![]() |
H510 PRO BTC+ |
Post Reply ![]() |
Page <12345 13> |
Author | |
Rankl ![]() Newbie ![]() Joined: 22 Aug 2021 Status: Offline Points: 45 |
![]() ![]() ![]() ![]() ![]() |
i don´t get it to run at all.
CPU and RAM are from the compability list, but i dont get into the BIOS. Any advice what could be wrong? |
|
![]() |
|
usafmike76 ![]() Newbie ![]() Joined: 13 Jul 2021 Status: Offline Points: 270 |
![]() ![]() ![]() ![]() ![]() |
What happens when you power on? Did you try to run without an OS and see if you can get to bios?
|
|
![]() |
|
Rankl ![]() Newbie ![]() Joined: 22 Aug 2021 Status: Offline Points: 45 |
![]() ![]() ![]() ![]() ![]() |
The CPU fan is running and also the gpu is lighting up and the fan running.
Thats all. No clue. Did un/re plug all components |
|
![]() |
|
Rankl ![]() Newbie ![]() Joined: 22 Aug 2021 Status: Offline Points: 45 |
![]() ![]() ![]() ![]() ![]() |
I don´t have an os installed. The issue is from the beginning. Still didnt get it to run
|
|
![]() |
|
Talkwrench ![]() Newbie ![]() Joined: 22 Aug 2021 Location: UK Status: Offline Points: 30 |
![]() ![]() ![]() ![]() ![]() |
Well after many days of trying everything. I finally got this working! I can't believe how stupid I was lol. Once I put power on the PCIE power headers on the motherboard it worked. It seems the MB can run 2 cards without any additional power on the PCIE sockets. Anyway, I hope that helps someone.
|
|
![]() |
|
Monty ![]() Newbie ![]() ![]() Joined: 26 Aug 2021 Location: UK Status: Offline Points: 15 |
![]() ![]() ![]() ![]() ![]() |
Thanks for the tips. I am just setting my board up.
2060 super in slot 1 works fine. 3060 in slot 2 is not recognised. If I want to add gpu in slots 3 to 6 unclear about what cable to use from psu to motherboard pci connection. The motherboard has molex connectors which it says to connect to pcie power. Corsair psu s come with 4 pin molex connectors which plug into the 6 pin serial/sata ports on the power supply. Is that where you connect the molex ones to ? Or what cable does one need ? As I don't know of a cable with 4 pin molex at one end and 8 pin pcie at psu end ?? |
|
![]() |
|
ASRock_TSD ![]() ASRock_Official ![]() Joined: 20 Mar 2015 Status: Offline Points: 8802 |
![]() ![]() ![]() ![]() ![]() |
Hi All,
The following shows how we config a mining rig with H510 Pro BTC+, for your reference. https://www.asrock.com/support/faq.asp?id=503 All the best ASRock TSD |
|
![]() |
|
Fullcount ![]() Newbie ![]() Joined: 27 Aug 2021 Location: Netherlands Status: Offline Points: 15 |
![]() ![]() ![]() ![]() ![]() |
Hey all.
I've build a wooden stand with 2 power supplies to fit this board. I've had it running after some troubles and installed windows. After some idling the pc shutdown on its own and will not start whatsoever anymore. Both my power supplies make a clicking noise but not in sync. I'm suspecting that the power supplies aren't being controlled in sync and that may have caused problems or even damage, since the motherboard doesn't turn on anymore. Anyone run into the same kind of problems? |
|
![]() |
|
society ![]() Newbie ![]() ![]() Joined: 29 Aug 2021 Location: USA Status: Offline Points: 90 |
![]() ![]() ![]() ![]() ![]() |
Thank you, but to be more specific.... Your image says power (PSU1) from USB riser cards? Do you mean that we cannot use the PCIE slots for GPUS in PCIE1 & PCIE2 ? We must use riser cards for slot 1 & 2 if we use more than one PSU? Thank you. |
|
H510 Pro BTC+
|
|
![]() |
|
Justin_R ![]() Newbie ![]() Joined: 30 Aug 2021 Status: Offline Points: 65 |
![]() ![]() ![]() ![]() ![]() |
I read that diagram as saying that if you are running a card from the Mining Port, that would be on a riser and powered by PSU1.
|
|
![]() |
Post Reply ![]() |
Page <12345 13> |
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |