x399 Taichi with TR wont install Server 2016 |
Post Reply | Page <1 234 |
Author | |
MisterJ
Senior Member Joined: 19 Apr 2017 Status: Offline Points: 1097 |
Post Options
Thanks(0)
|
tombmedia, so you are not getting "The installation failed in the SAFE_OS phase with an error during BOOT operation" error that kwagenknight is getting? Please tell us the details of your setup. Please open the BIOS and hit F9 to Load UEFI Defaults. How did you create your install USB? Have you tried booting and installing from it on another system? Can you burn a DVD and try that? Are you using USB-2 or 3 port? Maybe there are not any USB-2 ports on TR. Where did you get the Server 2016 install code? Did you modify it at all? Please tell us as much as you can. Good luck and enjoy, John.
|
|
Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD
|
|
tombmedia
Newbie Joined: 01 Sep 2017 Status: Offline Points: 14 |
Post Options
Thanks(0)
|
I get an initial boot off the thumbdrive, then a grey screen with the "Loading Files" message and a white progressbar which loads twice and then flips to either a windows logo or the asrock logo (depending on my approach) and from there it just hangs. I no longer see any drive activity nor does it read anymore from the usb drive. I've left it for days and no activity.
Other weird thing is in that state I can hit the power button and it just turns right off, so it doesn't look like the setup os is loading at all. MB post codes are off at this point as it has booted something but not enough to continue.
|
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(1)
|
What is the install stating/showing. and where during the install? |
|
tombmedia
Newbie Joined: 01 Sep 2017 Status: Offline Points: 14 |
Post Options
Thanks(0)
|
I have the same problem with the X399 Gaming Pro. I can get WIndows 10, Server 2012R2 installed and booting but not server 2016. using latest 1.3 bios, removed all the memory sticks, tried again one by one, no issues with the memory just with booting off usb media. used rufus, used the windows 7 usb boot tool, fat32 boot partition with ntfs fs, fat32 partition with the files split over 2 partitions. nada.
The ram I am using is CMK64GX4M8A2400C14 ver:5.30, bios is lates installed via flash and not windows.
Edited by tombmedia - 01 Sep 2017 at 11:46am |
|
MisterJ
Senior Member Joined: 19 Apr 2017 Status: Offline Points: 1097 |
Post Options
Thanks(0)
|
Thanks, kwagenknight, but please provide more details including exact memory model (qualified?) and BIOS version. Make sure you are running the latest BIOS (1.30) and use the Install Flash (BIOS) not the Windows method. Ryzen has shown many problems with memory. When you have Windows up, does all 32 GB of memory show in the Task Manager/Performance? If all else fails remove all but one memory stick and see if you can install. Google gets lots of hits on "The installation failed in the SAFE_OS phase with an error during BOOT operation", some with solutions. Please take a look and see if any apply to your situation. Good luck and enjoy, John.
EDIT: Things to look at and/or try: When booted back into 2012, see if you can find a setuperr.log file concerning the 2016 installation. Boot to BIOS and "Load UEFI defaults", F9, then Save and Exit. I assume you are booting the USB stick in UEFI mode when using GPT disk? Edited by MisterJ - 18 Aug 2017 at 8:17am |
|
Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD
|
|
kwagenknight
Newbie Joined: 17 Aug 2017 Status: Offline Points: 4 |
Post Options
Thanks(0)
|
Thanks for the reply!
So I have the Taichi x399 running an AMD Threadripper 1950X liquid cooled, 32GB (4x8gb) GSkill 3200 RAM. Im using 3 Samsung 960PRO M.2 NVMe drives. I can and have easily installed Server 2012r2 after the initial install failure of Server 2016. Once I had 2012r2 installed I then attempted to install Server 2016 and it got to the reboot stage of the install of 2016 then upon boot to complete 2016 install it froze at the same spot as the attempt from the USB fresh install where the Windows logo appears and then it should have the loading circle animation and that animation never appears and it sits not doing anything. When I restarted after that freeze it booted back to Server 2012r2 and told me it failed to install and said "The installation failed in the SAFE_OS phase with an error during BOOT operation" I believe that is a BIOS or board issue preventing the install. As a test I actually installed it on my desktop running a Ryzen 7 1700X setup and it installed fine. I had also tried the GPT vs MBR and a few other options available in Rufus with no success, and like I mentioned the same USB install worked on my other machine.
|
|
MisterJ
Senior Member Joined: 19 Apr 2017 Status: Offline Points: 1097 |
Post Options
Thanks(0)
|
Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD
|
|
kwagenknight
Newbie Joined: 17 Aug 2017 Status: Offline Points: 4 |
Post Options
Thanks(0)
|
Post Reply | Page <1 234 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |