![]() |
ASRock Phantom Gaming X RX590 |
Post Reply ![]() |
Author | |
kemal3131 ![]() Newbie ![]() ![]() Joined: 14 Nov 2019 Location: TR Status: Offline Points: 4 |
![]() ![]() ![]() ![]() ![]() Posted: 14 Nov 2019 at 6:30pm |
hello
ASRock Phantom Gaming X RX590, heats up very quickly, running with full power fan and noise. In most games, it works with heat from 80 to 85 and does not drop below 84 degrees after a while. after a while the computer goes to the black screen. I tried another graphics card on my computer and everything was normal. What do you think is the solution ? |
|
![]() |
|
ASRock_TSD ![]() ASRock_Official ![]() Joined: 20 Mar 2015 Status: Offline Points: 8787 |
![]() ![]() ![]() ![]() ![]() |
Dear kemal3131,
This is tech support from ASRock. Thank you for posting your query to ASRock forum. Referring to your question about the temperature, please download the Phantom Gaming Tweak ver:1.0.4 from the link below: https://www.asrock.com/Graphics-Card/AMD/Phantom%20Gaming%20X%20Radeon%20RX590%208G%20OC/#Download With the tool, you are able to increase the fan speed according to the different graphics card temperatures. Also please try to lower the "GPU clock" and "memory clock" and press "Apply." By doing the step above, it should allow the graphics card running at a lower temperature. *Please make sure that the graphics driver is installed from the link below: https://www.asrock.com/Graphics-Card/AMD/Phantom%20Gaming%20U%20Radeon%20RX%20590%208G%20OC/index.asp#Download With thanks, ASRock TSD |
|
![]() |
|
kemal3131 ![]() Newbie ![]() ![]() Joined: 14 Nov 2019 Location: TR Status: Offline Points: 4 |
![]() ![]() ![]() ![]() ![]() |
hi
Thank's for the information my graphics card https://www.asrock.com/Graphics-Card/AMD/Phantom%20Gaming%20X%20Radeon%20RX590%208G%20OC/ Phantom Gaming X Radeon RX590 8G OC everything is normal in low voltage and frequency trials / loud - temperature etc. ( Phantom Gaming Tweak ver:1.0.4) but sometimes going to black screen ? or AMD wattman warning. |
|
![]() |
|
moonstarmac ![]() Newbie ![]() ![]() Joined: 14 May 2017 Location: US Status: Offline Points: 81 |
![]() ![]() ![]() ![]() ![]() |
I have this same card. My suggestion is to go into Wattman and set the minimum RPM to 45%. At the 65C mark, set it to 55% minimum, higher if needed. At 45% - 55% my card maxes out 72C at 100% load. Also, what case are you using? Case airflow is crucial to the RX 500 series. |
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |