Aquantia Not working X470 Taichi Ultimate

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I've spent at least 3 days attempting to make on onboard 10Gb Aquantia QC107 work on my ASRock X470 Taichi Ultimate
** It works both for Fedora 33 and Ubuntu
** Does not work under Windows 10 or 8.

Have tried the driver on ASRock Website and every driver I could find on the internet.
Have attempted to modify .inf files with no success.
Attempted virgin fresh installs of Windows 10  and 8 with no success.
Have tried every BIOS from 3.3 to 4.2

Have run out of ideas and was hoping someone can point out the most likely foolish mistake I£�ve made.  And hopefully, ASRock tech support will provide some guidance.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Naenyc Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 16 May 2019 Status: Offline Points: 27	Post Options Post Reply Quote Naenyc Report Post Thanks(0) Quote Reply Topic: Aquantia Not working X470 Taichi Ultimate Posted: 10 Mar 2021 at 11:14pm
	I've spent at least 3 days attempting to make on onboard 10Gb Aquantia QC107 work on my ASRock X470 Taichi Ultimate It works both for Fedora 33 and Ubuntu Does not work under Windows 10 or 8. Have tried the driver on ASRock Website and every driver I could find on the internet. Have attempted to modify .inf files with no success. Attempted virgin fresh installs of Windows 10 and 8 with no success. Have tried every BIOS from 3.3 to 4.2 Have run out of ideas and was hoping someone can point out the most likely foolish mistake I£�ve made. And hopefully, ASRock tech support will provide some guidance.

ASRock_TSD Members Profile Send Private Message Find Members Posts Add to Buddy List ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8787	Post Options Post Reply Quote ASRock_TSD Report Post Thanks(0) Quote Reply Posted: 12 Mar 2021 at 7:36pm
	Hi Naenyc, Thank you for the posting. For this case, we would like to provide some suggestions for you to verify. 1. Clear CMOS by pressing the CLR CMOS button after removing the power. 2. Keep BIOS setting default and only install the CPU, PSU, Cooler, RAM, System disk, Graphics card to test. 3. Reinstall a clean Win 10 20H2 OS and driver to verify. 4. Re-flash the BIOS P4.20 to try. Thank you, Best wishes, ASRock TSD

Naenyc Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 16 May 2019 Status: Offline Points: 27	Post Options Post Reply Quote Naenyc Report Post Thanks(0) Quote Reply Posted: 12 Mar 2021 at 11:38pm
	Thanks, ASRock TSD. I've attempted to clear CMOS by pressing on both the rear and MB buttons in addition to pulling the battery for 1/2 hour. What is interesting, none of the presets disappear as in past MBs. Maybe something is cached in the system resource table. I've attempted fresh installs of both virgin and latest windows to no avail This is perplexing as an unknown device shows up but refuses to accept the driver. Could the driver on the website be different than the DVD, which I no longer possess£ Is it possible to send/post a video£ Really don't want to RMA this as the next board may have the same issue. Thanks