![]() |
Z790 Steel Legend and TZ5RS G.SKILL |
Post Reply ![]() |
Author | |
gozer ![]() Newbie ![]() Joined: 16 Oct 2023 Status: Offline Points: 35 |
![]() ![]() ![]() ![]() ![]() Posted: 16 Oct 2023 at 6:03pm |
Good morning,
I'm struggling with this motherboard and I cannot get 7200 MHz speed out of the ram (as per specification). I chose this DDR5 G.Skill rams because they are certified for this motherboard, I have two sets of them, two Z790 Steel Legend (11.02 bios both) and two different Intel CPUs, an I7 13700KF and a 13600K. Keeping all the bios default value, the rams are getting recognized at a base clock of 4000 MHz, so I just select the xmp profile, save and reboot. Aida 64 ram test crashes in 3 seconds. I tried also to disable Asrock Timing Optimization and DRAM Frequency Optimization, but the only results I achieve is getting the rams running at 3600 MHz, even if I select 7200 from the xmp profile. After that, the only way to achieve a faster speed is to reset the cmos! Is there any setup I have to do? I don't understand how Asrock could have certified this rams, if they don't work at the specification clock. Thanks for any suggestion. |
|
![]() |
|
gozer ![]() Newbie ![]() Joined: 16 Oct 2023 Status: Offline Points: 35 |
![]() ![]() ![]() ![]() ![]() |
For a better reference; this is the ram set I'm referring to
https://www.gskill.com/product/165/374/1665644713/F5-7200J3445G16GX2-TZ5RS |
|
![]() |
|
Agent ![]() Newbie ![]() ![]() Joined: 03 Nov 2023 Location: Poland Status: Offline Points: 15 |
![]() ![]() ![]() ![]() ![]() |
Hi, I have DDR5 TZ5RS G.SKILL 6000Mhz 2x16GB and they works only in 3000Mhz, if I reset cmos they may works in 6000Mhz ?
|
|
![]() |
|
Zhorka ![]() Newbie ![]() Joined: 19 Dec 2023 Status: Offline Points: 30 |
![]() ![]() ![]() ![]() ![]() |
Hi Asrock,
I have similar issue that unstable when running XMP profile 1. A week ago I purchased B760M Steel Legend Wifi GSkill 7200 Trident Z5 RGB DDR5 F5-7200J3445G16GX2-TZ5RK CL34-45-45-115 1.40V 32GB (2x16GB) Every time i use XMP Profile 1, the system keep re-boot/crash when has run after 5-10 minutes. Before purchase I confirmed that Asrock B760M Steel Legend mentioned on their QVL of RAM that GSkill type is listed. Already BIOS update & try dozens of timings. I hope this is my lack of knowledge that could be missed something, please If any experience/ thoughts would kindly help. Regards, |
|
![]() |
|
Darkje ![]() Senior Member ![]() Joined: 30 Dec 2022 Status: Offline Points: 1200 |
![]() ![]() ![]() ![]() ![]() |
7200 is a pretty heavy overclock, you need a good CPU/IMC to be able to run that. Overclock is never guaranteed, at the gskill site it even warns: "Maximum memory speed and system stability depends on the capability of the motherboard & CPU"
Maybe you need to tweak some of the VDD_CPU or VDD_IMC voltages to get it steady, maybe your IMC is just not up to 7200 and you need to go one or even a few steps lower. |
|
![]() |
|
Zhorka ![]() Newbie ![]() Joined: 19 Dec 2023 Status: Offline Points: 30 |
![]() ![]() ![]() ![]() ![]() |
Ok i?™ll try it, but can you please explain how to tweak that vdd-things? Is that in BIOS menu CPU or DRAM option?
|
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |