AM4 BIOS info

Board model Fatal1ty X470 Gaming K4
BIOS 4.20
CPU: Ryzen 3600
TridentZ Neo 32 GB 3600MHz CL16

Boots and runs fine with XMP settings despite board being capped at 3433MHz OC according to the user manual. I thought i was going to have to downclock this and go for tighter timings but it works fine.

Board model: B550M Steel Legend
BIOS version:
CPU: Ryzen 5 3600
RAM: CMW16GX4M2C3200C16 CORSAIR 3200MHZ VER 4.32

Notes:

I have a problem with the ram memory, it does not let me put it at 3200MHZ speed, I activate the XMP profile and the pc turns off and the bios restarts.

It only allows me to put 3000 MHZ with these memories and tried any solution?

ThreeDee wrote: giuliopuma wrote: Board model: B550M Steel Legend BIOS version: CPU: Ryzen 5 3600 RAM: CMW16GX4M2C3200C16 CORSAIR 3200MHZ VER 4.32 Notes: I have a problem with the ram memory, it does not let me put it at 3200MHZ speed, I activate the XMP profile and the pc turns off and the bios restarts. It only allows me to put 3000 MHZ with these memories and tried any solution? couple things to try up the voltage a bit .. I have read a lot of users saying Corsair RAM sometimes needs a bit more voltage to run them .. so try 1.375v or similar. try setting memory manually to 3200 instead of XMP make sure you have memory installed in slots A2/B2 if only 2 sticks

solved thanks a lot, activate the xmp profile again and change the ram memory slots to the A2 / B2 and it works with without having to modify the voltage thanks.

Board model: X570 Extreme4
BIOS version: 2.80
CPU: Ryzen 5 3700X
RAM: 48Gb (2x8Gb & 2x16Gb) HyperX Predator 3200 CL16 @ XMP

Updated from 2.80 to 3.00 and a lot of problems with the memory speed, suddenly the memory revert to JEDEC speed of 2400Mhz when power up the system. If I enter to BIOS and enable the XMP profile@3200Mhz it works normally and can keep the profile during some time, but after some days it reverts to the 2400Mhz.

I've downgraded the BIOS to the 2.80 version more than 2 weeks ago and no speed issues until today.

Something happens with the 3.80 BIOS version.

Board model: ASRock x570 Creator
BIOS version: V3.00
CPU: AMD Ryzen 9 3900XT
RAM: Corsair Vengeance RGB PRO CMW64GX4M2D3600C18

Notes: Issue no. 1: The RAM will not clock above 2166MHz. My ram is Corsair Vengeance RGB PRO CMW64GX4M2D3600C18 . Other users report XMP profiles working right. In my case if i use XMP profile 7/10 times it will not even post with 8d error code. When it posts and W10 Boots something really weird happens. It will run stable even benchmarks - stress tests at full on Prime95 and Aida64 (even with AMD Ryzen Master Auto OC) up to 2.5 hours tested on all scenarios with no errors. Then at random, it might be task manager or opening a project on Da Vinci Resolve 16 or even Windows Explorer that instantly shuts down the PC. No BSOD, just instant power off. Also tried changing RAM pairs, also lanes, also the other pair that i have available. I even used DRAM Calculator for Ryzen exported my RAM Timings from Thaiphoon Burner to see timings and import them manually on BIOS (for 3600C18). No luck at all.