![]() |
RGB LED Issues |
Post Reply ![]() |
Page <1234 10> |
Author | |
niiou ![]() Newbie ![]() Joined: 30 Dec 2019 Status: Offline Points: 2 |
![]() ![]() ![]() ![]() ![]() |
I'm running ASRock Polychrome RGB ver:2.0.38 with nu51_3.04 flash. I've also made sure the cables I plugged in were in right configuration according to the x570 creator manual. I also tried playing around to see if flipping it will magically fix anything but I've had no luck. |
|
![]() |
|
gizmic ![]() Groupie ![]() ![]() Joined: 13 Jun 2018 Location: Hong Kong Status: Offline Points: 677 |
![]() ![]() ![]() ![]() ![]() |
if it helps its 1.0.60 firmware 2.10
|
|
![]() |
|
![]() |
|
SAJ ![]() Newbie ![]() Joined: 20 Jun 2019 Status: Offline Points: 133 |
![]() ![]() ![]() ![]() ![]() |
i know. i am asking because in yor version your chorma connect tab is showing
|
|
![]() |
|
gizmic ![]() Groupie ![]() ![]() Joined: 13 Jun 2018 Location: Hong Kong Status: Offline Points: 677 |
![]() ![]() ![]() ![]() ![]() |
we surely have different polychrome versions different board
|
|
![]() |
|
![]() |
|
SAJ ![]() Newbie ![]() Joined: 20 Jun 2019 Status: Offline Points: 133 |
![]() ![]() ![]() ![]() ![]() |
which polychrome version you using?
|
|
![]() |
|
gizmic ![]() Groupie ![]() ![]() Joined: 13 Jun 2018 Location: Hong Kong Status: Offline Points: 677 |
![]() ![]() ![]() ![]() ![]() |
with wrong colours its either wrong flash or reversed plug
|
|
![]() |
|
![]() |
|
niiou ![]() Newbie ![]() Joined: 30 Dec 2019 Status: Offline Points: 2 |
![]() ![]() ![]() ![]() ![]() |
Motherboard: Asrock X570 Creator
BIOS: 2.00 CPU: AMD Ryzen 9 3950X RAM: G-Skill TridentZ Neo RGB CL16 3600 2x16GB OS: Windows 10 Pro (1909) 64Bit Running into similar issues. My AMD RGB Fan header is stuck on green whenever trying to display a color. Then my RGB Fan Header (regular one)is always displaying blue, even if I set the color to "black". I only care about fixing at least one header at the least. I've troubleshooted for the past 3 hours and even flashed my bios and nothing helps. I made sure all orientations were correct, tried different cables, tested the fans on different board, even tried even loading the 2.10 and the 1.10 firmware and software. The rgb ram works just fine and the aRgb Header does too but the 4 pins ones wont budge at all. its super frustrating to have these problems still in 2020 with a $500 motherboard. Everything is set to the same color in the software here but you can see how these issues mess up the colors. ![]() pls help |
|
![]() |
|
gizmic ![]() Groupie ![]() ![]() Joined: 13 Jun 2018 Location: Hong Kong Status: Offline Points: 677 |
![]() ![]() ![]() ![]() ![]() |
![]() |
|
![]() |
|
![]() |
|
mm11 ![]() Newbie ![]() Joined: 24 Sep 2019 Status: Offline Points: 21 |
![]() ![]() ![]() ![]() ![]() |
Hey man,
I know this thread is pretty old but... I recently built my first pc. I have the Asrock x570m pro4. I did what you mentioned but with the newer files for the flash and im still not getting a change in fan color when using the polychrome sync. Any suggestions? |
|
![]() |
|
Relihschneider ![]() Newbie ![]() ![]() Joined: 16 Aug 2019 Location: Argentina Status: Offline Points: 4 |
![]() ![]() ![]() ![]() ![]() |
Sorry for a lot of post, i dont know how edit
i confirm, i will work with Asrock RGB led v1.0.12 i found it in the Motherboard system CD from my Asrock X370 Taichi in the utility folder Thanks!!! |
|
![]() |
Post Reply ![]() |
Page <1234 10> |
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |