taichi bios v2.40 (agesa 1006) is out, feedback

Awesome, good luck 

its on v2.40

first thoughts ............

i opted to reset all bios back to defaults before flashing (good advice guys)
may i say when performing the actual flashing it really took a very long time .....considerably longer than usual bios flashing were talking maybe going on for nearly 4-5 mins
allthough when finished the restart was much fasting than previous 30 second long panicy delays were used to after reset cmos etc
i then entered bios directly checked whats changed etc left it all at default and rebooted into bios again (ive read to do this with ryzen)
save an exited again and was going to let it boot direct to windows
now it performed its own double boot here
e.g. it looked like it cleared bios and was ready to jump to windows log in but rebooted itself once more (i let it do its thing) and second time it went into windows

AND HERE I AM ..................STOCK !

off to play with bios now and test the usual overclock is stable eg 3.9 ghz
i will probably quickly test the ram first (it hasnt been an issue at all since first bios flash day one on version 1.6) ram is gskill f4-3200c15d-16gtz

Edited by datonyb - 09 Jun 2017 at 7:35pm