![]() |
Ryzen 3000 series support |
Post Reply ![]() |
Page <1234 108> |
Author | |
apocalypseCow ![]() Newbie ![]() Joined: 18 Feb 2021 Status: Offline Points: 13 |
![]() ![]() ![]() ![]() ![]() |
I have an x570 Taichi and am attempting to use some external risers to power some extra GPUs. The PCI-E GEN 4.0 speeds are not supported by the risers, so I need to lower all of the PCI-E socket speeds to 3.0 or less.
I have tested on BIOS 3.8 and 4.0, and am UNABLE to change the speed of the BOTTOM PCI-E slot (PCIE5) which I know is controlled by the x570 Chipset. The BIOS has several options under the ADVANCED -> AMD PBS Menu related to this: PCIe x16 Bus Interface PCIe x8 Bus Interface Chipset Bus Interface I tested by plugging an NVIDIA 3090/3080 into ALL of the slots simultaneously. The TOP GPU slot was changed by the BIOS option x16 bus interface. Makes sense, (GEN1-4) all reported correctly in GPU-Z after the change. The MIDDLE GPU slot was changed by the BIOS option 'x8 bus interface'. Also makes sense. Worked as expected. The BOTTOM GPU slot (PCIE5 on the mobo) NEVER CHANGED despite every setting attempt I tried. I assumed the "Chipset Bus Interface" would control this slot, but switching it between GEN1-GEN4 had no affect. The slot always reported as PCI-E GEN 4.0 in GPU-Z after testing. The other settings mentioned above also had NO AFFECT on the BOTTOM GPU slot. At the moment this is limiting my ability to connect additional GPU's to my x570 board as the the bottom GPU SLOT (AND all x1 slots) seem STUCK on GEN 4.0 PCIE. Is the BIOS broken? I assumed "Chipset Bus Interface" would be the right setting I needed to change, but it did not work. Did this ever work in older versions? I've only tried BIOS 3.8 and 4.0. Is there a control that can be added for this? Can anyone from ASRock please help here? Thanks very much for your time. BIOS Settings Page when selection a Bus Interface: ![]() Setting them all to GEN1 shows the problem clearly: ![]() WHILE running a program on all cards to ensure full load, checking PCIE gen speeds via GPU-Z shows that the 3080 (in BOTTOM GPU SLOT, PCIE5) is locked at PCIE gen 4.0. No combination of settings could change this, I tried them all. ![]() |
|
![]() |
|
IsacVries ![]() Newbie ![]() Joined: 16 Feb 2021 Status: Offline Points: 1 |
![]() ![]() ![]() ![]() ![]() |
Hi....all core boost doesn't give off an impression of being broken. I can control the all center lift with voltage and temperature. Essentially bringing down the central processor temperature can build all-center lift. Once more, we are not discussing all-center lift. This string is talking about the Ryzen 3000 Boost Issue which doesn't include all-center lift. Frankly, it is baffling to have a discussion about single center lift in accordance with the subject when you keep raise all center lift. It isn't on subject and not pertinent to the current issue.
|
|
![]() |
|
abralex ![]() Newbie ![]() Joined: 31 Dec 2020 Status: Offline Points: 2 |
![]() ![]() ![]() ![]() ![]() |
or may be 4S...
|
|
![]() |
|
abralex ![]() Newbie ![]() Joined: 31 Dec 2020 Status: Offline Points: 2 |
![]() ![]() ![]() ![]() ![]() |
Hi there.
do anybody know about supporting "rysen 3350g pro" chip and PRO functionality on "X570 Phantom Gaming 4"? |
|
![]() |
|
Dizo ![]() Newbie ![]() Joined: 28 Dec 2020 Status: Offline Points: 2 |
![]() ![]() ![]() ![]() ![]() |
Board model: X570 Extreme 4
BIOS version: 3.50 (Combo-AM4 V2 1.1.0.0 patch D.) & 3.31 (ComboAM4v2 1.1.0.0 Patch C) CPU: Ryzen 5 3600 RAM: 2x16GB (BLS16G4D32AESB.M16FE) UEFI update from 2.80 to 3.50 resulted in system continual random power downs within minutes of each other. Troubleshooting: I cut power to the mainboard and placed a jumper on the clear cmos jumper then loaded bios defaults. Set my XMP profile to what it was on 2.80 (which ran fine for many months without issue) however system continued to randomly power off / restart. Next, I downgraded to 3.31, performed all the same steps, however system was still not stable and same results. I reverted back to 2.80, set all settings consistent with 3.50 and 3.31 and no longer experience issues with random power downs and reboots. I would like to upgrade this board to utilize Ryzen 5000 processors while I have a 3600 installed (as believe this is the only way you can do it). Why are the UEFI updates causing such instability with my board when the settings / hardware are not changing between UEFI updates? |
|
![]() |
|
BrettC ![]() Newbie ![]() Joined: 22 Nov 2020 Status: Offline Points: 1 |
![]() ![]() ![]() ![]() ![]() |
I bought a 3800x today and I get boot looping and no activity on my monitors.
any help would be awesome. CPU: Ryzen 3800X MB: ASrock AB350 PRO 4 MEM: Corsair Vengeance PRO. The New memory Will run with my old CPU (1600X) GPU: Gtx 1070ti SC PS: evga 650 watt gold + Power supply |
|
![]() |
|
DeeDeeRanged ![]() Newbie ![]() ![]() Joined: 27 Oct 2020 Location: NL Status: Offline Points: 1 |
![]() ![]() ![]() ![]() ![]() |
Found it here https://asrock.com/MB/AMD/X470%20Master%20SLIac/index.asp#BIOS and it looks like the BIOS is the same as the x470 Master SLI. Cheers |
|
Retired IT Specialist
|
|
![]() |
|
johan ![]() Newbie ![]() Joined: 23 Oct 2020 Status: Offline Points: 3 |
![]() ![]() ![]() ![]() ![]() |
Thanks bro |
|
![]() |
|
A Computer Guy ![]() Newbie ![]() Joined: 25 Nov 2019 Status: Offline Points: 10 |
![]() ![]() ![]() ![]() ![]() |
I'm using it on the x470 Master SLI/ac (that's nearly identical) with 3950x and it seems fine but some memory options are missing so if you tweak your RAM some options might not be available. I'd stick to P3.70 with "Update AMD AGESA Combo-AM4 1.0.0.4 Patch B" if you need those memory OC options with the Zen2 CPU. With P4.20 you can flashback to P3.70 if needed. The UEFI/BIOS is much better in P3.70. If you do up your BIOS version install the updated chipset drivers from AMD first before you flash and make sure your running at least Windows 10 ver1909.
I had a lengthy newegg review with instructions how I updated hassle free but it is not listed anymore. I copied my instructions below and updated them from when I was running a 3800x. The 3800x did just fine with air cooling so 3700x should be no problem but for 3950x you really should get the EK monoblock or heat can be a problem with the VRM's. Upgrading to AMD Ryzen 7 3800X 8-Core (16 thread) 3.9 GHz (4.5 GHz Max Boost) - Before swapping CPU: - Reset to BIOS defaults, save, reboot - If you have a BIOS/UEFI older than P1.90 update to P1.90 first! - Be sure to update to BIOS/UEFI version P3.70 (minimum). - Install new AMD chipset drivers and update Ryzen Master - Swap CPU - After swapping CPU: - It is normal to have to wait some time for the motherboard to detect the new processor and readjust before posting. (potentially multiple reboots) - Reset to BIOS to defaults again, save, reboot - Do not use any pre-saved BIOS/UEFI profiles with your older processor. Save over top any existing profiles you had to avoid loading any incompatible settings you had with your prior processor. - Do not panic when you see the voltages after your new 3000 series CPU is installed. Google "the_final_word_on_idle_voltages_for_3rd_gen_ryzen" and read the article there to understand what is happening. It is normal and related to core boosting behavior. Hope this helps. I think the master is EOL now, I'd start grabbing a copy of the BIOS from the site in case the page is taken down. The Master SLI/ac page is no longer available. |
|
![]() |
|
johan ![]() Newbie ![]() Joined: 23 Oct 2020 Status: Offline Points: 3 |
![]() ![]() ![]() ![]() ![]() |
Is the latest BIOS 4.20 stable on a x470Master to run a 3700x? i am running a 2700x right now, using the version 1.9 without any issues OVerclocked and with super low memory timings on my C14 Smasumg B die kit
|
|
![]() |
Post Reply ![]() |
Page <1234 108> |
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |