Freezing and stuck asrock FM2A68M-HD+ win 10 |
Post Reply | Page 123> |
Author | |
Xulingxuling23
Newbie Joined: 07 Feb 2017 Location: Indonesia Status: Offline Points: 25 |
Post Options
Thanks(0)
Posted: 07 Feb 2017 at 12:17am |
Dear all,
I have problem with my asrock Proc: amd a10 7860K Vga: saphire r7 250 2gb ddr5 Ram: 2pcs:patriot 4gb ddr 3 1600mhz Os: win 10 64 bit My problem is when i play game dota 2 the pc is freezing and need to restart. I already disabled c6 and integrated vga on board. What i must to do? All the oc i set auto and enabled. Regards, Xuling |
|
Xulingxuling23
Newbie Joined: 07 Feb 2017 Location: Indonesia Status: Offline Points: 25 |
Post Options
Thanks(0)
|
Up
|
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
Sorry Xuling. I missed your post. For testing, remove the OC and reply if at stock MHz it runs w/o issue. |
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
Xulingxuling23
Newbie Joined: 07 Feb 2017 Location: Indonesia Status: Offline Points: 25 |
Post Options
Thanks(0)
|
My psu is 450 watt its already a bundling packet with power logic cpu case
Wait i check my bios |
|
Xulingxuling23
Newbie Joined: 07 Feb 2017 Location: Indonesia Status: Offline Points: 25 |
Post Options
Thanks(0)
|
Xulingxuling23
Newbie Joined: 07 Feb 2017 Location: Indonesia Status: Offline Points: 25 |
Post Options
Thanks(0)
|
I think i already use asrock appshop and internet flash , the software said your firmware is up to date
|
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
Oh Lord. You need a new(er) and bigger PSU. 10a on the lone 12v rail ......Not good.
This PSU pictured is of an older design that favored the +3.3v and +5v rails. Think Pentium 4 based motherboards. Current motherboards/graphic cards now pull more off the +12v rail. With the peripherals now using the +3.3v and +5v rails
|
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24713 |
Post Options
Thanks(0)
|
I am inclined to agree with Wardog about the PSU being under powered. 450w should be enough for a system like yours but that PSU is old and from a time when loads were balanced differently as Wardog noted. 10A on the 12v rail is something you might see on a modern 250w PSU today not on a 450w model.
If you want to test to find out if it is the cause of your issue you can download and install 3d Mark Firestrike and run it. If your system freezes/crashes with that too then the PSU is definitely the problem. If it does not then it could be driver related. I strongly suspect the PSU but based on your previous comments you are on a tight budget so lets rule out other possibilities before you go out and get a better one.
|
|
|
|
Post Reply | Page 123> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |