B550M Steel Legend RGB Swapped on PCB & IO Shield

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I'm having an issue with my B550m Steel Legend, the LED color for my PCB and IO shield are swapped, and I can't find a way to fix this. I'm running Windows 11 currently. In polychrome the colors are usually correct, however Polychrome for some reason is mega laggy and buggy (if it even opens, it tends to crash, or slow my computer down very bad). It's been worse in Windows 11 than it was in 10. I did a fresh windows install, and that didn't help. 

I'm wanting to use OpenRGB, but both OpenRGB and Signal the colors for the PCB and IO shield are swapped. I tried reflashing the rgb controller via wICPFLASHADSBv2, and WriteFW.bat, but neither work to let me flash the controller properly. I'm on the latest bios, and latest version of Polychrome. Everything I've tried doesn't seem to fix the issue. I also tried swapping the ARGB header to see if both would be opposite in programs like Signal or OpenRGB, however the only the IO & PCB leds remain swapped, and the ARGB headers don't stay swapped. If I open Polychrome later, they are toggled as swapped, even though I turned them off. 

I've made sure not to have 2 rgb programs open at the same time.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Neinz Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 19 Oct 2023 Location: Earth Status: Offline Points: 20	Post Options Post Reply Quote Neinz Report Post Thanks(0) Quote Reply Topic: B550M Steel Legend RGB Swapped on PCB & IO Shield Posted: 19 Oct 2023 at 9:20am
	I'm having an issue with my B550m Steel Legend, the LED color for my PCB and IO shield are swapped, and I can't find a way to fix this. I'm running Windows 11 currently. In polychrome the colors are usually correct, however Polychrome for some reason is mega laggy and buggy (if it even opens, it tends to crash, or slow my computer down very bad). It's been worse in Windows 11 than it was in 10. I did a fresh windows install, and that didn't help. I'm wanting to use OpenRGB, but both OpenRGB and Signal the colors for the PCB and IO shield are swapped. I tried reflashing the rgb controller via wICPFLASHADSBv2, and WriteFW.bat, but neither work to let me flash the controller properly. I'm on the latest bios, and latest version of Polychrome. Everything I've tried doesn't seem to fix the issue. I also tried swapping the ARGB header to see if both would be opposite in programs like Signal or OpenRGB, however the only the IO & PCB leds remain swapped, and the ARGB headers don't stay swapped. If I open Polychrome later, they are toggled as swapped, even though I turned them off. I've made sure not to have 2 rgb programs open at the same time.