headless ASRock A520M-HVS based system |
Post Reply |
Author | |
kwieszcz
Newbie Joined: 22 Mar 2024 Status: Offline Points: 150 |
Post Options
Thanks(1)
Posted: 22 Mar 2024 at 6:23am |
Hello,
I would like to know if the motherboard ASRock A520M-HVS can boot without any GPU or APU? My goal is to run a server with ryzen 3 4100 that will be accessed only via SSH. Best, Kamil |
|
eccential
Senior Member Joined: 10 Oct 2022 Location: Nevada Status: Offline Points: 4825 |
Post Options
Thanks(0)
|
I would not recommend Ryzen 3 4100 for server use, if you want to run ECC memory.
Only PRO variants of APU-based processors support ECC, and 4100 is Renoir based. If you want an APU, look for Ryzen 3 PRO 4350G and the likes (4650G, 4750G), which are Zen2. For Zen3 APU, 5650G, 5750G, etc. If you don't need iGPU, go for standard CPUs, rather than APU-based chips. Ryzen 3 3100/3300X (Matisse) would be the closest equivalent of Ryzen 3 4100 (Renoir). Note 5700X (Vermeer) will support ECC memory, but not 5700 (Cezanne). When in doubt, look at techpowerup database and look at the code name. For 24/7 server use, PRO-APU can be better, because they have lower idle power consumption (monolithic). My current little server is Ryzen 3 PRO 4350G I bought from Amazon. Some Korean vendor boxed them and sold them through US Amazon. Fantastic little server chip with full ECC memory (unbuffered only, of course) support. |
|
charlesmertin72
Newbie Joined: 24 Mar 2024 Location: Austin Status: Offline Points: 15 |
Post Options
Thanks(0)
|
Yes, the ASRock A520M-HVS motherboard supports headless operation, meaning it can boot without a GPU or APU. You can run your server with the https://discordfontsgenerator.com/ Ryzen 3 4100 and access it solely via SSH for your intended setup.
|
|
kwieszcz
Newbie Joined: 22 Mar 2024 Status: Offline Points: 150 |
Post Options
Thanks(0)
|
I chose the 4100 because I read reports of its low idle power consumption and I don't need ECC. Do you know idle power consumption for your server? I finally bought b450m-hdv r4.0 + ryzen 3 4100 for my debian headless server. Although I've read a few statements that the mobo boots without gpu, the one I bought fails to boot without gpu and it draws 23W at idle. I am thinking of replacing my mobo with A520M-HVS to get rid of the gpu (hd5450) so I can lower the idle wattage further.
|
|
eccential
Senior Member Joined: 10 Oct 2022 Location: Nevada Status: Offline Points: 4825 |
Post Options
Thanks(0)
|
If you don't need ECC memory support, the non-PRO thing wouldn't matter.
All of 4100, 4300G, 4350G, and many others are physically the same chip (Renoir, monolithic), with various portions of the chip disabled. Fully enabled Renoir (4750G) has 4-core CCX + 4-core CCX + 8CU Vega iGPU. Each CCX has 4MB L3, so the total L3 is 8MB. R3-PRO-4350G and R3-4300G are almost identical, with one of the CCX's completely disabled. So they're both 4-core CCX + 3CU Vega, with just 4MB L3, because the other CCX is completely disabled. R3-4100 is a different beast, with both CCX's enabled, but with 2-cores disabled in each. So it's 2-core CCX + 2-core CCX + 0CU Vega (disabled). Total L3 is 4MB+4MB=8MB. https://www.techpowerup.com/cpu-specs/ryzen-3-4100.c2757 Although you get twice the L3 in 4100, each half is only accessible directly by 2-cores, and any sharing means they have to go through the fabric logic. And the fact that both CCX's are powered ON means it will have slightly worse idle power consumption, compared to 4350G/4300G. On the other hand, since 4100 has the iGPU completely disabled, it might consume slightly less power there. I've no idea how the total compares. I imagine it's pretty close. So I wouldn't think 4100 consumes any more power than 4350G/4300G. My R3-PRO-4350G system looks like: X470 Gaming-ITX/ac Fata1ity Two sticks of Micron 3200MT/s CL22 16GB ECC UDIMMs Two Samsung NVMe 970Pro (512GB + 1TB). One on PCIe adapter Extra Intel i210 on WiFi m.2 slot, so two GbE. Mini-Box's M3-ATX DC-DC Power Supply One 120mm fan Running FreeBSD It idles at about 15W. Note this is the actual DC load, not mains power. It can run off my solar+battery setup. Is that 23W measured at wall? What kind of power supply? At this kind of low-power levels, most standard power supplies are relatively inefficient. I can't imagine idling HD5450 consuming that much power at idle, although a few watts is still quite a bit in percentage terms. Instead of buying another motherboard, can't you just buy a R3-4300G? Or is that more expensive? I've no experience with running any AM4 board without a GPU (iGPU/dGPU). All of my systems have at least the iGPU. |
|
kwieszcz
Newbie Joined: 22 Mar 2024 Status: Offline Points: 150 |
Post Options
Thanks(0)
|
It's 23W at the wall. Without gpu it measures 16W though it doesn't boot.
I can have the mobo replaced basically for free. Replacing cpu is more convenient though and I've been reading some nice power consumption reports on 5600g. If I can get 5600g at a good price I might go for it. |
|
kwieszcz
Newbie Joined: 22 Mar 2024 Status: Offline Points: 150 |
Post Options
Thanks(0)
|
I am using LC POWER LC420 350W PSU.
|
|
eccential
Senior Member Joined: 10 Oct 2022 Location: Nevada Status: Offline Points: 4825 |
Post Options
Thanks(0)
|
With these super low power consumption builds, regular power supplies aren't the best, because their efficiencies aren't great at extremely low power levels, like less than 10% of the ratings. That's why I use these tiny power supplies. For example, my daily PC is Ryzen 5 PRO 4650G with another Mini-Box M3-ATX:
https://www.mini-box.com/M3-ATX-DC-DC-ATX-Automotive-Computer-car-PC-Power-Supply And I power it using a high-quality power brick (Meanwell GST90A15-P1M 90W 15V 6A). 5600G should behave similar to 4650G in idle, but it would be way faster under load, because it's Zen3 with 2x the unified L3 (16MB). I would've bought a 5650G or 5750G if I could find one, but I couldn't find a PRO version to buy. Next CPU I buy will be AM5, so I'm not looking at any AM4 CPUs anymore. |
|
kwieszcz
Newbie Joined: 22 Mar 2024 Status: Offline Points: 150 |
Post Options
Thanks(1)
|
I bought a 5700G. The idle power consumption at the wall went down to 17W. 108W under full cpu load.
For information, the whole system is: - ryzen 7 5700G - b450m-hdv r4.0 (bios 7.40) - F4-3200C16D-32GIS - SAMSUNG PM981 256GB M.2 - LC-Power 350W |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |