ASRock.com Homepage
Forum Home Forum Home > Technical Support > AMD Motherboards
  New Posts New Posts RSS Feed - cannot start up from the network with Wake On Lan
  FAQ FAQ  Forum Search Search  Events   Register Register  Login Login

cannot start up from the network with Wake On Lan

 Post Reply Post Reply
Author
Message
pan883 View Drop Down
Newbie
Newbie


Joined: 06 Aug 2017
Status: Offline
Points: 6
Post Options Post Options   Thanks (0) Thanks(0)   Quote pan883 Quote  Post ReplyReply Direct Link To This Post Topic: cannot start up from the network with Wake On Lan
    Posted: 22 Sep 2017 at 3:38pm
I want to start with Wake On Lan from the power off state on Win10, but I can not do it. 

X370 Gaming K4 BIOS set the following setting to Enabled.
1. Advanced / ACPI Configuration / PCIE Decices Power On
2. Boot / Boot from Onboard LAN
I also tried making the latest version of Intel's network driver, but it does not change.

Thanks for help in advance.

Back to Top
ASRock_TSD View Drop Down
ASRock_Official
ASRock_Official


Joined: 20 Mar 2015
Status: Offline
Points: 8727
Post Options Post Options   Thanks (0) Thanks(0)   Quote ASRock_TSD Quote  Post ReplyReply Direct Link To This Post Posted: 22 Sep 2017 at 3:45pm
Dear pan883,

Greetings, this is ASRock TSD.


Please refer to the following steps for setting up Wake On Lan function:
1. BIOS setting:
Step1: Power on the system.
Step2: When POST screen is displaying then press the keyboard "Del" key to enter to the BIOS setting.
Step3: Switch to Advanced page, select ACPI Configuration, change PCIE Devices Power On to Enabled.
Step4: Press "F10" key to save the BIOS setting and restart the system.

2. Network adapter settings:
Step1: Start Windows and open Device Manager.
Step2: Expand "Network adapter", right-click "Intel (R) I 211 Gigabit Network Connection", and click "Properties".
Step3: Select the "Power Management" tab.
Step4: Please check "Enable computer to release standby state on this device".
Step5: Next, click the "Advanced Settings" tab, select the "Wake on Magic Packet" from the "Property" column, confirm that the "Value" is "Enabled" and click the "OK" button.

3. Check the power option:
Step1: Open the Power Option item in control panel.
Step2: Click the Choose what the power buttons do link.
Step3: Click Change settings that are currently unavailable.
Step4: Clear the Turn on fast startup(recommend) check box.
Step5: Click Save changes.
After above setting, WOL function should work properly.


Thanks!

All the best,
ASRock TSD

Back to Top
Kagey_bee View Drop Down
Newbie
Newbie


Joined: 01 Nov 2017
Location: Australia
Status: Offline
Points: 1
Post Options Post Options   Thanks (0) Thanks(0)   Quote Kagey_bee Quote  Post ReplyReply Direct Link To This Post Posted: 01 Nov 2017 at 3:49pm
These instructions dont work.

I've enabled everything I need to in bios. I've followed the instructions in Windows the best I can. However they don't seem to be 100% accurate to what I see in Windows 10.



This image shows an example of what in see. Not actually taken from my pc. But it's the same. No "Enable computer to release standby state on this device" option.

Power options regarding fast startup also don't exist.
Back to Top
hellsolo View Drop Down
Newbie
Newbie


Joined: 25 Jun 2018
Status: Offline
Points: 1
Post Options Post Options   Thanks (0) Thanks(0)   Quote hellsolo Quote  Post ReplyReply Direct Link To This Post Posted: 25 Jun 2018 at 3:05am
Hello, I was looking for a solution to the problem with WOL and found, specially registered here to share with you. I have the same motherboard. In order for everything to work, download the driver for the network adapter from the official Intel site, and in his settings put a tick opposite - "WOMP from power off state". In BIOS, turn on the PCI power. Hope i am helped you.
Back to Top
ggalt View Drop Down
Newbie
Newbie
Avatar

Joined: 04 Feb 2019
Status: Offline
Points: 1
Post Options Post Options   Thanks (0) Thanks(0)   Quote ggalt Quote  Post ReplyReply Direct Link To This Post Posted: 04 Feb 2019 at 3:00am
Any suggestions for Linux? Loading a device driver (windows based) or using the Windows settings dialog is not an option.
Back to Top
AntoMac93 View Drop Down
Newbie
Newbie
Avatar

Joined: 03 Apr 2020
Status: Offline
Points: 2
Post Options Post Options   Thanks (0) Thanks(0)   Quote AntoMac93 Quote  Post ReplyReply Direct Link To This Post Posted: 03 Apr 2020 at 7:20am
same problem, different motherboard (Z390 xtreme4) with bios 4.30 ... I have xigmanas (FreeBSD) as a system.

I await solutions, I have also opened a private ticket.
Back to Top
xboxbml View Drop Down
Newbie
Newbie


Joined: 23 Aug 2020
Status: Offline
Points: 1
Post Options Post Options   Thanks (0) Thanks(0)   Quote xboxbml Quote  Post ReplyReply Direct Link To This Post Posted: 23 Aug 2020 at 10:02am
Originally posted by ASRock_TSD ASRock_TSD wrote:

Dear pan883,

Greetings, this is ASRock TSD.


Please refer to the following steps for setting up Wake On Lan function:
1. BIOS setting:
Step1: Power on the system.
Step2: When POST screen is displaying then press the keyboard "Del" key to enter to the BIOS setting.
Step3: Switch to Advanced page, select ACPI Configuration, change PCIE Devices Power On to Enabled.
Step4: Press "F10" key to save the BIOS setting and restart the system.

2. Network adapter settings:
Step1: Start Windows and open Device Manager.
Step2: Expand "Network adapter", right-click "Intel (R) I 211 Gigabit Network Connection", and click "Properties".
Step3: Select the "Power Management" tab.
Step4: Please check "Enable computer to release standby state on this device".
Step5: Next, click the "Advanced Settings" tab, select the "Wake on Magic Packet" from the "Property" column, confirm that the "Value" is "Enabled" and click the "OK" button.

3. Check the power option:
Step1: Open the Power Option item in control panel.
Step2: Click the Choose what the power buttons do link.
Step3: Click Change settings that are currently unavailable.
Step4: Clear the Turn on fast startup(recommend) check box.
Step5: Click Save changes.
After above setting, WOL function should work properly.


Thanks!

All the best,
ASRock TSD



This totally worked! Thanks!
Back to Top
Tippi View Drop Down
Newbie
Newbie


Joined: 06 Nov 2020
Status: Offline
Points: 1
Post Options Post Options   Thanks (0) Thanks(0)   Quote Tippi Quote  Post ReplyReply Direct Link To This Post Posted: 06 Nov 2020 at 8:58pm
For Linux you can follow this instructions:
https://wiki.ubuntuusers.de/Wake_on_LAN/ (german)
https://help.ubuntu.com/community/WakeOnLan (english)
(should be the same on other distributions)

Only one important step:
Use ethtool to set wol for the network interface to state g.
This must be done at every start, so choose for example the systemd method.
Back to Top
kwakker View Drop Down
Newbie
Newbie


Joined: 22 Jun 2021
Location: Eindhoven
Status: Offline
Points: 15
Post Options Post Options   Thanks (0) Thanks(0)   Quote kwakker Quote  Post ReplyReply Direct Link To This Post Posted: 22 Jun 2021 at 10:57pm
I found out that for the DeskMini H470 a display MUST be connected and powered on (standby is fine) before the DeskMini will boot.
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.04
Copyright ©2001-2021 Web Wiz Ltd.

This page was generated in 0.125 seconds.