onboard HDMI not working |
Post Reply | Page 12> |
Author | |
kelly
Newbie Joined: 22 Jan 2017 Status: Offline Points: 11 |
Post Options
Thanks(0)
Posted: 05 Feb 2017 at 2:25am |
with Ascrock H170M Pro4 v7.00 bios - HDMI and ultra fast boot not worked, but via D-Sub ok, and i even install win 10. but after update bios to v7.10 - hung at POST - view Asrock logo and info about which button press to.. all. can not enter BIOS or continue boot. agree now think root of problem in EVO 960. but this is specific bad item, and another EVO 960 can work well. or until motherboard at all not fully support this EVO 960 and need look for other models. I would like to clearly understand the situation and not to buy expensive items on guess again (suddenly will not work again) and yes, i never use external graphics cards in own builds but always Processor Graphics. for me important fast disk and power processor, but graphics not important. this not for gaming and processor onboard graphics more than enough for me Edited by kelly - 05 Feb 2017 at 2:45am |
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24053 |
Post Options
Thanks(0)
|
So the system won't post at all on with the drive installed on the MSI board? If this is the case then the issue is likely coming from the drive rather than the board itself, it sounds like it is hogging resources typically assigned to the iGPU. I am not sure but a BIOS fix may help, that or a firmware update for the drive itself. I would contact Samsung (if you haven't already) and ASRock Tech support directly and inquire. This is a very curious issue. Maybe Samsung assumed anyone using it's pro series M.2 drives would be using a dedicated GPU and failed to properly test on iGPUs? Whatever the case, I am sure there is a solution.
ASRock Tech Support: http://event.asrock.com/tsd.asp
|
|
|
|
kelly
Newbie Joined: 22 Jan 2017 Status: Offline Points: 11 |
Post Options
Thanks(0)
|
yes, do exactly this.
i think that not only i have this issue - for example this - also no video (and here no D-Sub port) Edited by kelly - 05 Feb 2017 at 1:17am |
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
But you are using the included M.2 standoff that is FIRST screwed into the motherboard that the M.2 drive is then, and only then, screwed/fastened to the standoff. Not directly to the motherboard? Edited by wardog - 04 Feb 2017 at 11:57pm |
|
kelly
Newbie Joined: 22 Jan 2017 Status: Offline Points: 11 |
Post Options
Thanks(0)
|
yes, motherboard (both) have only one Ultra M.2 slot and physically impossible install SSD incorrect (wrong orientation, etc). for summarize:
1) i install SSD to H170M?PRO4 (bios version 7.00 from the box) and connect monitor with HDMI cable - got black screen and no signal for monitor 2) i replace HDMI to D-SUB (VGA) cable (nothing touch more) - and all begin work 3) i successfully install windows 10 (x64 1607) on this SSD (no other hard drives) - all ok (and this prove that SSD correct physically installed in M.2 slot). reboot several time - ok. (UEFI install) 4) i set Ultra Fast Boot in bios - after this system not load - in bios i not view SSD - M.2 slot shown as "empty" 5) i return to normal/Fast Boot - system (windows) loaded ok 6) i download latest 7.10 bios version for update bios under Windows® - run exe from Windows 7) after update i verify that bios version become 7.10 and system (windows) ONCE booted ok. 8) after reboot - i can not boot more, even can not enter BIOS - system hung at Asrock splash screen 9) clear CMOS not help 10) only remove SSD from M.2 helped. install again hung. 11) after all this insert this SSD for test in MSI B250M PRO-VH motherboard (bios 1.0 from the box) 12) no video signal at all - by HDMI and by D-Sub here. system off when press power button 13) on this motherboard exist debug leds - and it show that GPU init fail (in both case i use IGD - from i7) 14) without SSD in M.2 video signal work ok. install M.2 back - again GPU fail led fire and black screen 15) remove SSD and update bios to latest 1.2 version with flash. bios updated successfully 16) after insert SSD again to M.2 - again GPU init fail. but now power button already not worked - only unplug the power-cord help off |
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
kelly
Newbie Joined: 22 Jan 2017 Status: Offline Points: 11 |
Post Options
Thanks(0)
|
all problem was in SAMSUNG 960 EVO NVMe M.2 - when it inserted in M.2 slot - HDMI not working (only D-Sub) I test this SSD on another motherboard - MSI B250M PRO-VH but here both VGA and HDMI not worked, when M.2 inserted. without it work (this with latest bios and set use IGD video). so look like with SAMSUNG 960 EVO NVMe M.2 partially or fully GPU initialize fail. are this is motherboards or SSD issue ? this can be fixed ?
|
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24053 |
Post Options
Thanks(0)
|
Yes, just to rule out other components. The last thing you want is to RMA a part and have it turn out to be the wrong one.
|
|
|
|
kelly
Newbie Joined: 22 Jan 2017 Status: Offline Points: 11 |
Post Options
Thanks(0)
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24053 |
Post Options
Thanks(0)
|
Try disconnecting everything from the board other than power, RAM and CPU and see if you can enter the UEFI. All you want connected is the keyboard, mouse and display with regards to peripherals. No SATA cables, drives or any other devices should be connected internally. This will isolate any potential problems to the Motherboard, RAM and PSU.
|
|
|
|
Post Reply | Page 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |