x470 pcie lane issues with matisse |
Post Reply |
Author | |
polpo
Newbie Joined: 08 Nov 2019 Location: Finland Status: Offline Points: 4 |
Post Options
Thanks(0)
Posted: 08 Nov 2019 at 4:26pm |
Hello. I am facing some problems with pcie lanes in my current Taichi ultimate x470 build.
Specs here: - Taichi ultimate X470 (with BIOS P3.30) - Ryzen 3900X 12-core 24-thread - Nvidia MSI GeForce GT 1030 2GB LP (PCI-e 3.0 x16) - Dell Perc H310 in IT-mode (PCI-e 2.0 x8) I started my build with some earlier BIOS version and Ryzen 1700, and updated the BIOS to P3.30 by following the instructions. Then I upgraded the CPU to the Ryzen 3900x and the system was working. The GPU was installed on the PCIE1 slot and it was working. Then I added H310 card to the PCIE3 slot and I couldn't get image to the screen from the GPU at PCIE1. I read about the pcie-lanes on this motherboard and I realized it has some auto feature which turns PCIE3 and PCIE1 to x8 mode if there is card in both of these slots. But as far as I am aware the GPU should be working even if it's 8x lanes. I tested the GPU by putting it into the PCIE5 slot (which has x4 slots) and it worked without problems. In the last test I set the GPU alone in the PCIE3 slot and got no image. Could this be something related to the BIOS or faulty pci-e lane? Or am I just missing something? Greetings Polpo |
|
Ray62
Groupie Joined: 01 Jul 2018 Location: Germany, Berlin Status: Offline Points: 706 |
Post Options
Thanks(0)
|
You have to switch the two PCIe slots in 2x8 mode in the bios, i think.
Should be under Advanved\AMD PBS\PCIe x16/2x8 Switch |
|
Asrock Fatal1ty X370 Professional Gaming Offline
Under test: MSI X570_MEG_ACE | AMD Ryzen 9 3900X | Scythe Mugen5 | 2x16GB F4-3200C14D-32GTZ@3466 | ASUS GeForce GTX 1080 Ti FE |
|
polpo
Newbie Joined: 08 Nov 2019 Location: Finland Status: Offline Points: 4 |
Post Options
Thanks(0)
|
Problem solved with the help of comment above.
Some notes what happened: - I switched to 2x8 mode and booted with 2 pcie cards attached. It cleared bios settings for some reason and could not get image to screen. - Switched again to 2x8 mode and set some of the other settings at the Advanced\AMD PBS\ to auto and it started working. Thanks! |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |