Steel legend Z790 Wifi - Thunderbolt 4 problems

I have an AsRock Steel Legend Z790 Wifi, brand new, and installed an AsRock TB4 AIC into PCIE2 per the instructions. I am trying to connect this to a Presonus Quantum 2626 TB3 audio interface. The TB appears to be working, when I launch the Intel TB Control center, it shows the Quantum as a device, but will not allow me to approve it within the control center, it does say "not connected". In the about section it says that PCIE Tunneling is disabled, and I'm assuming this is my issue, however I looked all through the BIOS and didn't find this setting, but I did enable TB in the BIOS. I also tried 2 different cables with the same results. According to Presonus, they say that this device will work with Intel/TB4 computers. My question is, should PCI tunneling be enabled, and where do I find that? Any help is appreciated, I did submit a support ticket to ASRock, but haven't heard back on it.

Thanks,
Aaron

BIOS Ver: 5.02

Hey Starfield,

I think I may have somewhat of a solution to the issues. You're probably on Win 11, make sure all BIOS, GPU, Audio, and GPU updates are done from the site. Also, Win 11 updates, and that your TB setting in BIOS in enabled. I left the other 3 option disabled but that might be for the issue I still have. If all that is done, I believe this is a Window security issue.

My light on the Quantum 2626 was just red, so if you try this an reboot after each change it may come up blue for you.

Go to Windows Security -> Dev ice security -> Core Isolation. Disable memory integrity. Might have to reboot

Go back in and disable Microsoft Vulnerability Driver block list. Reboot with the Quantum on.

My light is blue and the Thunderbolt controller is showing the device and showing connected. Universal Control now sees it and so does Studio One.


I did some audio tests through it yesterday and worked fine, but haven't tested any recording yet.

My issue that I'm having now is, that it only works with the Quantum is started prior to the computer, so if I turn it off and back on the light is red. So I'm still trying to figure that out.

Maybe we can work on this together to try and get the quantum humming with our new machines. Keep in touch.

Aaron

Hey Starfield,

See my replies to your issue, I think I figured it out.

Aaron