X670E Steel Legend Unstable with FW 2.00 |
Post Reply | Page 12> |
Author | |
mrbill
Groupie Joined: 07 Jan 2023 Status: Offline Points: 560 |
Post Options
Thanks(0)
Posted: 09 Nov 2023 at 10:28am |
Just updated firmware to 2.00 and Windows is lucky to get 5 minutes of runtime before crashing. Anyone else experiencing the same issue? I rolled back to FW 1.30 AS02 and stability returned.
|
|
ASRock X670E Steel Legend (ABA159EAF581)
AMD Ryzen 9 7900X 32GB (2x16GB) G.Skill F5-5200J4040A16GX2-RS5K WD SN570 2TB MSI NVIDIA GeForce RTX 3080 Ti Win 11 Pro |
|
SPARC0
Newbie Joined: 09 Nov 2023 Location: Bulgaria Status: Offline Points: 70 |
Post Options
Thanks(0)
|
I have problem booting EXPO 2 ram on 6000 .... Asrock never again ...
|
|
Jay001
Newbie Joined: 10 Nov 2023 Status: Offline Points: 45 |
Post Options
Thanks(0)
|
I updated it and it worked fine for 1 day but this morning it would not recognize my external GPU. I had to flash 1.28 to get it to boot from the external GPU. I think they did not test it enough before releasing it to the public. I would wait for a new stable release.
|
|
LastFridayNight
Newbie Joined: 27 Jun 2022 Location: Zuerich Status: Offline Points: 165 |
Post Options
Thanks(0)
|
I updated my bios to version 2.0 today and the pc now suddenly reboots in the bios window without any input nor exit command, sometimes several times in a sequence.
I can't start it, pc with X670E steel legend amd 79503dx, since assembly 5 months ago without problems, couldn't get into os anymore, testen ubuntu and debian too, didn't work at all, once os installed on reboot it doesn't recognize the boot efi anymore, all possible repairs and restores don't work, that's why I've already upgraded 4 ssd one after another, with all 4 exactly the same failures always the same result, at a computer shop the hardware was fully checked, everything is 100% ok and compatible I noticed that the new bios version doesn't allow to select AMD CPU fTPM, wonder if it's possible to boot into windows. I'm now thinking about buying another mb |
|
LastNightFriday sending you a greet
|
|
mrbill
Groupie Joined: 07 Jan 2023 Status: Offline Points: 560 |
Post Options
Thanks(0)
|
After the failure with 2.00 firmware, I rolled back to 1.30.AS02. Then I update to 1.30.AS05 which is stable but I lost the front mic. Seems I can't update FW without encountering problems.
|
|
ASRock X670E Steel Legend (ABA159EAF581)
AMD Ryzen 9 7900X 32GB (2x16GB) G.Skill F5-5200J4040A16GX2-RS5K WD SN570 2TB MSI NVIDIA GeForce RTX 3080 Ti Win 11 Pro |
|
M440
Senior Member Joined: 12 Jul 2023 Status: Offline Points: 3145 |
Post Options
Thanks(0)
|
for me upping the DDR5 memory voltage (by 0.2v) and SOC voltage fixed any problems, but i dont use windows
|
|
asrock b650m/hdv.m2, ryzen 7700x@85watt
|
|
Flode
Newbie Joined: 09 Dec 2017 Location: Germany Status: Offline Points: 110 |
Post Options
Thanks(0)
|
Very similar problems with my asrock x670 pg riptide after updating to bios 2.00.
Board suddenly very unstable, also ram boot problems which i havent encountered with bios versions before. New bios 2.02 realeased, i will try it and also try your tip to increase ram voltage a litlle bit. Will report about progress, best regards |
|
mrbill
Groupie Joined: 07 Jan 2023 Status: Offline Points: 560 |
Post Options
Thanks(0)
|
Please let us know if 2.02 has solved the problem and if you had to increase ram voltage which I'm very reluctant to do. |
|
ASRock X670E Steel Legend (ABA159EAF581)
AMD Ryzen 9 7900X 32GB (2x16GB) G.Skill F5-5200J4040A16GX2-RS5K WD SN570 2TB MSI NVIDIA GeForce RTX 3080 Ti Win 11 Pro |
|
Flode
Newbie Joined: 09 Dec 2017 Location: Germany Status: Offline Points: 110 |
Post Options
Thanks(1)
|
Hello with bios 2.02 everything is working again. System is stable again with xmp Setting. I had no need to increase any voltages. Also curve editor and pbo are fine again. Thanks for the fixes Asrock Tesm
|
|
LastFridayNight
Newbie Joined: 27 Jun 2022 Location: Zuerich Status: Offline Points: 165 |
Post Options
Thanks(0)
|
I now updated my new purchased Steel Legend ver. 1.21 to bios 2.02 and it was working good, cause after the bios update restart the pc got stuck in black screen and I then did a cmos reset and took out 3 ram modules at the same time and the pc started without any problems. originally I had bought 4x32gb ram modules, 2 pairs in pair, corsair CMK64GX5M2B6000C40 ver 4.43.02 listed in the memory qvl. that seems to not be working at all. also as soon as I activated the sata raid in the bios I could not start it again, reset cmos again and load default uefi setting, now it runs on 32GB ram ;-(
|
|
LastNightFriday sending you a greet
|
|
Post Reply | Page 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |