2018 AMD X370 BIOS

Ottesen87 wrote: Memory oc seems to have improved a bit for me with 4.50 i can now run 2666mhz at 17 19 19 40 at 2T using this kit of mem CMU16GX4M2C3000C15 2400mhz was max before on 3.40 and nothing more no matter the timings, or voltage. so i guess thats a good thing. but still not the rated 3000mhz R7 1700x 3.9 ghz at 1.35v Gaming k4 2x8 GB 3000mhz ram CMU16GX4M2C3000C15

main timings shouldnt matter much
mainboard doin poor job with subtimings
can u show me your ddr4 settings? maybe we could get it higher than 2666 as u have single sided ram kits which should overclock better then mine (unless u have 4 kits)
i have dual sided 2x16GB rated at 3200, mobo qvl max 2933..same result with bios default sub timings...manualy setting sub timings got me to 3133 which  is super stable and much faster :)
at 3200+ i cant even post with only xmp timings (subtimings all on auto)
3333 is max where i can post with manual sub timings, but still 3200+ is unstable (but im getting closer)
also another question, u do use a2/b2 slots right?

Peter13779 wrote: Did I miss something? My taichi x370 is still @3.2 Bios and I can`t find any update. Would be nice to get my 3200 memory working with more than 2800 at its original timings and my crucial mx200 drives are still not working on all sata ports even with newest firmware on the ssd.

I asked @wardog in a PM. He said ASRock are to release updated UEFI for X370 Taichi in a matter of days.

Franksssss wrote: [URL=][/URL]Well I tried using amd cbs and the truth is that good. I am using the 1700 to 3.9ghz with 1.24v and the ram has been at 3200mhz with 14 14 14 36 1.35v. There is no way that another voltage takes me the dram, only 1.35v although I change the values. Does anyone know anything about it?

1.24?! Goddamn that's one helluva chip!

Can't find the C6 power state switch in the new BIOS... Was it renamed to something? Disabling C6 has worked around random lock-ups for me before and with this update they're back again. I can only find global C-state switch, which is a bit of an overkill for the situation.

elserge82 wrote: Franksssss wrote: elserge82 wrote: I have set p0 to 3.8 using AMD CBS and set manually my RAM to 2933 . the p state is working just fine no issue with rams also. the weird thingy is that windows task manager is reporting 4.4 ghz max cpu speed on all 12 threads while stressed. I used timing 14 14 14 28 2933 with xmp no problem. When I used the same with amd cbs changed it to 20 20 20 53 :S Please specify your ram.