![]() |
x370 Killer SLI/AC memory issues. |
Post Reply ![]() |
Page 12> |
Author | |
Vantharas ![]() Newbie ![]() ![]() Joined: 13 May 2017 Location: SC , USA Status: Offline Points: 19 |
![]() ![]() ![]() ![]() ![]() Posted: 20 Jul 2019 at 3:09pm |
Hi guys,
I've upgraded the bios on my board in preparations for my 3700x coming in. However now that I have updated the bios to P5.40. ( following the steps listed on the page to get to said bios version ) The board will now only post with 1 stick of memory. It doesn't matter what I do, I've seated and re-seated the memory. I've cleared the cmos while the memory was sat. I've done everything I can think of. However this board simply will not post with more then 1 memory stick in it now. It doesn't care where the memory is seated either. It doesn't care which of my sticks I use. Its simply telling me to take a hike now. Previously before updating the bios , this wasn't an issue, It would post no problem. Is Asrock aware of the issue with there broken code? I've also for science and giggles reinstalled the bios, and of course tested the memory in my other boards. Really looking for some help here. |
|
Corsair AX860, Nvidia GTX 1060 6GB , Asrock X370 Killer SLI/ac , Ryzen 5 1600X, 16GB DDR 4 3200
|
|
![]() |
|
Ray62 ![]() Groupie ![]() ![]() Joined: 01 Jul 2018 Location: Germany, Berlin Status: Offline Points: 706 |
![]() ![]() ![]() ![]() ![]() |
Didn't you read what is going wrong with the current bios versions for the new Gen3 Ryzens?
5.40 with AGESA Combo-AM4 1.0.0.1 has reduced functionality and bugs. Newer Combo-AM4 1.0.0.3(AB) solve some problems. Try to load XMP Profile, save, check if it is running and put in the second stick. Maybe the new 3700X will behave better as the old 1600X. |
|
Asrock Fatal1ty X370 Professional Gaming Offline
Under test: MSI X570_MEG_ACE | AMD Ryzen 9 3900X | Scythe Mugen5 | 2x16GB F4-3200C14D-32GTZ@3466 | ASUS GeForce GTX 1080 Ti FE |
|
![]() |
|
Vantharas ![]() Newbie ![]() ![]() Joined: 13 May 2017 Location: SC , USA Status: Offline Points: 19 |
![]() ![]() ![]() ![]() ![]() |
Well I checked the forum and I didn't see a sticky post anywhere that said "known issues"
|
|
Corsair AX860, Nvidia GTX 1060 6GB , Asrock X370 Killer SLI/ac , Ryzen 5 1600X, 16GB DDR 4 3200
|
|
![]() |
|
Ray62 ![]() Groupie ![]() ![]() Joined: 01 Jul 2018 Location: Germany, Berlin Status: Offline Points: 706 |
![]() ![]() ![]() ![]() ![]() |
I mean the infos and forums in the net! There is no board from any vendor which has a bios without problems related to the new Zen2 this time. They all are depending on the AMD AGESA updates, which are still beta. Beginning with ComboAM4 1.0.0.3(ab) the situation is a bit better, but there will be more updates in the next weeks. https://www.overclock.net https://www.techpowerup.com Just for example. German site, but a good and regulary updated thread for an overview of the bios versions for mostly all boards: https://www.hardwareluxx.de/community/f12/ultimative-am4-uefi-bios-agesa-ubersicht-19-07-19-a-1228903.html |
|
Asrock Fatal1ty X370 Professional Gaming Offline
Under test: MSI X570_MEG_ACE | AMD Ryzen 9 3900X | Scythe Mugen5 | 2x16GB F4-3200C14D-32GTZ@3466 | ASUS GeForce GTX 1080 Ti FE |
|
![]() |
|
Vantharas ![]() Newbie ![]() ![]() Joined: 13 May 2017 Location: SC , USA Status: Offline Points: 19 |
![]() ![]() ![]() ![]() ![]() |
Well I have installed my 3700X same issues. Still only post with 1 stick of memory, still only runs said memory at 2133. If I clock it any higher it'll hardlock after a while.
I'm really really annoyed right now. This is the worst upgrade I've ever experienced in my life. My Old 990FX MSI board was on point when I upgraded the bios. Dropped in the new chip everything was fine. Asrock though seemingly an entirely different beast. |
|
Corsair AX860, Nvidia GTX 1060 6GB , Asrock X370 Killer SLI/ac , Ryzen 5 1600X, 16GB DDR 4 3200
|
|
![]() |
|
Ray62 ![]() Groupie ![]() ![]() Joined: 01 Jul 2018 Location: Germany, Berlin Status: Offline Points: 706 |
![]() ![]() ![]() ![]() ![]() |
That's why i'm keeping my old Ryzen 7 1800X with an old bios.
I need a stable running system. Beta testing R3000 only with a different new system in parallel placed naked (without case) on the desk, but i have not so much time doing so. |
|
Asrock Fatal1ty X370 Professional Gaming Offline
Under test: MSI X570_MEG_ACE | AMD Ryzen 9 3900X | Scythe Mugen5 | 2x16GB F4-3200C14D-32GTZ@3466 | ASUS GeForce GTX 1080 Ti FE |
|
![]() |
|
Vantharas ![]() Newbie ![]() ![]() Joined: 13 May 2017 Location: SC , USA Status: Offline Points: 19 |
![]() ![]() ![]() ![]() ![]() |
So my friend who has a X370 Taichi is also experiencing the same issue, although his is not as bad as mine, his will at least post and boot. And it'll run just fine at 2133mhz. If he turns it up anyhigher. No post no boot. Same as mine. Asrock lets go , where are the updates, Please make our boards usable.
|
|
Corsair AX860, Nvidia GTX 1060 6GB , Asrock X370 Killer SLI/ac , Ryzen 5 1600X, 16GB DDR 4 3200
|
|
![]() |
|
Ray62 ![]() Groupie ![]() ![]() Joined: 01 Jul 2018 Location: Germany, Berlin Status: Offline Points: 706 |
![]() ![]() ![]() ![]() ![]() |
The X370 Taichi is a very popular board with more beta bios versions available. In the "Asrock X370 Taichi Overclocking Thread" @www.overclock.net a lot of (experienced) users are playing around with 3000 Ryzens and RAM OC.
2133mhz with only one stick: That can be avoided, even with the X370 Killer SLI/ac, i guess. But simply loading the XMP profile will be succesfull only in a few cases (independent to any board/bios version). You have to improve your understanding for setting up the bios for Ryzen and the used memory, even if the bios versions will offer better behavior in the (hopefully) near future. Anyway, the current beta state, particularly for the X370 boards, is a bad situation. |
|
Asrock Fatal1ty X370 Professional Gaming Offline
Under test: MSI X570_MEG_ACE | AMD Ryzen 9 3900X | Scythe Mugen5 | 2x16GB F4-3200C14D-32GTZ@3466 | ASUS GeForce GTX 1080 Ti FE |
|
![]() |
|
gizmic ![]() Groupie ![]() ![]() Joined: 13 Jun 2018 Location: Hong Kong Status: Offline Points: 677 |
![]() ![]() ![]() ![]() ![]() |
learn to input it manually
i cannot boot 16-18-18-38 @ 3200 which is a common ryzen timing but i'm currently on 3533 CL 14 |
|
![]() |
|
![]() |
|
sybreeder ![]() Newbie ![]() Joined: 09 Jul 2019 Status: Offline Points: 8 |
![]() ![]() ![]() ![]() ![]() |
I had issues with 5.40 and ryzen 1600. Xpm didn't worked at all.
I was able to go back to 5.30 and XMP works fine but it's not compatible with ryzen 3000 |
|
![]() |
Post Reply ![]() |
Page 12> |
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |