B650M PG Riptide No UEFI/POST |
Post Reply |
Author | |
Touch01
Newbie Joined: 09 Feb 2023 Location: Greece Status: Offline Points: 50 |
Post Options
Thanks(0)
Posted: 09 Feb 2023 at 2:28pm |
Hello, so, I recently upgraded to ryzen 7600x using the b650m pg riptide motherboard. During boot, I get no video output during the splash screen and no POST as a result. I tried booting into bios or at least get into the boot menu but no dice. The keyboard and mouse are responsive at that time.
I then took advantage of the flashback feature to update my bios, which did work (led was blinking at first, then it stopped blinking after some minutes, as per the guide thing). I still have the same problem. Updated every driver I could update, same issue. I am using HDMI (some people apparently had issues with displayport, but I'm not using any). I tried going from my GPU's (rtx 3070) port to the motherboard, still no output. Other than that, the PC will boot into Windows 11 and operate normally. I tried using the restart into uefi utility but I did not have success as there was still no video output. I tried restarting while holding shift, it didn't work. I am at my wit's end, what else can I try? |
|
Katana1074
Senior Member Joined: 31 Dec 2022 Status: Offline Points: 1310 |
Post Options
Thanks(0)
|
Have you tried disabling the igpu in the bios ?, is the bios updated to the latest 1.14.AS15 ?
|
|
Touch01
Newbie Joined: 09 Feb 2023 Location: Greece Status: Offline Points: 50 |
Post Options
Thanks(0)
|
Unless there is a way to disable the igpu with no video output, I can't do that. I guess I COULD do it blindly if I had a visual guide but it'd be risky.
I updated the bios to the latest version through the flashback. At least I think I did (I downloaded the latest version on the website and put that in the usb stick). |
|
Katana1074
Senior Member Joined: 31 Dec 2022 Status: Offline Points: 1310 |
Post Options
Thanks(0)
|
sorry wasn't thinking clearly there, I would clear the cmos using the 2 jumper pins on the motherboard...
latest bios was uploaded yesterday 08/02/23 |
|
CPU: RYZEN 7950x | Motherboard: ASROCK X670E TAICHI | GPU: MSI RTX4090 LIQUID X 24GB | RAM: FURY X DDR5 C40 | Hard Drive: INTEL OPTANE 900P 480GB,1 x SAMSUNG 980 PRO 2TB,2 X ADATA S8200X 2TB
|
|
Touch01
Newbie Joined: 09 Feb 2023 Location: Greece Status: Offline Points: 50 |
Post Options
Thanks(0)
|
Checked the version I downloaded, it was indeed the one from yesterday. (1.14 AS15) I tried both jumper reset and taking out the gpu. The end result was the same (it should be noted that I got no video output at all from the motherboard's hdmi port). |
|
Katana1074
Senior Member Joined: 31 Dec 2022 Status: Offline Points: 1310 |
Post Options
Thanks(1)
|
I cannot think of much else to try , other than a different cable, but as you say it works in windows, time to reach out to tech support there pretty good to be honest...
Regards |
|
CPU: RYZEN 7950x | Motherboard: ASROCK X670E TAICHI | GPU: MSI RTX4090 LIQUID X 24GB | RAM: FURY X DDR5 C40 | Hard Drive: INTEL OPTANE 900P 480GB,1 x SAMSUNG 980 PRO 2TB,2 X ADATA S8200X 2TB
|
|
cfandromeda
Newbie Joined: 04 Mar 2023 Location: denmark Status: Offline Points: 15 |
Post Options
Thanks(0)
|
i have the same problem just got the board freiday 2023/03/03 and no post at all i used the old ssd with win 10 x64 from old setup and just let it run and it log in to windows. but cant get in to bios.
|
|
johnxy
Groupie Joined: 23 Feb 2023 Status: Offline Points: 280 |
Post Options
Thanks(0)
|
Check this post below, you are not alone. All versions after 1.11 have the same problem, including "1.14.AS15", "1.18.AS04" and most recent "1.18".
https://forum.asrock.com/forum_posts.asp?TID=25520&title=b650m-pg-riptideno-post-after-reset-on-new-bios stay at 1.11 for now and report your issue to asrock using this link, https://event.asrock.com/tsd.asp |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |