AM4 BIOS info |
Post Reply | Page <1 13141516> |
Author | |
AbsorbingUnderwear
Newbie Joined: 24 Aug 2020 Location: Netherlands Status: Offline Points: 18 |
Post Options
Thanks(0)
|
Board model: X370 Taichi
BIOS version: P5.60 (latest Summit Ridge support) CPU: Ryzen 7 1800X (3.6-4.0Ghz) RAM: G.Skill Flare X 3200Mhz 32Gb (2x F4-3200C14D-16GFX) Notes: User Interface CPU Fan 1 Setting - CPU Fan 1 Temp Source shows "Monitor M/B" and "Monitor CPU, however this should be "Monitor Tctrl" and "Monitor CPU" Personally I do not trust the fan control at all and not sure what the fans react to Bios upgrade performed nominal + flushed all previous settings. Re-flash did not solve the issue. Workaround: - Set "Monitor CPU" manually to be safe - Use Asrock Tuning Utility to set fan profiles The rest of the build seems to run stable with CPU 3.6-4.0Ghz (AMD CBS + Manual both stable) and 32Gb of RAM running at a stable 3200Ghz which is as promised capabilities, however it does require some minor sanitized settings. It would be nice to finally see a fully bugless BIOS for the X370 Taichi flagship after those years. Someone at Asrock Support promised once LOL Apart from that CPU cooling control UI bug this build did not give me a single BSOD and performed as intended in my case, however the bug around cooling control murders all the other success. Can't wait to see the Glory BIOS for the X370 Taichi Roland |
|
A Computer Guy
Newbie Joined: 25 Nov 2019 Status: Offline Points: 10 |
Post Options
Thanks(0)
|
Board model: X470 Master SLI/ac
BIOS version: P3.70 CPU: Ryzen 7 3800X or Ryzen 9 3950x RAM: Crucial 16GB DDR4 SDRAM ECC Unbuffered DDR4 2666 (PC4 21300) CT16G4WFD8266 - The BIOS has really improved since P1.90 - BIOS/UEFI version P3.70 allowed this ram to work flawlessly and OC to DDR4-3200. (64GB) - The BIOS option doesn't seem to allow memtest86 ecc error injection function to work - It would be nice if the BIOS could use the onboard rgb as trouble shooting LEDs - The online bios update was a nice feature, if they bring it back it would be nice to use it for the rgb firmware too - Many ram options don't have any description for their function |
|
CopyThat
Newbie Joined: 29 Sep 2018 Status: Offline Points: 102 |
Post Options
Thanks(0)
|
Board model: X570 Extreme4 BIOS version: 2.80 CPU: Ryzen 7 3800X RAM:G Skill RipjawsV F4-3600C16-8GVKC Notes: 2.80 had problems with missing pages in BIOS, Boot loops, incorrect overclocking. Reverted to 2.60. |
|
ThreeDee
Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396 |
Post Options
Thanks(0)
|
Board model:x570 Steel Legend
BIOS version:2.80 CPU:3700x RAM:2 x 16GB Hynix chipped HyperX Predators 3200mhz CAS 16 Notes:I don't recall what exactly, but there were missing settings with 2.80 vs 2.60. On 2.80, I can only do XMP profile or slower on RAM vs 2.60 I can run my memory @ 3800mhz CAS 18 w/fclk 1900 (1:1). Reverted back to 2.60 |
|
|Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15|
|
|
AndersWSP
Newbie Joined: 12 Aug 2020 Location: Denmark Status: Offline Points: 4 |
Post Options
Thanks(0)
|
Board model: x570 Phantom Gaming 4
BIOS version: 3.10 CPU: 3600 RAM: G.Skill TridentZ Neo DDR4-3600 C16 DC (AMD) - 16GB (2x8) Notes: Updated BIOS in an attempt to solve cpu not boosting to advertised speeds. Still does not boost to 4,2 - but now previously working XMP 3600 profile results in machine not booting a few times until it reverts to lower speeds. 3600 memory still -kind of-works when set from Ryzen Master, but can no longer hit timings from before. |
|
Insert something funny.
|
|
vekspec
Newbie Joined: 09 Jul 2020 Status: Offline Points: 1 |
Post Options
Thanks(0)
|
Board model: X570 Extreme4
BIOS version: 2.80 CPU: Ryzen 7 3700X RAM: 16GB Gskill Trident Z Neo 3600 (F4-3600C16D-16GTZNC) Notes: Upon installing 2.80 bios, XMP profile no longer works and selecting it would cause the system to end up in an endless loop rebooting over and over with the CPU fan (Prism) to be run at max speed. Manually selecting 3600 Speed in BIOS cause the same issue. Reverting back to 2.6 resolves issue. |
|
Ryzen 7 3700X (Prism) | ASRock X570 Extreme4 | 16GB 3600 GSKILL NEO RGB | x2 1TB Samsung 970 EVO | RTX 2070S EVGA XC Ultra | Corsair TX650M | Asus TUF VG27AQ 165hz 1440P
|
|
John291
Newbie Joined: 13 Jul 2019 Location: gb Status: Offline Points: 7 |
Post Options
Thanks(0)
|
Board model: X470 Taichi
BIOS version: 4.20 CPU 3700X TeamGroup Dark Pro "8Pack Edition" 4x8 32GB PC4-25600C14 3200 Running at 3600 C16 Volt 1.36 Manual Soc 1.05 VDDG CCD Voltage 0.950 VDDG IOD " " " 0.950 CLDO VDDP " " " 0.950 NO PROBLEM |
|
jbailey
|
|
gizmic
Groupie Joined: 13 Jun 2018 Location: Hong Kong Status: Offline Points: 677 |
Post Options
Thanks(0)
|
Board model: X470 Taichi Ultimate
BIOS version: 4.20 CPU: 3950X RAM: G.Skill F4-4000C18-8GTZR (8GBX2) @ 3600 CL 16 Notes: Enabled eco mode and NEW Dram low latency function. Seems 4.XX onwards the random bios restart bug have been solved. The only problem i'm having which isn't a problem for me but may cause problems for new builders. On default Auto my SoC voltage is set to 1.2v which causes stuttering in videos be it mp4, avi and youtube and sound cracking. Solution manual set SoC to 1.1v |
|
|
|
aShakyamuni
Newbie Joined: 11 Aug 2020 Status: Offline Points: 1 |
Post Options
Thanks(0)
|
Board model: X470 Taichi
BIOS version: P3.90 CPU: R5 3600 RAM: Ballistix Sport LT CL-15 32GB (2x 16GB) 288-Pin dual rank BLS2K16G4D30AESC Notes: Computer will not boot when I Push the power button. Lights, fans come on, then fans stop, lights stay on, no boot. I need to turn off then on the power supply switch, and eventually 2-6 tries the computer boots. Once, I had to reset bios. I built this yesterday. This board came back from an RMA. The non-boot sequence: When I push power button, lights come on, some fans turn then stop turning. Oddly, the rear exhaust fan is the only one that keeps spinning. Sometimes no fans, always the colored mb lights and power light come on. In my experience, this seriously points to motherboard failure, especially with that one fan spinning and the rest stopping. I will replace the ram and try this again (this is known good working ram). Someone mentioned this same problem and suggested to boost the ram voltage. So, maybe this is a ram compatibility problem. |
|
live in the state of let-go
|
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24278 |
Post Options
Thanks(0)
|
Sample format:
Board model: BIOS version: CPU: RAM: Notes: Edited by Xaltar - 06 Aug 2020 at 2:50am |
|
|
|
Post Reply | Page <1 13141516> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |