Update BIOS Taichi x470 |
Post Reply | Page <123> |
Author | |
butchboy
Newbie Joined: 17 Jul 2019 Status: Offline Points: 48 |
Post Options
Thanks(0)
|
Just popped my system together.
MB: Taichi x470 Bios: v3.50 CPU: Ryzen 3700x Memory: 2x Gskill F4-3200C16D-16GTZR PSU: Corsair RMX 750 GPU: EVGA FTW GTX 1080 AIO: Corsair H115i Platinum Case: Lian Li PC-011 Dynamic SSD: Samsung EVO 500GB HD: 2x WD Blue 4TB Fans: 3x InWin Sirius Loop RGB 120mm Everything went well until I tried to update "AMD ALL in 1 with VGA driver" from the Asrock App Shop. It totally borked my system. Couldn't even get into Windows with geting a BSOD. Even reinstalling Win 10 didn't fix it. I had to restore my SSD with a drive image to fix it. Other than that, all is stable. However, I have my memory set really low at 2132 MHz. Just testing stability and board functions. Haven't tried using XMP yet, let alone severe overclocking or stressing. Temps look good... about 34 or 35 at idle. I will start pushing my system in the coming days. |
|
gizmic
Groupie Joined: 13 Jun 2018 Location: Hong Kong Status: Offline Points: 677 |
Post Options
Thanks(0)
|
sept enough time to put coins in the piggy bank
i dont mind graphics pcie4 but i'm interested if the m.2 gets it i will migrate if sammy ever releases one btw cx5 from 3200 1.20 bios i'm now on 3533 3.32 bios the struggle is real lol |
|
|
|
cx5
Senior Member Joined: 15 Sep 2017 Location: Hong Kong Status: Offline Points: 2383 |
Post Options
Thanks(0)
|
3950xxxxxxxxxxxxxxxx what arrival date? I will visit here again to see your happiness :) and I suppose x470 official get support pcie-4???? I forgot. I think it is. |
|
x370taichi@3.50gen4
AX750 Optane900P SN770 3800x PosdonZro4 BarrowPWM-17w>420x140x28 XFX SWFT319 6900XT MSI RX560 LP to get Fluid Motion BlueskyFRC 75hz |
|
gizmic
Groupie Joined: 13 Jun 2018 Location: Hong Kong Status: Offline Points: 677 |
Post Options
Thanks(0)
|
keep us updated i'm waiting for 3950X
|
|
|
|
butchboy
Newbie Joined: 17 Jul 2019 Status: Offline Points: 48 |
Post Options
Thanks(0)
|
Finally got all my hardware. Using a Athlon 200GE, I had no problems updating the bios to 3.43 and it booted right up. Haven't tested the stability or dimm speed yet, but so far so good.
|
|
butchboy
Newbie Joined: 17 Jul 2019 Status: Offline Points: 48 |
Post Options
Thanks(0)
|
Oh so close! Just received my board from Newegg with version 3.20 on it. Have a Athlon 200GE on the way. Hopefully, by the time I put this together V3.46 will be available.
|
|
dgtlntt
Newbie Joined: 17 Jul 2019 Status: Offline Points: 3 |
Post Options
Thanks(0)
|
I had no such luck Board came in yesterday it has a small sticker over a bios chip saying 1.10 and so was the bios version As i live in Eastern Europe i expected as much |
|
butchboy
Newbie Joined: 17 Jul 2019 Status: Offline Points: 48 |
Post Options
Thanks(0)
|
I'm curious to know when you received your board and what BIOS version it came with. I am due to receive my board tomorrow. I am hoping to win the BIOS lottery and have v3.43 already installed.
|
|
dgtlntt
Newbie Joined: 17 Jul 2019 Status: Offline Points: 3 |
Post Options
Thanks(0)
|
It is done!
i managed to come by a R3 2200G and with it installed all bioses showed up and 3.43 installed without a hitch. after that i popped in my R5 3600X and after a few cicles it started normaly and i am now installing drivers in windows as i am typing this in separate window. you don't need all that driver install nonsense from AsRock Bios page if you are doing a clean install anyway, that is only needed if you are upgrading CPU only on already existing system. But if you are upgrading it is better to start from scratch anyway. so for anybody that went with taichi X470 for their Ryzen 3000 build the conclusion is this: YOU NEED RYZEN CPU to update to latest BIOS! AT LEAST "R3 1200"! older CPUs are losing compatibility. The board wont let you select a bios version if currently installed CPU is not in newer version compatibility list. (kinda nice trick actually) That is all :) |
|
gizmic
Groupie Joined: 13 Jun 2018 Location: Hong Kong Status: Offline Points: 677 |
Post Options
Thanks(0)
|
give 3.46 a try
|
|
|
|
Post Reply | Page <123> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |