|
5 beeps |
Post Reply 
|
| Author | |
Nayeli 
Newbie 
Joined: 11 Nov 2017 Status: Offline Points: 17 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: 5 beepsPosted: 29 Sep 2020 at 2:01pm |
|
Hi, today I assemble a new AB350 Pro4 computer, but when I turn on system it just 5 short beeps. Not sure what is means and what may be the problem.
I am using 1700X and 8GBx2 RAM for my system, thank you for tour help. |
|
 |
|
|
ASRock_TSD
ASRock_Official 
Joined: 20 Mar 2015 Status: Offline Points: 8727 |
Post Options
Thanks(0)
Quote Reply
Posted: 29 Sep 2020 at 2:34pm |
|
Dear Nayeli,
Greetings, this is ASRock TSD. Regarding your question about 5 beeps, it means that the graphics card is not be detected. Please install a graphics card to the system and then check it again. Thanks! All the best, ASRock TSD |
|
|
|
|
Xaltar
Moderator Group 
Joined: 16 May 2015 Location: Europe Status: Offline Points: 24518 |
Post Options
Thanks(0)
Quote Reply
Posted: 29 Sep 2020 at 3:41pm |
|
As ASRock_TSD noted, you need a dedicated graphics card. Your 1700x does not have
integrated graphics so you cannot use the motherboard's display outputs. Those are there for when an APU is installed: 2200g/3200g,2400g/3400g, 200ge/3000g etc. |
|
|
|
|
|
|
Nayeli
Newbie
Joined: 11 Nov 2017 Status: Offline Points: 17 |
Post Options
Thanks(0)
Quote Reply
Posted: 06 Oct 2020 at 2:49pm |
|
Thanks for all the information.
Now i install a VGA card and so far so good!! |
|
|
|
|
Xaltar
Moderator Group
Joined: 16 May 2015 Location: Europe Status: Offline Points: 24518 |
Post Options
Thanks(0)
Quote Reply
Posted: 07 Oct 2020 at 3:47am |
|
Glad to hear it, enjoy your new system
|
|
|
|
|
|
|
|
pelishminer
Newbie
Joined: 18 Apr 2022 Location: Oz Status: Offline Points: 75 |
Post Options
Thanks(0)
Quote Reply
Posted: 22 Aug 2022 at 9:36am |
|
Funny I have tried a couple of different cards and still get 5 beeps. I know what the 5 beeps means. But it appears to me that this might not be the issue. Because this is my second board and it did not happen like this with my first board. But the first board did end up at RMA after several months. The cards I used were brand new out of the box. They powered up easily. So, do we have any other suggestions what the 5 beeps is about? Did I mention the CPU is brand new also? :(
|
|
|
|
|
kerberos_20
Senior Member 
Joined: 06 Dec 2017 Location: czech republic Status: Offline Points: 3657 |
Post Options
Thanks(0)
Quote Reply
Posted: 22 Aug 2022 at 9:49am |
|
5 beeps still remains GPU not detected
there might be few reasons for it 1) GPU is not sitting properly in PCI-E slot, try to reseat it and make sure it properly "clicks" 2) PCI-E slot might be damaged, try inserting your GPU into anoter PCI-E slot 3) CPU pins might be bent, which can render your first PCI-E not working (its directly connected to CPU, where other PCI-E slots runs through chipset 4) if BIOS has CSM option disabled and GPU cannot find any monitor connected to it (no edid), could be HDMI/DP cable not fully inserted (like with bad case design), cable could be damaged, or you have TV which is powered off |
|
|
|
|
pelishminer
Newbie
Joined: 18 Apr 2022 Location: Oz Status: Offline Points: 75 |
Post Options
Thanks(0)
Quote Reply
Posted: 22 Aug 2022 at 9:58am |
|
Tried and check all these already.
5 beeps still remains GPU not detected there might be few reasons for it 1) GPU is not sitting properly in PCI-E slot, try to reseat it and make sure it properly "clicks" 2) PCI-E slot might be damaged, try inserting your GPU into anoter PCI-E slot 3) CPU pins might be bent, which can render your first PCI-E not working (its directly connected to CPU, where other PCI-E slots runs through chipset I will try anther CPU tomorrow, which will mean that the onboard graphics wont work. I will also try the cable thing. |
|
|
|
|
pelishminer
Newbie
Joined: 18 Apr 2022 Location: Oz Status: Offline Points: 75 |
Post Options
Thanks(0)
Quote Reply
Posted: 22 Aug 2022 at 10:12am |
Unsteated backplate from GPU, and switched out HDMI cable and now I am into the BIOS. Now I have to work my magic with a thumb-drive. Thank you for your help |
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
pelishminer wrote: