Z170 extreme4 dr.debug 04 |
Post Reply | Page <1234> |
Author | |
HappyMan
Newbie Joined: 09 Aug 2016 Status: Offline Points: 19 |
Post Options
Thanks(0)
|
CPU is i5 6400
Second bios version is 3.20 (a have updatetd it too) On second bios chip, the problem still remains. On both BIOS chips I have stickers with 1.00 or 1.10 numbers(exactly can say only when will be at home) |
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
I'm getting thin on options, but .......
Directly under the SATA ports is where your two BIOS chipa and the BIOS Select switch reside. Over the two BIOS chips is a sticker over each. 1. What CPU is it you're using? 2. What is printed on both stickers covering the BIOS chips? In asking those two ??'s I'm wanting to verify that your B BIOS(you have two, w/one, the B chip, being a backup) supports your processor BEFORE switching over to it. |
|
HappyMan
Newbie Joined: 09 Aug 2016 Status: Offline Points: 19 |
Post Options
Thanks(0)
|
Thanks. I find menu item, but after disabling 04 code freez still left.
CMOS clear don't give any resulth. i noticed that 04 code is appears immediately after code 56. When system at stock frequency all works fine. I have 04 code on restart and shutdown without freezes. But when i try to overclock CPU i have 04 code freez randomly. |
|
Boru
Newbie Joined: 10 Aug 2016 Location: Poland Status: Offline Points: 4 |
Post Options
Thanks(0)
|
DRAM Configuration/ Advanced Setting after ODT.
Edited by Boru - 10 Aug 2016 at 8:37pm |
|
HappyMan
Newbie Joined: 09 Aug 2016 Status: Offline Points: 19 |
Post Options
Thanks(0)
|
There is my DRAM setting.
https://i.imgsafe.org/b172476a62.jpeg https://i.imgsafe.org/b1744d6afa.jpeg I don?™t see MRC Fast Boot menu item. |
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
1st, let's look at ........
Use the Clear CMOS Switch(CLRCBTN) to clear your BIOS if you've been in there mucking around what with attempting different settings please. Probably should do this anyway. Yea, do. Unplug the PSU from the wall > wait 1min > press the cases Power button down for 15secs > finally hold the CLRCBTN at the back I/O panel in for 5secs. Then reapply power and report back the/any result. Also try: BIOS > OC Tweaker > DRAM Configuration > MRC Fast Boot - Set to Disabled and report back please. |
|
HappyMan
Newbie Joined: 09 Aug 2016 Status: Offline Points: 19 |
Post Options
Thanks(0)
|
TEAM DARK DDR4 3200 CL16-16-16-36 1.35V 4GB x 2 TDKED48G3200HC16ADC01
XMP profile set 3200 CL16-16-16-36 1.35V but I try to use default freq. 2133 and auto timings (same result) Memory passed all tests Edited by HappyMan - 10 Aug 2016 at 3:18pm |
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
IMHO this may be one of two things at issue.
First, will you provide the Make and Part Number(s) of the memory kit(s) you're using? |
|
HappyMan
Newbie Joined: 09 Aug 2016 Status: Offline Points: 19 |
Post Options
Thanks(0)
|
- 04 then 00 at power down, when power up 00 and 19 and so on.
- shutting it completely (С-states is OFF) - latest 3.40 BIOS.
|
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
I have 3 for ya
1. 04 ? Or 04 at power down and 40 at resume? 2. Are you actually putting the computer into a Sleep state, or shutting it completely down? 3. By chance is the boards BIOS flashed to an early release? |
|
Post Reply | Page <1234> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |