Polychrome not detecting 6700 XT GPU |
Post Reply | Page <1 234 |
Author | |
ASRock_TSD
ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8727 |
Post Options
Thanks(0)
|
Dear Apc01352,
Thank you for posting your query to the ASRock forum. We are currently making the RGB firmware, kindly stay tuned. With thanks, ASRock TSD |
|
apc01352
Newbie Joined: 19 Mar 2021 Location: New York Status: Offline Points: 105 |
Post Options
Thanks(0)
|
I just purchased the phantom gaming d 6700xt. Two issues: as stated in the title, polychrome will not detect the GPU. The RGB is stuck on purple/blue which i believe are the opening colors of the RGB rainbow. Also, fan speed cannot be detected by monitoring software.
Motherboard (PG velocita) has most recent bios. Polychrome is on version 2.0.94 I had this exact same issue with my phantom gaming d 5700xt and was provided the below instructions and software. Is there a similar fix for this card? Regarding your question, kindly refer to the following: 1. Boot up the system and install the graphics card driver. 2. Download the following tool and unzip it. https://download.asrock.com/TSD/Desktop/RGBFW/GPU/RX5700XT_PGD.zip 3. Run command prompt as Administrator. 4. Go to the directory of where the tool is located. e.g. Type cd (Directory of the RX5700XT_PGD file) 5. Run the update tool by typing "Update_RX5700_PG.cmd" 6. The update process may take a while. 7. When the message "Update Pass" shows up, it means that the graphics card firmware has been flashed successfully. 8. Please turn on the RGB software and check if the RGB can be controlled properly. https://download.asrock.com/Utility/RGB/PolychromeRGB(v2.0.94).zip |
|
Post Reply | Page <1 234 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |