G.SKILL F4-3200C16D-16GTZRX @ ASRock Fatal1ty B450

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi. I have built this system:

-Motherboard: ASRock Fatal1ty B450 Gaming K4.
-CPU: Ryzen 7 2700.
-GPU: GTX 1060, 3GB.
-RAM: G.skill Tridentz Rgb 16gb (2 X 8gb) 3200 Mhz- For Amd (G.SKILL F4-3200C16D-16GTZRX).
-SSD: Ssd Wd 240gb Green M.2 Western Digital.
-Power supply: Evga Bronze 600w 80 Plus 49amp.
-Chassis: Thermaltake V100 Black Mid Tower 1.

I'm running on ubuntu 18.04 LTS system. I have updated the UEFI to version P3.40 (first was P1.50, then I've installed P1.80, and then P3.40).

Althought I have tried to change the memory speed to the 3200Mhz that Gskill says are tested on ryzen cpus, the system gives this information:

$ sudo dmidecode --type 17
# dmidecode 3.1
Getting SMBIOS data from sysfs.
SMBIOS 3.2.1 present.
# SMBIOS implementations newer than version 3.1.1 are not
# fully supported by this version of dmidecode.

Handle 0x0015, DMI type 17, 84 bytes
Memory Device
Array Handle: 0x000E
Error Information Handle: 0x0014
Total Width: 64 bits
Data Width: 64 bits
Size: 8192 MB
Form Factor: DIMM
Set: None
Locator: DIMM 0
Bank Locator: P0 CHANNEL A
Type: DDR4
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 2133 MT/s
Manufacturer: Unknown
Serial Number: 00000000
Asset Tag: Not Specified
Part Number: F4-3200C16-8GTZRX
Rank: 1
Configured Clock Speed: 2133 MT/s
Minimum Voltage: 1.2 V
Maximum Voltage: 1.2 V
Configured Voltage: 1.2 V

Handle 0x0018, DMI type 17, 84 bytes
Memory Device
Array Handle: 0x000E
Error Information Handle: 0x0017
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: Unknown
Set: None
Locator: DIMM 1
Bank Locator: P0 CHANNEL A
Type: Unknown
Type Detail: Unknown
Speed: Unknown
Manufacturer: Unknown
Serial Number: Unknown
Asset Tag: Not Specified
Part Number: Unknown
Rank: Unknown
Configured Clock Speed: Unknown
Minimum Voltage: Unknown
Maximum Voltage: Unknown
Configured Voltage: Unknown

Handle 0x001A, DMI type 17, 84 bytes
Memory Device
Array Handle: 0x000E
Error Information Handle: 0x0019
Total Width: 64 bits
Data Width: 64 bits
Size: 8192 MB
Form Factor: DIMM
Set: None
Locator: DIMM 0
Bank Locator: P0 CHANNEL B
Type: DDR4
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 2133 MT/s
Manufacturer: Unknown
Serial Number: 00000000
Asset Tag: Not Specified
Part Number: F4-3200C16-8GTZRX
Rank: 1
Configured Clock Speed: 2133 MT/s
Minimum Voltage: 1.2 V
Maximum Voltage: 1.2 V
Configured Voltage: 1.2 V

Handle 0x001D, DMI type 17, 84 bytes
Memory Device
Array Handle: 0x000E
Error Information Handle: 0x001C
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: Unknown
Set: None
Locator: DIMM 1
Bank Locator: P0 CHANNEL BConfigured Clock Speed: 2133 MT/s
Type: Unknown
Type Detail: Unknown
Speed: Unknown
Manufacturer: Unknown
Serial Number: Unknown
Asset Tag: Not Specified
Part Number: Unknown
Rank: Unknown
Configured Clock Speed: Unknown
Minimum Voltage: Unknown
Maximum Voltage: Unknown
Configured Voltage: Unknown

How can I make it work at the desired 3200Mhz frequency? I have tried accessing the UEFI, and putting 3200 in there (there are other options, up to 4000Mhz). I haven't touched the 1.2 Voltage, should I specify another votage instead of the default 1.2V?

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Dedalus Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 29 Dec 2019 Location: Argentina Status: Offline Points: 78	Post Options Post Reply Quote Dedalus Report Post Thanks(0) Quote Reply Topic: G.SKILL F4-3200C16D-16GTZRX @ ASRock Fatal1ty B450 Posted: 31 Dec 2019 at 10:42am
	Hi. I have built this system: -Motherboard: ASRock Fatal1ty B450 Gaming K4. -CPU: Ryzen 7 2700. -GPU: GTX 1060, 3GB. -RAM: G.skill Tridentz Rgb 16gb (2 X 8gb) 3200 Mhz- For Amd (G.SKILL F4-3200C16D-16GTZRX). -SSD: Ssd Wd 240gb Green M.2 Western Digital. -Power supply: Evga Bronze 600w 80 Plus 49amp. -Chassis: Thermaltake V100 Black Mid Tower 1. I'm running on ubuntu 18.04 LTS system. I have updated the UEFI to version P3.40 (first was P1.50, then I've installed P1.80, and then P3.40). Althought I have tried to change the memory speed to the 3200Mhz that Gskill says are tested on ryzen cpus, the system gives this information: $ sudo dmidecode --type 17 # dmidecode 3.1 Getting SMBIOS data from sysfs. SMBIOS 3.2.1 present. # SMBIOS implementations newer than version 3.1.1 are not # fully supported by this version of dmidecode. Handle 0x0015, DMI type 17, 84 bytes Memory Device Array Handle: 0x000E Error Information Handle: 0x0014 Total Width: 64 bits Data Width: 64 bits Size: 8192 MB Form Factor: DIMM Set: None Locator: DIMM 0 Bank Locator: P0 CHANNEL A Type: DDR4 Type Detail: Synchronous Unbuffered (Unregistered) Speed: 2133 MT/s Manufacturer: Unknown Serial Number: 00000000 Asset Tag: Not Specified Part Number: F4-3200C16-8GTZRX Rank: 1 Configured Clock Speed: 2133 MT/s Minimum Voltage: 1.2 V Maximum Voltage: 1.2 V Configured Voltage: 1.2 V Handle 0x0018, DMI type 17, 84 bytes Memory Device Array Handle: 0x000E Error Information Handle: 0x0017 Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: Unknown Set: None Locator: DIMM 1 Bank Locator: P0 CHANNEL A Type: Unknown Type Detail: Unknown Speed: Unknown Manufacturer: Unknown Serial Number: Unknown Asset Tag: Not Specified Part Number: Unknown Rank: Unknown Configured Clock Speed: Unknown Minimum Voltage: Unknown Maximum Voltage: Unknown Configured Voltage: Unknown Handle 0x001A, DMI type 17, 84 bytes Memory Device Array Handle: 0x000E Error Information Handle: 0x0019 Total Width: 64 bits Data Width: 64 bits Size: 8192 MB Form Factor: DIMM Set: None Locator: DIMM 0 Bank Locator: P0 CHANNEL B Type: DDR4 Type Detail: Synchronous Unbuffered (Unregistered) Speed: 2133 MT/s Manufacturer: Unknown Serial Number: 00000000 Asset Tag: Not Specified Part Number: F4-3200C16-8GTZRX Rank: 1 Configured Clock Speed: 2133 MT/s Minimum Voltage: 1.2 V Maximum Voltage: 1.2 V Configured Voltage: 1.2 V Handle 0x001D, DMI type 17, 84 bytes Memory Device Array Handle: 0x000E Error Information Handle: 0x001C Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: Unknown Set: None Locator: DIMM 1 Bank Locator: P0 CHANNEL BConfigured Clock Speed: 2133 MT/s Type: Unknown Type Detail: Unknown Speed: Unknown Manufacturer: Unknown Serial Number: Unknown Asset Tag: Not Specified Part Number: Unknown Rank: Unknown Configured Clock Speed: Unknown Minimum Voltage: Unknown Maximum Voltage: Unknown Configured Voltage: Unknown How can I make it work at the desired 3200Mhz frequency? I have tried accessing the UEFI, and putting 3200 in there (there are other options, up to 4000Mhz). I haven't touched the 1.2 Voltage, should I specify another votage instead of the default 1.2V?

gizmic Members Profile Send Private Message Find Members Posts Add to Buddy List Groupie Joined: 13 Jun 2018 Location: Hong Kong Status: Offline Points: 677	Post Options Post Reply Quote gizmic Report Post Thanks(0) Quote Reply Posted: 31 Dec 2019 at 11:37am
	go in to uefi enable XMP it should work switching it to 3200 doesn't make it work there are timings, voltages and speed involved by setting xmp it sets those things for you


Dedalus Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 29 Dec 2019 Location: Argentina Status: Offline Points: 78	Post Options Post Reply Quote Dedalus Report Post Thanks(0) Quote Reply Posted: 01 Jan 2020 at 2:00am
	I've done that, loaded the XMP, which was in auto, and put it into profile 1. But stills showing the same information, same voltages and everything.