![]() |
AM4 BIOS info |
Post Reply ![]() |
Page <12345 16> |
Author | |
Neox1111 ![]() Newbie ![]() Joined: 11 Sep 2022 Location: Argentina Status: Offline Points: 110 |
![]() ![]() ![]() ![]() ![]() |
I contact support with the following problem after updating Bios to 7.10 in Asrock killer Sli:
Motherboard: Asrock x 370 killer SLi : Bios 7.20 Video Card: Asrock Phantom Gaming D Radeon RX580 8G OC CPU: Ryzen 7 1700. Hello, I need help to re-activate secureboot, yesterday I updated to bios version 7.10 and when I proceed to activate it, the bios asks me to disable CSM: ¨DISABLE THE CSM IN SETUP. REPEAT OPERATION AFTER REBOOT TO ENSURE UEFI VIDEO (GOP) DRIVER IS OPERATIONAL¨ which causes that I can no longer enter the bios, I am left no video signal and there is no way to get into UEFI BIOS. Apparently the video card does not support GOP. In fact, GOP never worked any previous BIOS version. Until Bios version 7.00 i could activate secureboot without having to disable CSM. Please, I need to return to Bios version 7.00 somehow or a solution to this problem, there is no section does it say not to update with this type of video card. In fact I chose to buy devices of the same brand to avoid compatibility problems. Maybe an update of the video card Firmware will solve this problem or new motherboard BIOS update. |
|
NeoX
|
|
![]() |
|
thediggydoo ![]() Newbie ![]() Joined: 16 Nov 2021 Status: Offline Points: 100 |
![]() ![]() ![]() ![]() ![]() |
BIOS version: 2.11 BETA (Agesa 1.2.0.7)
Board: A520M-HVS CPU: Ryzen 5 5600G RAM: 2 x 8GB Corsair Vengeance LPX CMK16GX4M2B3200C16 (single-rank) Two days since update, stable so far. Have not experienced any problems. |
|
![]() |
|
phazdelta ![]() Newbie ![]() ![]() Joined: 03 Sep 2022 Location: Algeria Status: Offline Points: 15 |
![]() ![]() ![]() ![]() ![]() |
Hello ;
i have Asrock B550 Extrem4 and Ryzen 5600X updated to lastest bios AGESA Combo V2 PI 1.2.0.6b i found a strange bug the new option max cpu boost clock override (Negative-) doesn't work but the (positive+) work only with single core boost my clock stuck at 4.5GHZ doesn't boost to 4.7GHZ only the first Core if add positive +100 is this bug ?? even with AM4 AGESA Combo V2 PI 1.2.0.7 same problem i do love to undervolted my CPU use negative 150 to lock my boost clock to 4.5GHZ but did't work . thank |
|
![]() |
|
StanleyKessler21 ![]() Newbie ![]() ![]() Joined: 27 Aug 2022 Location: United States Status: Offline Points: 30 |
![]() ![]() ![]() ![]() ![]() |
No PROBLEM |
|
![]() |
|
StanleyKessler21 ![]() Newbie ![]() ![]() Joined: 27 Aug 2022 Location: United States Status: Offline Points: 30 |
![]() ![]() ![]() ![]() ![]() |
CPU socket: Socket AM 4
RAM Technology: DIMM Chipset Type: AMD X570 Memory speed: 2133 MHz Memory storage capacity: 128 GB Platform: Windows 10 Compatible processor: AMD 3rd Gen Ryzen Graphic card interface: PCI Express |
|
![]() |
|
dozier768 ![]() Newbie ![]() ![]() Joined: 09 Aug 2022 Location: USA Status: Offline Points: 15 |
![]() ![]() ![]() ![]() ![]() |
Crashes with memory set at anything over 2400, Upgraded from a ryzen 2600x to a 5600
the memory ran at 2933 without issue on the 2600 with the same timings and voltage but the 5600 wont run at anything higher than 2400. it wont run the xmp profile either which it 3200. I upgraded the bios to the latest. Fails MEMTEST86 on anything above and hard crashes. computer shuts off. B450m-hdv R 4.0 Bios version 4.90 Ryzen 5600 "non X, non G" G.Skill ddr4-3200 P/n F4-3200C15-8GVR |
|
![]() |
|
Markz ![]() Newbie ![]() Joined: 12 May 2022 Location: Finland Status: Offline Points: 30 |
![]() ![]() ![]() ![]() ![]() |
Rolled back to AMD AM4 AGESA Combo V2 PI 1.2.0.3 Patch C after looking about info that 1.2.0.7 still has some bug which doesn't give proper CPU boost (it should've been fixed by now, but it is not) so the best working bios version for now is AMD AM4 AGESA Combo V2 PI 1.2.0.3 Patch C for X570 Steel Legend. |
|
![]() |
|
Mr mathias ![]() Newbie ![]() Joined: 02 Jun 2022 Status: Offline Points: 15 |
![]() ![]() ![]() ![]() ![]() |
Board model: x570m Pro4
BIOS version: P3.70 CPU: Ryzen 3600x RAM: Corsair vengeance 2x8GB Notes: Boot problem, If power has not been completely switch off since last shutdown computer will start fans and run indefinitely without any display, or bios start. Boots normally into windows after plug has been pulled for 15 sec. |
|
![]() |
|
Markz ![]() Newbie ![]() Joined: 12 May 2022 Location: Finland Status: Offline Points: 30 |
![]() ![]() ![]() ![]() ![]() |
Motherboard: X570 Steel Legend (no Wi-Fi)
BIOS version: 3.90 Update AMD AM4 AGESA Combo V2 PI 1.2.0.6b CPU: Ryzen 5 3600X RAM: Kingston HyperX Predator DDR4 RGB 3200MHz 16GB (2x8GB kit) There are issues with this bios version. It's giving WHEA LOGGER EventID 18's (Processor Core) and hard reboots after an hour or sometimes after 2-6 hours or more while playing. So i'm waiting for 1.2.0.7 to appear so i can update it. Been looking for bios version update daily since it was released to other motherboards. |
|
![]() |
|
thediggydoo ![]() Newbie ![]() Joined: 16 Nov 2021 Status: Offline Points: 100 |
![]() ![]() ![]() ![]() ![]() |
Board: A520M-HVS
BIOS version: 2.10 (Agesa 1.2.0.6b) CPU: Ryzen 5 5600G RAM: 2 x 8GB Corsair Vengeance LPX CMK16GX4M2B3200C16 (single-rank) Stable, no obvious problems noticed, but the usual strange behavior of 5 reboot loops directly after BIOS upgrade happened again. I feel like it might be performing a bit slower than on BIOS 1.90 - at least I remember 7za benchmark (memory intensive) being better before, but I can't confirm 100% since I forgot to save benchmark results from before updating to BIOS 2.10. |
|
![]() |
Post Reply ![]() |
Page <12345 16> |
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |