(Solved)Samsung Evo 970 Plus on Z97 Killer |
Post Reply | Page 12> |
Author | |
mihaela
Newbie Joined: 13 Dec 2019 Location: bucharest Status: Offline Points: 105 |
Post Options
Thanks(0)
Posted: 22 Jun 2022 at 3:59am |
The M.2 Socket, SATAE_4, SATAE_5 and SATA Express share lanes. If either one of them is in use, the others will be disabled.
read the manual and see the pictures! |
|
tolya21
Newbie Joined: 21 Jun 2022 Status: Offline Points: 15 |
Post Options
Thanks(0)
|
Hello! Bought nvme samsung oem. For a long time I tried to connect 2 hdd and dvd-rw. As a result, we managed to leave 1 HDD and nvme. How can this problem be solved? 1 hdd is not enough
|
|
mihaela
Newbie Joined: 13 Dec 2019 Location: bucharest Status: Offline Points: 105 |
Post Options
Thanks(0)
|
nvm,
The M.2 Socket, SATAE_4, SATAE_5 and SATA Express share lanes. If either one of them is in use, the others will be disabled. solved |
|
mihaela
Newbie Joined: 13 Dec 2019 Location: bucharest Status: Offline Points: 105 |
Post Options
Thanks(0)
|
Finally I bought a ADATA XPG SX8200 Pro 1TB, NVMe, M.2.
I see it in BIOS under Advanced/ NVMe config NVME tab but i cannot see it under Storage config and my other 2 HDDs are gone. I have a SATA3 Samsung Evo 840 and 4 other SATA3 HDDs, i see that the mobo can have 6 SATA3, what am I missing£ thanks ! https://ibb.co/pK3jCRQ https://ibb.co/Z2RY9bN |
|
w3rty88
Newbie Joined: 22 Mar 2020 Status: Offline Points: 5 |
Post Options
Thanks(0)
|
hello guys :) this is my first post. i bump the thread because I have a similar problem.
http://forum.asrock.com/forum_posts.asp?TID=13895&PID=73713𑿱 |
|
JerryWest_44
Newbie Joined: 29 Jan 2020 Status: Offline Points: 3 |
Post Options
Thanks(0)
|
Solved --- The M2 status is for M2 SATA SSD cards not NVME. However the NVME configuration page shows the new 970 EVO plus. Since I have Win7 all I needed was to install Samsung's NVME driver (since these are not part of Win7). Once I installed the drivers, all I had to do is initialize the volume and format the new SSD drive via the Disk Manager -- then I cloned a copy of my older 840 EVO to the new 970 EVO. I rebooted and voila. I'm now booted to me new 1TB 970 EVO plus SSD drive. |
|
JerryWest_44
Newbie Joined: 29 Jan 2020 Status: Offline Points: 3 |
Post Options
Thanks(0)
|
I have a Z97 Killer Fatal1ty
SN: 45M0XD018617 BIOS: 2.60 Win 7 - 64 bit I7-4790 16GB DDR3 Storage: Samsung 840 EVO 250GB via SATA Video: Onboard I installed a Samsung 970 EVO plus 1TB into the M2 slot. However, Storage M2 is not recognized by the BIOS; however, the NVME Controller recognized it. In addition in the boot options page the 970 EVO plus shows up but the legacy 840 EVO does not. Please advise. v/r Joe |
|
JerryWest_44
Newbie Joined: 29 Jan 2020 Status: Offline Points: 3 |
Post Options
Thanks(0)
|
I have a Z97 Killer Fatal1ty SN: 45M0XD018617 BIOS: 2.60 Win 7 - 64 bit I7-4790 16GB DDR3 Storage: Samsung 840 EVO 250GB via SATA Video: Onboard I installed a Samsung 970 EVO plus 1TB into the M2 slot. However, Storage M2 is not recognized by the BIOS; however, the NVME Controller recognized it. Please advise. v/r Joe |
|
ASRock_TSD
ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8727 |
Post Options
Thanks(0)
|
Dear Mihaela,
Thanks for the feedback. We do not have the 660p series, but we checked similar 600P series M.2 instead. And it can be detected under the BIOS/Win10. Hopefully, the information above helps. With thanks, ASRock TSD Edited by ASRock_TSD - 24 Dec 2019 at 4:13pm |
|
mihaela
Newbie Joined: 13 Dec 2019 Location: bucharest Status: Offline Points: 105 |
Post Options
Thanks(0)
|
How about this one?
SSD Intel 660p Series 1TB PCI Express 3.0 x4 M.2 2280 I know the speed is limited at 10Gb, but will it work? PCI Express 3.0 x4 in PCI Express Gen2 x2 many thanks |
|
Post Reply | Page 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |