|
asrock fatal1ty x99x killer bios |
Post Reply 
|
| Author | |
Wax 
Newbie 
Joined: 10 Jan 2017 Status: Offline Points: 4 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: asrock fatal1ty x99x killer biosPosted: 10 Jan 2017 at 7:13pm |
|
Hello a have this motherboard
I have a problem starting my 6800k. My memory DDR4 2666MHz CL15 Kingston HyperX Fury Black Series 4X4. After launching an error code "bd" the problem is that it does not load the BIOS. He found that akutualizace bios should help But I do not know if you can do it outside bios Thank for any help and idea |
|
 |
|
|
parsec
Moderator Group 
Joined: 04 May 2015 Location: USA Status: Offline Points: 4996 |
Post Options
Thanks(1)
Quote Reply
Posted: 10 Jan 2017 at 10:07pm |
We need the full model number of your memory to check for compatibility. Do you know which UEFI/BIOS version you have in your board? The BIOS chips have a sticker on them, they are close to the board's battery, on the right side of the battery. You must have at least BIOS version 3.00 to work with a Broadwell-E i7-6800K. Your memory must be in the A1, B1, C1, and D1 slots, when using four DIMMs. You can try clearing the BIOS/CMOS. Is this the first time you are starting your board? |
|
|
|
|
|
|
Wax
Newbie
Joined: 10 Jan 2017 Status: Offline Points: 4 |
Post Options
Thanks(0)
Quote Reply
Posted: 11 Jan 2017 at 12:29am |
|
thank you for fast feedback
this is my first start board my memory are: hx426c15fbk4 / 16 are already installed A1, B1, C1, D1 (also tried only one module) I tried resetting the CMOS and clean for several times bios A and B. And my bios: P2.10 bios B is the same I can buy another chip or update without having to enter the bios? |
|
|
|
|
Xaltar
Moderator Group
Joined: 16 May 2015 Location: Europe Status: Offline Points: 26813 |
Post Options
Thanks(0)
Quote Reply
Posted: 11 Jan 2017 at 2:57am |
|
Contact ASRock Tech support here:
Make sure to detail your issue. This is a common issue and they are always very helpful with it.
|
|
|
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
Wax wrote: