Where is the error?

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   x399 professional
g.skill 4x8gb ddr4-3200 cas 14 trident z

Mobo came with bios 1.4 and booted fine with all 4 sticks, but memtest7 only showed 16g. So I flashed to bios 1.8 and it wouldn't boot up with anything in either D1 or D2, but I was able to get it to work with 3 sticks even at xmp and memtest stable overnight, which now saw 24g with the bios update.

I flashed to 1.7 due to another guys post here who had a similar problem with 1.8, and it boots up and the bios sees quadruple channel memory, but memtest still only sees 24g.

I flashed with just two good sticks back to 1.8 and still the same state as before. It seems to be either a bad MOBO or bios. I can swap out sticks and any work fine on 6 of the slots, but none work in the d1 and d2 slots it seems.

When it is stuck in a boot loop it seems to be error code c0.

Not sure what to do or whose fault it is; I guess it could be cpu but I'm thinking mobo, so I sent asrock technical support an email. Should it boot with just 1 stick in d1 or d2?

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
jjoshua2 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 27 Nov 2017 Status: Offline Points: 6	Post Options Post Reply Quote jjoshua2 Report Post Thanks(0) Quote Reply Topic: Where is the error? Posted: 27 Nov 2017 at 11:22pm
	x399 professional g.skill 4x8gb ddr4-3200 cas 14 trident z Mobo came with bios 1.4 and booted fine with all 4 sticks, but memtest7 only showed 16g. So I flashed to bios 1.8 and it wouldn't boot up with anything in either D1 or D2, but I was able to get it to work with 3 sticks even at xmp and memtest stable overnight, which now saw 24g with the bios update. I flashed to 1.7 due to another guys post here who had a similar problem with 1.8, and it boots up and the bios sees quadruple channel memory, but memtest still only sees 24g. I flashed with just two good sticks back to 1.8 and still the same state as before. It seems to be either a bad MOBO or bios. I can swap out sticks and any work fine on 6 of the slots, but none work in the d1 and d2 slots it seems. When it is stuck in a boot loop it seems to be error code c0. Not sure what to do or whose fault it is; I guess it could be cpu but I'm thinking mobo, so I sent asrock technical support an email. Should it boot with just 1 stick in d1 or d2?

jjoshua2 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 27 Nov 2017 Status: Offline Points: 6	Post Options Post Reply Quote jjoshua2 Report Post Thanks(0) Quote Reply Posted: 27 Nov 2017 at 11:31pm
	It doesn't boot with just 1 stick in d1 or d2, but does with just 1 stick in c2 on the 1.8 bios. Tested 1.7 bios same deal. So RMA the motherboard? or CPU too? Edited by jjoshua2 - 27 Nov 2017 at 11:40pm

datonyb Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 11 Apr 2017 Location: London U.K. Status: Offline Points: 3139	Post Options Post Reply Quote datonyb Report Post Thanks(0) Quote Reply Posted: 28 Nov 2017 at 12:44am
	remove and reseat the cpu
	[url=https://valid.x86.fr/jpg250][/url] 3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold