ASRock DeskMini X300 memory slot B1 issue

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi,

my new ASRock X300 does not boot, when memory is installed in DDR4_B1. The power LED is not lid but the CPU fan spins.

When the DIMM is removed from the slot it boots perfectly.

I changed the configuration around (tried different DIMMS, tried, A1 and B1 only, ...) but the system only boots, when only A1 is loaded with a DIMM, the moment a DIMM is installed in B1, no booting.

COnfiguration:

AMD Athlon 3000G 2x 3.50GHz So.AM4 TRAY
ASRock DeskMini X300 (90BXG3T01-A10GA0W)
2 x 8GB Crucial DDR4-2666 SO-DIMM CL19 Single
500GB KIOXIA Exceria M.2 PCIe 3.0 x4 3D-NAND TLC (LRC10Z500GG8)
Noctua NH-L9a-AM4 Topblow Cooler

IS this a known issues or a hardware defect?

Thanks,
Stefan

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
kraemer_sg Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 03 Apr 2022 Status: Offline Points: 80	Post Options Post Reply Quote kraemer_sg Report Post Thanks(0) Quote Reply Topic: ASRock DeskMini X300 memory slot B1 issue Posted: 03 Apr 2022 at 5:05am
	Hi, my new ASRock X300 does not boot, when memory is installed in DDR4_B1. The power LED is not lid but the CPU fan spins. When the DIMM is removed from the slot it boots perfectly. I changed the configuration around (tried different DIMMS, tried, A1 and B1 only, ...) but the system only boots, when only A1 is loaded with a DIMM, the moment a DIMM is installed in B1, no booting. COnfiguration: AMD Athlon 3000G 2x 3.50GHz So.AM4 TRAY ASRock DeskMini X300 (90BXG3T01-A10GA0W) 2 x 8GB Crucial DDR4-2666 SO-DIMM CL19 Single 500GB KIOXIA Exceria M.2 PCIe 3.0 x4 3D-NAND TLC (LRC10Z500GG8) Noctua NH-L9a-AM4 Topblow Cooler IS this a known issues or a hardware defect? Thanks, Stefan

threadzipper1957 Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 05 Mar 2022 Status: Offline Points: 9365	Post Options Post Reply Quote threadzipper1957 Report Post Thanks(0) Quote Reply Posted: 05 Apr 2022 at 7:36pm
	Hi Stefan, The memory controller is integrated in the CPU, so there is a direct link between pins of the CPU, and contacts in the memory slot. One important thing, did you buy 2 separate modules, or a kit of 2? In a kit, chips on the memory, are produced in the same batch, so identical, with 2 separate modules it can be different. But from what you write, I understand, that only 1 module in B1 is also not working. It is not really clear if you tried only B1, and tested with both modules. It does seem hardware related, but first test each slot individual with 1 module My guess would be a defective CPU, or maybe a bent pin on the CPU. If both have been purchased from the same dealer, return the both, so they can test
	Kind Regards

kraemer_sg Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 03 Apr 2022 Status: Offline Points: 80	Post Options Post Reply Quote kraemer_sg Report Post Thanks(0) Quote Reply Posted: 06 Apr 2022 at 4:28pm
	Hi, thanks for the answer. Here is what I tried: * Both memory modules separately in A1 -> System works * Both memory modules separately in B1 -> System does not boot, LED off * Both memory modules in both slots, both ways (two possibilities) -> System does not boot, LED off Unfortunately, I can't test the components in a different system and X300 cannot be bought anywhere at the moment. What I will try: I will take the system apart again and re-assemble to see if that helps. If not, I will run it with one DIMM, as we need the system and wait for the X300 to be available again and buy a second one to check the components. In the meantime, I bought a 16 GB DIMM to use in A1 to run the system with sufficient memory. Warranty has not run out yet, so I can wait for a few weeks, return time has run out, as I bought the system in January but only now had the time to assemble it. I'll keep you posted. Stefan

threadzipper1957 Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 05 Mar 2022 Status: Offline Points: 9365	Post Options Post Reply Quote threadzipper1957 Report Post Thanks(0) Quote Reply Posted: 06 Apr 2022 at 5:52pm
	Hi Stefan, Retrun period has expired maybe, but in EU, warranty is always between seller and buyer, so maybe the seller still has a replacement. Did you try, to disconenct the powersupply, then press the start button for 30 or so seconds, after that short circuit the ClrCMOS pins (Nr. 2 in the online PDF manual)
	Kind Regards

kraemer_sg Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 03 Apr 2022 Status: Offline Points: 80	Post Options Post Reply Quote kraemer_sg Report Post Thanks(0) Quote Reply Posted: 06 Apr 2022 at 6:08pm
	Hi, I haven't tried that yet, but it is good advice that I will try.

threadzipper1957 Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 05 Mar 2022 Status: Offline Points: 9365	Post Options Post Reply Quote threadzipper1957 Report Post Thanks(0) Quote Reply Posted: 06 Apr 2022 at 7:48pm
	Maybe it would be best, to use the support form https://event.asrock.com/tsd.asp?ln=en Depending on language and country, the ticket is forwarded to support in USA, Taiwan, or The Netherlands
	Kind Regards

kraemer_sg Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 03 Apr 2022 Status: Offline Points: 80	Post Options Post Reply Quote kraemer_sg Report Post Thanks(0) Quote Reply Posted: 07 Apr 2022 at 1:03am
	I used the support and received a very similar answer.

kraemer_sg Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 03 Apr 2022 Status: Offline Points: 80	Post Options Post Reply Quote kraemer_sg Report Post Thanks(0) Quote Reply Posted: 07 Apr 2022 at 2:09am
	I took the mashine apart completely and put it back together: I found no obvious problems, but B1 is still broken...

Xaltar Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24653	Post Options Post Reply Quote Xaltar Report Post Thanks(0) Quote Reply Posted: 07 Apr 2022 at 1:10pm
	Have you checked for any bent/missing pins on the CPU? If even a single pin is missing it could easily account for the faulty/missing B channel. As Threadzipper mentioned, the IMC is on the CPU. Each channel will have it's own separate path from the CPU to the motherboard, if one of these is not connected then it explains the issue.


jotie Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 25 Nov 2023 Status: Offline Points: 30	Post Options Post Reply Quote jotie Report Post Thanks(0) Quote Reply Posted: 25 Nov 2023 at 5:03am
	Was it in the end a bad motherboard or the processor? I have a similar issue.
	Jo.