Z370 Extreme4 XMP bug |
Post Reply | Page <1 34567 14> |
Author | |
Silver Werewolf
Newbie Joined: 08 Jul 2018 Location: Argentina Status: Offline Points: 3 |
Post Options
Thanks(0)
|
Worked Flode solution here too :D!
Asrock Z370 Extreme4 P1.80 Intel i5 8600K 2x8 16Gb 3200Mhz 16-18-18-36 Corsair Vengueance LPX EVGA GTS450 1GB GDDR5 25%OC Thank you so much hue hueeeee |
|
wiseude
Newbie Joined: 25 Jun 2018 Status: Offline Points: 1 |
Post Options
Thanks(0)
|
What about VCCST and VCCPLL?leave them unchanged? (as in, will they auto adjust by themselves if VCCIO and VCCSA are changed?)
|
|
eballen
Newbie Joined: 29 Jan 2018 Status: Offline Points: 14 |
Post Options
Thanks(0)
|
The 1.1v for VCCIO and 1.15 for VCCSA fixes my freezing issues. But I have another issue where my PC will randomly reboot itself when idle now..
|
|
wingman99
Newbie Joined: 22 Apr 2018 Status: Offline Points: 5 |
Post Options
Thanks(0)
|
Vccio to 1.1V and Vccsa to 1.15 does XMP work correctly?
|
|
xsafo
Newbie Joined: 29 Apr 2018 Location: Russia Status: Offline Points: 1 |
Post Options
Thanks(0)
|
Dear Sirs
My specs: CPU: Intel Core i7 8700K (no overclock) Motherboard: ASRock Z370 Extreme4 (1.80 BIOS) GPU: GIGABYTE GeForce GTX 1060 MINI OC [GV-N1060IXOC-6GD] Memory: 16Gb DDR4 3600MHz Patriot Viper 4 (PV416G360C7K) (2x8Gb KIT) SSD: Samsung SSD 750 EVO 120GB; ST1000DM003 1000GB; Power Supply: Enhance 600W [ATX-0260GA] System booted up only with one ram module, with two modules in dual channel configuration (installed A2 and B2 channel) computer couldn't boot up, even after reset the BIOS to Default Settings (clear CMOS Jamper). I have tried to set ram module alternately, they work one by one in any slot. I have tried to set memory timings manually with one ram module: - 15-15-15-36 and set DRAM Voltage to 1.35 V, and set DRAM Frequency [auto]. But after thaht computer couldn't boot up. - 15-15-15-36 and set DRAM Voltage to 1.35 V, and set DRAM Frequency [2133MHz]. But after thaht computer couldn't boot up. -17-19-19-39 and set DRAM Voltage to 1.35 V, and set DRAM Frequency [3600MHz]. But after thaht computer couldn't boot up. - tried loaded XMP Profile 1 and went to Voltage settings and set VCCIO to 1.10 and VCCSA to 1.15 , but after thaht computer couldn't boot up. Please send me the full BIOS settings. Does know the optimal voltages (VCCIO, VCCST, VCCSA) I should be using for my two modules ram type? Hopefully this can be fixed. best regards Xsafo
|
|
taskilein
Newbie Joined: 29 Apr 2018 Status: Offline Points: 1 |
Post Options
Thanks(0)
|
Hi,
I use the g.skill F4-3200C15D-16GTZ and max Settings with manuell Timings a 2900mhz. XPM Profil only freez on start. On a x370 AMD Board the RAM Working with 3340mhz. Edited by taskilein - 29 Apr 2018 at 6:29pm |
|
The Ravemaster
Newbie Joined: 28 Apr 2018 Status: Offline Points: 1 |
Post Options
Thanks(0)
|
Hi guys! I Have this mobo (AZ370 extreme4) for 2-3 months with a i5 8600K (not overclocked yet) and a pair of Corsair Vengeance LPX 3200 MHz PC4-25600 (2x8GB CL16) and the Flode's solutions works great for me. Before this my system was freezing in less than a minute with the XMP on. With the XMP off this machine works fine.
PD: I have 1.60 bios version. Thanks to Flode ;) Cheers.
|
|
razvan974
Newbie Joined: 28 Feb 2018 Location: Romania Status: Offline Points: 30 |
Post Options
Thanks(0)
|
16Gb ( 2x8), 3000, CL16 - mine
16GB (2x8), 3200, CL16 - tested only and works withouth problems , but now is in another PC Both kits buyed at the same time. |
|
wingman99
Newbie Joined: 22 Apr 2018 Status: Offline Points: 5 |
Post Options
Thanks(0)
|
Thanks for the information. I forgot to ask, what is the memory speed, size, and latency?
Edited by wingman99 - 24 Apr 2018 at 12:21am |
|
razvan974
Newbie Joined: 28 Feb 2018 Location: Romania Status: Offline Points: 30 |
Post Options
Thanks(0)
|
Yes i am using XMP and voltages autoset by motherboard in my case are:
VCCIO = 0,950 VCCST = 1,000 VCCSA = 1,200 Edited by razvan974 - 23 Apr 2018 at 5:56pm |
|
Post Reply | Page <1 34567 14> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |