ASRock.com Homepage
Forum Home Forum Home > Technical Support > Intel Motherboards
  New Posts New Posts RSS Feed - X299E-ITX/AC troubleshoot
  FAQ FAQ  Forum Search Search  Events   Register Register  Login Login

X299E-ITX/AC troubleshoot

 Post Reply Post Reply
Author
Message
Halebm88 View Drop Down
Newbie
Newbie
Avatar

Joined: 02 Apr 2020
Location: New York
Status: Offline
Points: 4
Post Options Post Options   Thanks (0) Thanks(0)   Quote Halebm88 Quote  Post ReplyReply Direct Link To This Post Topic: X299E-ITX/AC troubleshoot
    Posted: 02 Apr 2020 at 8:22am
Need some help with my new pc build. Below are the specs:
CPU- i9-10900x
Mobo- ASROCK X299E-ITX/AC
RAM- Corsair Vengeance SODIMM DDR4-2400 4x16gb
Video Card- GeForce GTX 1080 FTW
PSU- EVGA 850W 80+ Gold.

The computer turns on, all fans are spinning but I?™m not getting any visuals on my monitors. (Nothing is coming up, no motherboard logo, no bios) I?™ve re seated everything, cycled through the ram to see if that would work and still nothing.

Am I missing something!? Any help would be greatly appreciated!
Back to Top
ASRock_TSD View Drop Down
ASRock_Official
ASRock_Official


Joined: 20 Mar 2015
Status: Offline
Points: 8727
Post Options Post Options   Thanks (0) Thanks(0)   Quote ASRock_TSD Quote  Post ReplyReply Direct Link To This Post Posted: 06 Apr 2020 at 4:29pm
Dear Halebm88,

Thanks for posting!

Try to install only one RAM to each slot followed by a boot to see if it will work.

Then try clear CMOS:
To clear CMOS, please unplug the power cable then press the button on the back panel for more than 3 seconds.

If the problem persists, kindly contact the store where the motherboard was purchased from to check if the BIOS version is 2.10 or newer.

With thanks,
ASRock TSD
Back to Top
Halebm88 View Drop Down
Newbie
Newbie
Avatar

Joined: 02 Apr 2020
Location: New York
Status: Offline
Points: 4
Post Options Post Options   Thanks (0) Thanks(0)   Quote Halebm88 Quote  Post ReplyReply Direct Link To This Post Posted: 08 Apr 2020 at 1:47am
Does this motherboard have at least one USB port on the back to use as a BIOS flashback port so that I can update the BIOS to the correct version to allow my processor to work properly? If so, what are the steps I should take to ensure that works?
Back to Top
ASRock_TSD View Drop Down
ASRock_Official
ASRock_Official


Joined: 20 Mar 2015
Status: Offline
Points: 8727
Post Options Post Options   Thanks (0) Thanks(0)   Quote ASRock_TSD Quote  Post ReplyReply Direct Link To This Post Posted: 09 Apr 2020 at 3:34pm
Dear Halebm88,

Thanks for the feedback.

X299E-ITX/AC does not support the flashback function.

With thanks,
ASRock TSD
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.04
Copyright ©2001-2021 Web Wiz Ltd.

This page was generated in 0.336 seconds.