X399 Taichi pci.sys windows 7 x64 stop d1 bsod

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I was installing from DVD on an MSI X399 Sli Plus and Windows 7 blue screened all the time. Wouldn't even start to decompress the install files. I replaced memory and reset board to defaults. Finally took board & cpu back after i could only install Windows 10 and only with one memory stick. Got intel 7820x and Windows 7 was a breeze. I suspect it's something with Threadripper because Ryzen installs fine. I don't know i'll switch back to AMD after this experience.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
stevie316 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 03 Jan 2018 Status: Offline Points: 2	Post Options Post Reply Quote stevie316 Report Post Thanks(0) Quote Reply Posted: 03 Jan 2018 at 9:24am
	I was installing from DVD on an MSI X399 Sli Plus and Windows 7 blue screened all the time. Wouldn't even start to decompress the install files. I replaced memory and reset board to defaults. Finally took board & cpu back after i could only install Windows 10 and only with one memory stick. Got intel 7820x and Windows 7 was a breeze. I suspect it's something with Threadripper because Ryzen installs fine. I don't know i'll switch back to AMD after this experience.

ssateneth Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 19 Oct 2017 Status: Offline Points: 129	Post Options Post Reply Quote ssateneth Report Post Thanks(0) Quote Reply Posted: 17 Dec 2017 at 12:41pm
	1D STOP error and IRQL_NOT_LESS_OR_EQUAL lead to general memory and/or CPU instability. Please remove all overclocks, load all optimized defaults, and turn off core performance boost and report back if issue continues. edit: after attempting some Win7 installs myself, I am also getting the same issue, STOP error 1D with pci.sys. All UEFI settings were set to default, tried disabling IOMMU, disabling SMT (hyperthreading), disabled 1 zeppelin die, Win7 installer eventually BSOD's, sometimes when loading from USB, something when decompressing the OS from USB (stage 1 install), and once during stage 2 install (after USB has copied to hard drive). Haven't been able to complete the install yet. Something is up indeed. I wanted to try Win7 because I get stutter issues with Win10. Edited by ssateneth - 26 Dec 2017 at 1:42am
	MB: X399 Taichi, UEFI L3.32 VGA: EVGA 1080 Ti FTW3 PSU: Seasonic PRIME 1300 W PLATINUM CPU: AMD Ryzen Threadripper 2950X MEM: 4x16GB, 3600MHz G.Skill Trident Z F4-3600C17Q-64GTZKW

PlazmaBern Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 01 Dec 2017 Status: Offline Points: 7	Post Options Post Reply Quote PlazmaBern Report Post Thanks(0) Quote Reply Posted: 15 Dec 2017 at 10:39pm
	MisterJ, No AMD drivers are installed, I wanted to try it out-of-the-box as the windows installation covered every device driver during installation. It is currently running version 1709 build 165299.125. I will try to get the dump uploaded soon. Thanks. Regards, Bern
	X399 Taichi, Threadripper 1950X, 2x Samsung 960 EVO NVME, G.Skill Ripjaws V Series 32gb 4x8gb, 2x Asus GeForce GT710 2gb, win 7 64 bit, bios 2.00

MisterJ Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 19 Apr 2017 Status: Offline Points: 1097	Post Options Post Reply Quote MisterJ Report Post Thanks(0) Quote Reply Posted: 15 Dec 2017 at 3:35am
	PlasmaBern, please hit Windows Key-R and type winver, then enter. Post the total version and patch level. Can you upload the minidump to a place where I can access it? If your minidump folder has several files please compress and upload it. Some are complaining about the latest versions of W10, but I do not know what symptoms they are having, just that they are avoiding it. I am running Version 1709 (OS Build 16299.125), just updated. No complaints so far. Thanks and enjoy, John. EDIT: When you say, no third party drivers, did you install the AMD chip set drivers from here:? http://support.amd.com/en-us/download Please do, if not. Edited by MisterJ - 15 Dec 2017 at 3:38am
	Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD

PlazmaBern Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 01 Dec 2017 Status: Offline Points: 7	Post Options Post Reply Quote PlazmaBern Report Post Thanks(0) Quote Reply Posted: 15 Dec 2017 at 2:53am
	Hi MisterJ, The OS has been upgraded since we last talked to windows 10 x64 version 1709. The machine was stable for a couple of days, then out of the blue, it bluescreened again with win 10. I have provided some debugging details below. Hopefully this info may shed some light on this problem. This is just a straight install, no third party drivers, all MS provided. Regards. BugCheck A, {38, 2, 0, fffff80275c2e9e0} Probably caused by : memory_corruption Followup: memory_corruption --------- IRQL_NOT_LESS_OR_EQUAL (a) An attempt was made to access a pageable (or completely invalid) address at an interrupt request level (IRQL) that is too high. This is usually caused by drivers using improper addresses. If a kernel debugger is available get the stack backtrace. Arguments: Arg1: 0000000000000038, memory referenced Arg2: 0000000000000002, IRQL Arg3: 0000000000000000, bitfield : bit 0 : value 0 = read operation, 1 = write operation bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status) Arg4: fffff80275c2e9e0, address which referenced memory READ_ADDRESS: unable to get nt!MmSpecialPoolStart unable to get nt!MmSpecialPoolEnd unable to get nt!MmPoolCodeStart unable to get nt!MmPoolCodeEnd 0000000000000038 CURRENT_IRQL: 2 FAULTING_IP: nt!MiResolvePageFileFault+f1c fffff802`75c2e9e0 488b4238 mov rax,qword ptr [rdx+38h] CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: CODE_CORRUPTION BUGCHECK_STR: 0xA PROCESS_NAME: svchost.exe Edited by PlazmaBern - 15 Dec 2017 at 2:54am
	X399 Taichi, Threadripper 1950X, 2x Samsung 960 EVO NVME, G.Skill Ripjaws V Series 32gb 4x8gb, 2x Asus GeForce GT710 2gb, win 7 64 bit, bios 2.00

MisterJ Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 19 Apr 2017 Status: Offline Points: 1097	Post Options Post Reply Quote MisterJ Report Post Thanks(0) Quote Reply Posted: 06 Dec 2017 at 8:57am
	JUANNY, here is what AMD thinks about AMD SATA drivers for TR, in GREEN: PlasmaBern, I got my RMAed board back yesterday and got it running this morning. Not hearing from you sounds hopeful. Hope no BSODs. Enjoy, John.
	Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD

JUANNY Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 13 Oct 2017 Status: Offline Points: 50	Post Options Post Reply Quote JUANNY Report Post Thanks(0) Quote Reply Posted: 05 Dec 2017 at 12:57am
	keep in mind that when you install the chipset drivers the amd sata drivers DO NOT install by default. I had to go through win 10 device manger and point to the extracted c\amd folder
	Asrock X399 Fatality Pro Gaming Bios 2.0 Threadripper 1950X Cpu cooler Enermax 360 mm TR4 GSkill 64 GB F4-2933C14Q-64GFX Windows 10 X64 PRO Version 1709 Build 16299.19 2X EVGA 1080 TI in SLI mode

PlazmaBern Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 01 Dec 2017 Status: Offline Points: 7	Post Options Post Reply Quote PlazmaBern Report Post Thanks(0) Quote Reply Posted: 04 Dec 2017 at 10:50pm
	Hi John, Video drivers are latest from Nvidia. Currently, there is nothing overclocked on the motherboard.The chipset drivers have been downloaded from AMD this morning. Gonna give that a try and see if that helps to resolve. -Bern
	X399 Taichi, Threadripper 1950X, 2x Samsung 960 EVO NVME, G.Skill Ripjaws V Series 32gb 4x8gb, 2x Asus GeForce GT710 2gb, win 7 64 bit, bios 2.00

MisterJ Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 19 Apr 2017 Status: Offline Points: 1097	Post Options Post Reply Quote MisterJ Report Post Thanks(0) Quote Reply Posted: 04 Dec 2017 at 4:35am
	PlasmaBern, I am no expert at reading dumps, but I suspect the video drivers. Do you have the latest from nVidia? Are both cards exactly the same? Have you tried one at a time, or moved among various slots? Did you install the latest AMD Chip Set drivers? Is there any chance you try W10? Good luck and enjoy, John.
	Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD

MisterJ Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 19 Apr 2017 Status: Offline Points: 1097	Post Options Post Reply Quote MisterJ Report Post Thanks(0) Quote Reply Posted: 02 Dec 2017 at 6:39am
	PlasmaBern, you are welcome. Please be sure you you have installed the Chip Set drivers from here: http://support.amd.com/en-us/download They even offer W7 drivers! I use the right side - "Manually Select Your Driver". Also make sure you have the latest Video driver from the vendor. Is anything OCed? Thanks much for the specifications. Enjoy, John.
	Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD