X570 Taichi: Thunderb 3 OK, but USB-C causes BSoD |
Post Reply | Page 123> |
Author | |
magentosh
Newbie Joined: 29 May 2020 Status: Offline Points: 1 |
Post Options
Thanks(0)
Posted: 29 May 2020 at 2:33am |
Ha, I stumbled upon you in Reddit and now ASRock forums.
Did you get your X570 Creator working for TB2? I have an Apollo Twin and am migrating of mac, like a lot of people. X570 Creator appears to be the preferred config. Thanks |
|
ThreeDee
Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396 |
Post Options
Thanks(0)
|
To OP .. have you tried updating to latest greatest BIOS and see if that helps with USB-C BSOD's?
|
|
|Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15|
|
|
DicusBarbavici
Newbie Joined: 01 Apr 2020 Status: Offline Points: 5 |
Post Options
Thanks(0)
|
What change did you make that got it working? Any advice.
I am trying to get Focusrite Clarett working on x570 Creator and after two days no luck so far. |
|
justme
Newbie Joined: 17 Dec 2019 Status: Offline Points: 5 |
Post Options
Thanks(0)
|
Update 2: I got everything working. I have a ground loop somewhere but not too worried about that, should be able to solve it.
AMD Ryzen 5 3600 ASRock x570 Taichi Gigabyte Titan Ridge Thunderbolt Add-in Card Universal Audio Apollo Twin Pretty happy. Thanks everyone for posting on this forum. Ryzentosh, you were a huge help. |
|
justme
Newbie Joined: 17 Dec 2019 Status: Offline Points: 5 |
Post Options
Thanks(0)
|
Update: I got the x570 Taichi and the Gigabyte Titan Ridge Card. My Apollo Twin status is connected which is awesome. So the Thunderbolt is working. However the UAD Software does not see my Apollo even though my computer does. The UAD Console reads "No Device Connected" even though the Thunderbolt Control Center reads the Apollo Twin as "Status: Connected"
Updated BIOS Updated UAD Software Updated Apollo Twin Firmware and Drivers Updated Titan Ridge Drivers Any suggestions would be much appreciated. My thoughts are, I am doing something that just isn't supported. I know there are other producer / PC builders on this forum so just curious what you all have found. |
|
justme
Newbie Joined: 17 Dec 2019 Status: Offline Points: 5 |
Post Options
Thanks(0)
|
Hey, thank you so much. It looks like the Taichi is the best bet then. Honestly whichever one is going to be easiest for me to get working.
I also have the Adata 8200 pro, so that is nice to know that issue is fixed. Keep me posted if you have any other ideas or how your build goes. I really appreciate it. |
|
Ryzentosh
Newbie Joined: 10 Aug 2019 Status: Offline Points: 15 |
Post Options
Thanks(0)
|
I'll try and answer later when I have more time, but I would recommend getting a board that specifically lists it as supporting TB3 on their website like the higher end boards. Also, checking that it has enough expansion slots. My Pro4 doesn't have quite as many slots as the taichi or perhaps even the Extreme 4, so double check that.
I also haven't been able to get it to boot directly into MacOS without booting into Windows first. But I haven't tried again since the newer bios versions have come out. So it may work now. I know I updated to the latest beta bios, the one just prior to this latest official release and now both of my NVME drives appear in the list simultaneously whereas before they wouldn't. So that was nice to see. (Adata 8200 pro and Inland Premium, both 1tb nvme drives). Also, I got an Apollo Arrow and it doesn't work at all last I tested it with the old bios. But next on the list is to try again with everything on the new bios. Not soon probably though as I lack time. Good luck. |
|
Ryzentosh
|
|
justme
Newbie Joined: 17 Dec 2019 Status: Offline Points: 5 |
Post Options
Thanks(0)
|
Just wanted to also say I was really trying to weigh the differences between the ASRock X570 EXTREME4, Taichi and anything else you all may suggest.
|
|
justme
Newbie Joined: 17 Dec 2019 Status: Offline Points: 5 |
Post Options
Thanks(0)
|
I am in the process of building a ryzen 3600 and was looking at the different mobos that would support TB3 (Apollo Twin). Seems like a lot of people here have experience getting everything working. Thank you for posting all your issues and responses, as it has been fun to learn from you all.
I was looking at the Taichi 570x + the AIC but I am open to suggestions. Does anyone have any tips or suggestions for me before I order everything? Also curious if the Taichi 570x will support TB3 through the Type C formfactor? |
|
L3V1A7H0N
Newbie Joined: 23 Nov 2019 Status: Offline Points: 1 |
Post Options
Thanks(0)
|
https://photos.app.goo.gl/kDK9v73VXG2aKQAeA
It's under Advanced -> CPU Settings -> AMD PBS And scroll WAAAAAYYYY to the bottom. Took me forever to find it. Just plugged in my brand new Apollo Twin X and it came right up. I'm also on the latest 2.50 bios update. Taichi 570x and ryzen 3900x. I'm using the Asrock Thunderbolt 3 AIC. Good luck to anyone trying to get this to work. Took me a bit! |
|
Post Reply | Page 123> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |