AGESA 1.0.0.6b

Alban wrote: Hey, Guys I need a little help here. I bought these G.Skill Trident Z 3200Mhz RAM (F4-3200C16D-16GTZKY), they are working at 2133Mhz on my AB350 Pro4. I managed to get up to 2400Mhz by activating XMP Profile but that's it. I've been reading some of yours post and reply but I'm not self-confident about setting up the BIOS manually. I'm a kind of dumb. Does somebody can help? I really love my RAM's and I wanna achieve a decent RAM frecuency. Here are my PC specs: Ryzen 7 1700 without OC Trident Z 3200Mhz Asrock AB350 Pro4 (bios 3.30) Gigabyte GTX 1080 Ti (N108TGAMINGOC-11GD)

Hey Alban!

The memory model you specified is not listed in the QVL for this board at all (http://www.asrock.com/mb/AMD/AB350%20Pro4/#Memory). There is a chance you won't get the 3200.

From what I've heard around the web, Ryzens go very well with Flare X. Check my sig to see what I'm running. The RAM went to 3200 CL14 on the first click in UEFI.

I really hope someone can bring you better news!

rec is first reccomended setting to try
alt is the alternative
max is the value not to exceed

also start off with clicking safe setting this should allow any cpu/board to use that setting for ram

most can use fast setting

extreme would require a decent cpu (silicone lottery) a decent board and a decent power supply

if your seeming to get worse
do a full cmos reset
power cable out
bios battery out
press power switch and hold 5 seconds
wait 5 mins and reconnect battery and power cable and reboot

I tried my best but cap is 2666 16-17-17-35.

Edited by Mavitis - 20 Nov 2017 at 8:48pm

datonyb wrote: chompers wrote: Does anyone have the AB350 Pro 4 board? I cannot seem for the life of me to get this RAM below, to post at 2888. It runs fine at 2666mhz. I've tried manually doing timing configs, maybe I should just sell the ram and get something better? https://www.amazon.ca/Corsair-Vengeance-3000MHz-Desktop-Memory/dp/B01EI5Z2T6/ref=cm_cr_arp_d_product_top%3Fie=UTF8 follow the link and instructions in the post above it may well help you get the ram working stable at 2933/3066 that program has been very very succesful

Which link?
Anyways, I did get to 2933, by adjusting the Dram voltage, VDD to 1.35, and Proct to 48ohms. It seems to run stable so far

@x58haze

i cant tell for certain your ram stick are using samsung b dies (they could be as timings are pretty low)
but to be safe id suggest a few things
try setting either uhq xmp and using safe settings/ or use hq xmp for fast settings

the calculator version you have is also a very very early revision
you can download version 5 from here
http://www.overclock.net/t/1640919/ryzen-dram-calculator-overclocking-dram

which has a lot more features
well done for working out how to use it properly (something that amazes me so many people are having trouble following 1usmus very very clear instructions)

based on the above screenshot though
i would suggest for ryzen better chance of stability to change slightly these settings to the ABOVE screenshot
tcl 16
trrds to 6
trfc to 266
tcwl to 16
geardown to enable

and then try to test/ try lower tcl/tcwl as suggested only after some decent time spent using it

but i would really recommend using version 5 (newest)