Pc wont turn on

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Just built pc and the red light indicates two problems with it. Vga and boot. All the fans turn on, when i turn on the power. i checked the psu and gpu connectors. They're both, fine, I dont know what else could be the problem other than my motherboard. And if the problem is a defective motherboard, then im wandering why there are problems with the vga too. When i turn the rig on, the two red lights start at cpu and dram, and then shift down to vga and boot. Already tested the ram, cpu, psu, and storage. The graphics is used and has dust on the inside of it. I dont see any damage on it though. Should i just take everything off of the motherboard other than the psu conncectors and try to boot it up? That sounds like a pain though. Also the vga and boot lights weren't shining earlier. Instead it was the cpu and dram. But i carfully tested those already, so i think that problems fixed. And i installed them as perfectly as i could. Also one of the black boxes is bent: 
https://ibb.co/5h86Ktw

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Asrock1234567 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 20 Dec 2019 Status: Offline Points: 11	Post Options Post Reply Quote Asrock1234567 Report Post Thanks(0) Quote Reply Topic: Pc wont turn on Posted: 20 Dec 2019 at 9:57pm
	Just built pc and the red light indicates two problems with it. Vga and boot. All the fans turn on, when i turn on the power. i checked the psu and gpu connectors. They're both, fine, I dont know what else could be the problem other than my motherboard. And if the problem is a defective motherboard, then im wandering why there are problems with the vga too. When i turn the rig on, the two red lights start at cpu and dram, and then shift down to vga and boot. Already tested the ram, cpu, psu, and storage. The graphics is used and has dust on the inside of it. I dont see any damage on it though. Should i just take everything off of the motherboard other than the psu conncectors and try to boot it up? That sounds like a pain though. Also the vga and boot lights weren't shining earlier. Instead it was the cpu and dram. But i carfully tested those already, so i think that problems fixed. And i installed them as perfectly as i could. Also one of the black boxes is bent: https://ibb.co/5h86Ktw

Asrock1234567 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 20 Dec 2019 Status: Offline Points: 11	Post Options Post Reply Quote Asrock1234567 Report Post Thanks(0) Quote Reply Posted: 20 Dec 2019 at 10:02pm
	I dont know why i put pc wont turn on as the title. *Pc won't boot

Xaltar Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 22793	Post Options Post Reply Quote Xaltar Report Post Thanks(0) Quote Reply Posted: 20 Dec 2019 at 10:49pm
	Make sure your 8pin CPU power connector is connected.


Asrock1234567 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 20 Dec 2019 Status: Offline Points: 11	Post Options Post Reply Quote Asrock1234567 Report Post Thanks(0) Quote Reply Posted: 21 Dec 2019 at 12:19am
	I just checked all the psu connectors. They're fine.

Asrock1234567 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 20 Dec 2019 Status: Offline Points: 11	Post Options Post Reply Quote Asrock1234567 Report Post Thanks(0) Quote Reply Posted: 21 Dec 2019 at 12:27am
	Still isnt booting and shows the two red lights

Xaltar Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 22793	Post Options Post Reply Quote Xaltar Report Post Thanks(0) Quote Reply Posted: 21 Dec 2019 at 2:32am
	I can't read the description of the 2 LEDs that are on. I am going to guess you are using an X570 Phantom Gaming 4. The LEDs indicate issues with the CPU, RAM, GPU or storage. It seems your board has the VGA and Storage LEDs lit but I can't read the writing next to the LEDs in your image. I would remove the CPU and check for bent pins and make sure it is installed correctly. If that doesn't help double check all your connections, RAM, GPU, power etc.


Asrock1234567 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 20 Dec 2019 Status: Offline Points: 11	Post Options Post Reply Quote Asrock1234567 Report Post Thanks(0) Quote Reply Posted: 21 Dec 2019 at 2:32am
	After scouring the web for a few hours, I stumbled upon some very useful information that was actually in my manual the whole time :P: https://forum-en.msi.com/index.php?topic=293661.0 I then looked up what m.2 sticks the x570 phantom 4 supports, and it looks like it might not support mine (cosair mp600 gen 4 PCIe)

Asrock1234567 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 20 Dec 2019 Status: Offline Points: 11	Post Options Post Reply Quote Asrock1234567 Report Post Thanks(0) Quote Reply Posted: 21 Dec 2019 at 3:36am
	No proper cable for this pattern came with the psu.(this is the pattern for the cpu): 1=sqaure 0=other shape. Pattern for cpu cable: 0010 0110 0001 1001 But if the problem is the cpu then was the light working normally where it and the ram turns on and then turns off? And the fan was spinning perfectly too, or is that powered just by the motherboard?

Asrock1234567 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 20 Dec 2019 Status: Offline Points: 11	Post Options Post Reply Quote Asrock1234567 Report Post Thanks(0) Quote Reply Posted: 21 Dec 2019 at 3:44am
	Other than the weird cpu port, theres nothing else wrong with psu or anything wrong with the graphics card or ram. Im gonna check the other wires

Xaltar Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 22793	Post Options Post Reply Quote Xaltar Report Post Thanks(0) Quote Reply Posted: 21 Dec 2019 at 6:10am
	It sounds like you are using a PCIe power connector for the CPU power. This is not the cable you need to connect. It is a 6+2 pin. If you have this cable connected then it is the cause of your problem, of that I am 100% certain. You need to use either an 8pin (4+4) CPU power or a 4pin. The 4pin will only fit in one side of the 8pin connector but it should still work. You may want to consider a newer, more capable PSU. Edited by Xaltar - 21 Dec 2019 at 6:14am