X570 PG4 - BIOS update aftermath

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   After updating the BIOS I am unable to set my nvme drive to the default. I set uefi defaults after the flash (per the flash instructions), and I suspect this wiped something I needed configured. 

If I use F11, I can boot the drive without issue. I tried disabling compatibility mode, but that did not work. Any ideas what I am missing?

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
otherbarry Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 18 Jun 2023 Status: Offline Points: 35	Post Options Post Reply Quote otherbarry Report Post Thanks(0) Quote Reply Topic: X570 PG4 - BIOS update aftermath Posted: 18 Jun 2023 at 5:13am
	After updating the BIOS I am unable to set my nvme drive to the default. I set uefi defaults after the flash (per the flash instructions), and I suspect this wiped something I needed configured. If I use F11, I can boot the drive without issue. I tried disabling compatibility mode, but that did not work. Any ideas what I am missing?

otherbarry Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 18 Jun 2023 Status: Offline Points: 35	Post Options Post Reply Quote otherbarry Report Post Thanks(0) Quote Reply Posted: 18 Jun 2023 at 5:40am
	I got it I set back to defaults, saved and rebooted to bios Then found another menu, just below that allowed me to toggle the m2 drive as default saved and rebooted again, and it went directly to windows instead of looping back to the BIOS not sure why that worked this time, and not on my previous attempts, but hopefully it stays this way. Sorry for the clutter on your board. Hope this helps someone else.