Cant get new RYZEN CPU to run with AB350 gaming K4 |
Post Reply |
Author | |
Stu18
Newbie Joined: 29 Dec 2017 Status: Offline Points: 85 |
Post Options
Thanks(0)
Posted: 13 Mar 2022 at 1:01am |
I checked the cPU compatibility list for the Motherboard and up dated the BIOS to 5.80 which is the highest i can go as my current CPU is a summit ridge RYZEN 5 1600, i checked the serial number of the new CPU and it matched exactly the number of the 7 3700X (3rd gen ryzen CPU) i want to upgrade to, and it said that the bios version needed to to be 5.80 or higher so i purchased the CPU brand new fitted it into my PC and it wont boot up..the PC stats runs for 10 seconds then as soon as the CPU fan starts the PC reboots itself and does that over and over.
so i double check every thing making sure the CPU/fan are seated properly etc..exactly the same issue.. so in order to get my PC working i reinstalled my old CPU and it booted up straight away. I have no idea how i am supposed to get my PC to boot up with this CPU if you check the CPU compatibility list for the Gaming K4 Motherboard you will see this very CPU listed as 100% Compatible apart from the fact that i have effectively wasted £200 what else can i try to get it running..its really annoying when i was so careful to only get CPU that is on the compatibility list for my motherboard and it wont work |
|
threadzipper1957
Senior Member Joined: 05 Mar 2022 Status: Offline Points: 9365 |
Post Options
Thanks(0)
|
Hello Stu,
Which BIOS was on the board, before you flashed the BIOS? Keep in mind you have to have at least Version 3.40, before updating to the latest BIOS, 3.40 is a bridge BIOS, then the next step would be to update to BIOS to 5.40, from there you can update to 5.80 and above http://www.asrock.com/mb/AMD/Fatal1ty%20AB350%20Gaming%20K4/index.asp#BIOS |
|
Kind Regards
|
|
Stu18
Newbie Joined: 29 Dec 2017 Status: Offline Points: 85 |
Post Options
Thanks(0)
|
Hi Thanks for your reply...5.40 was on the board before i upgraded to 5.80
i followed the upgrade path for a summit ridge CPU on the 7 3700x CPU that i have purchased to upgrade to (so i can run Windows 11) the requirement according to the CPU support list for my Motherboard is 5.80 or higher..so there should be no reason at all why it wont boot up perfectly normally I have emailed AS ROCK System support as well as posting on this forum so hopefully they will also get back to me with a reasonable solution |
|
threadzipper1957
Senior Member Joined: 05 Mar 2022 Status: Offline Points: 9365 |
Post Options
Thanks(0)
|
I think, ASRock support can help you.
One thing, are you certain the 3700X CPU is okay, because this should work |
|
Kind Regards
|
|
Stu18
Newbie Joined: 29 Dec 2017 Status: Offline Points: 85 |
Post Options
Thanks(0)
|
I bought in brand new in the box the seal was completely intact and i registered it with AMD by scanning the QR code on the label and they confimed it was agenuine AMD product and the hologram was correct for a genuine boxed item..yet i still cant get it to boot it is very strange because it is like it doesn't work
AS ROck system support got back to me and told me to update the BIOS to 6.40 which i did but still no luck |
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24713 |
Post Options
Thanks(0)
|
Unfortunately, new, sealed in box doesn't necessarily mean guaranteed working anymore.
I am not saying the CPU is dead, only that new doesn't mean what it used to. In quite a few cases on the forums a DOA CPU was behind other community member's issues. Most often a marginal/bad IMC (memory controller on the CPU). If you can get the system into the UEFI with your old CPU, try setting the RAM to XMP off and the lowest frequency you have an option for. If the IMC is marginal then that might get you a POST screen on the 3700x. If it works, RMA the CPU. It means the IMC is faulty/bad/marginal and not operating within spec. |
|
|
|
theMovement
Newbie Joined: 06 Jun 2022 Status: Offline Points: 15 |
Post Options
Thanks(0)
|
I'm at 3.00 can I just jump right up to the bridge BIOS or do I have to work my way up to 3.30 to safely install newer BIOS updates? |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |