOS 3.32 fixes this?

Seems you guys are lucky, My Killer X370 is running my 3700x like absolute garbage.

I can't get it to post with more then two sticks of memory, I can't get it to run the memory any faster the 2133 or it becomes unstable.

So with L3.41 bios (AGESA Combo-AM4 1.0.0.3.AB ) its starts sometimes, if it passes through bios then its stable, so I just keep it running the whole time. I think issues is with memory support I notice that settings cl etc float after each reboot