B450 Steel Legend and Crucial M.2 SSD

Hello,

After installing a new Crucial NVMe SSD the PC freezes in the early boot process (while displaying "F2 for UEFI/BIOS, F11 Boot Menu" etc)
After shut down and removing the SSD from the PC everything is OK again.

Mainboard: Asrock B450 Steel Legend
CPU: Ryzen 7 2700 (Pinnacle Ridge)
SSD: CT2000P3SSD8 "Crucial P3 PCIe 3.0 NVMe 2280 M.2 SSD"

I installed the SSD in Socket M2_1 (PCIE4 is not occupied).

My current BIOS version is 2.60
All later BIOS versions except 4.60 say
"*ASRock do NOT recommend updating this BIOS if you are going to use Pinnacle, Raven or Summit Ridge CPU on your system."

Crucial claims compatibility
https://www.crucial.de/compatible-upgrade-for/asrock/b450-steel-legend#ssd

Any solutions?
Does BIOS 4.60 change anything regarding this problem?

Greets

Thank you for the answer.

Can it still be used as boot disk if using a PCI-E-to-M.2 Adapter ?
I mean to use it for some OS, not just for data.

I got an M.2-NVMe-SSD-PCIe-Adapter for PCIe x4 and installed it on the mainboard at PCIE4 (x4).

But the same problem, the PC freezes at beginning.
A red LED on the adapter lights up at booting.

Any ideas?

But what do the Technical Notes mean then?
"Due to the mismatch Pin define, the onboard M.2 slot is not compatible with following M.2 SSDs. To use the following M.2, please use the M.2 to PCIe adapter."

I wonder if there is some "pin mismatch", why should it then work with PCIe? This could be the same mismatch.

kerberos_20 wrote: (...) then there is with small letters storage device compatibility link which points to this tech notes: https://www.asrock.com/support/qa/Technical%20NNotes%20-%20Storage%20Device%20Compatibility.pdf which states that crucial P3 is not compatible unless you use pci-e to m2 adapter

In the meantime the tech notes have been edited. Even if you use a PCIe to M.2 adapter now the Crucial P3 is NOT listed as compatible anymore.

Hello , I have the same problem, does the pcie adaptee work ?